Settings Saved
Any changes made to your settings have now been saved, and will stay with your Swiftpoint GT.
Move the underside switch to the ON (right) position to start using your mouse.
Restart Configurator Go to Swiftpoint.com
Please turn off 'Edge Gesture'
You must turn off 'Edge Gesture' before
using the Swiftpoint Manager App.
Start the configurator by holding the rear click button for 5 seconds
Go to customise settings
Go to set edge gesture
Set edge gesture to "off"
Hold rear click for 5 seconds
If you have already turned off 'Edge gesture', download the application below
Download Swiftpoint Manager
Back
How to configure the mouse Settings in your GT - Step 2
During configuration mode the mouse pointer will not be visible, only the
scrollwheel and mouse buttons can be used to navigate the configure menus.
To start configuration mode
Move the underside switch to the OFF (left) position,
then to the CONFIG (center) position and then:
Hold rear click for 5 seconds.
To exit configuration mode, move the switch underneath to the on position,
or select exit from the menus.
How to configure the mouse Settings in your GT - Step 1
Use the scrollwheel to cycle through the menus
Click the front button to choose an item.
Click the rear button to go back up a level.
Try it below
- Sample Menu Item A
- Sample Menu Item B
- Sample Menu Item C
- Sample Menu Item D
- Sample Menu Item E
- Sample Menu Item F
Back
Step 1 of 2
Next
Mouse movement is now LOCKED during configure mode
Use the Scrollwheel to move up and down the list
Left click (front), to choose the item
Right click (rear) to return to previous item
To exit configuration mode and save settings, switch mouse to ON position
-
(not used) Calibrate Up Pointer Direction
(not used) You can calibrate the up direction of this mouse if you desire to. *further instructions need to be put in here*
-
Calibrating Now
Move the mouse up until a circle is drawn.
-
Customize Settings
Click to change buttons assignments and, customise scroll and gesture settings
-
Configuration Reset
Default Configuration values for Windows use have been set.
-
Assign Actions to Buttons
Assign a key or command when both mouse buttons are held down
-
Single Tap
Set what the Gesture Stylus does, when engaged (pressed on the desk surface)
-
Front Click + Rear Click
Hold both buttons down together
-
Rear Click + Front Click
Hold both buttons down together
-
Assign Actions to Stylus
Assign a key or command to the Gesture Stylus
-
Touch Gestures
Only used by the Stylus Tip.
-
Edge Gestures (Enable / Disable)
Enable or Disable Edge Gestures and Zoom via Right click.
Needs the Touch Gesture App installed and running on Windows 8 or above.
-
Double Tap
Double Tap is only implemented if the Single Tap is set to Touch Gestures or No Action.
-
Horizontal Scroll Speed
Set how fast the screen scrolls / left right when using the Gesture Stylus
-
Vertical Scroll Speed
Set how fast the screen scrolls up / down when using the Gesture Stylus
-
Configuration Reset
Default Configuration values for Non-Windows use have been set.
-
Reset to Non Windows Defaults
This will reset the mouse to Non-Windows factor settings.
-
Customize Settings
Click to change buttons assignments and, customise scroll and gesture settings
-
Calibrating Now
Move the mouse up until a circle is drawn.
-
Configuration Reset
Default Configuration values for Windows use have been set.
-
Configuration Reset
Default Configuration values for Non-Windows use have been set.
-
Front Click + Rear Click
Hold both buttons down together
-
Rear Click + Front Click
Hold both buttons down together
-
Assign Actions to Stylus
Assign a key or command to the Gesture Stylus
-
Assign Actions to Buttons
Assign a key or command when both mouse buttons are held down
-
Edge Gestures (Enable / Disable)
Enable or Disable Edge Gestures and Zoom via Right click.
Needs the Touch Gesture App installed and running on Windows 8 or above.
-
Horizontal Scroll Speed
Set how fast the screen scrolls / left right when using the Gesture Stylus
-
Vertical Scroll Speed
Set how fast the screen scrolls up / down when using the Gesture Stylus
-
Single Tap
Set what the Gesture Stylus does, when engaged (pressed on the desk surface)
-
Double Tap
Double Tap is only implemented if the Single Tap is set to Touch Gestures or No Action.
-
Touch Gestures
Only used by the Stylus Tip.
-
Customize Settings
Click to change buttons assignments and, customise scroll and gesture settings
-
Reset to Non Windows Defaults
This will reset the mouse to Non-Windows factor settings.
-
Calibrating Now
Move the mouse up until a circle is drawn.
-
Configuration Reset
Default Configuration values for Windows use have been set.
-
Configuration Reset
Default Configuration values for Non-Windows use have been set.
-
Front Click + Rear Click
Hold both buttons down together
-
Rear Click + Front Click
Hold both buttons down together
-
Assign Actions to Stylus
Assign a key or command to the Gesture Stylus
-
Assign Actions to Buttons
Assign a key or command when both mouse buttons are held down
-
Edge Gestures (Enable / Disable)
Enable or Disable Edge Gestures and Zoom via Right click.
Needs the Touch Gesture App installed and running on Windows 8 or above.
-
Horizontal Scroll Speed
Set how fast the screen scrolls / left right when using the Gesture Stylus
-
Vertical Scroll Speed
Set how fast the screen scrolls up / down when using the Gesture Stylus
-
Single Tap
Set what the Gesture Stylus does, when engaged (pressed on the desk surface)
-
Double Tap
Double Tap is only implemented if the Single Tap is set to Touch Gestures or No Action.
-
Touch Gestures
Only used by the Stylus Tip.
-
Customize Settings
Click to change buttons assignments and, customise scroll and gesture settings
-
Calibrating Now
Move the mouse up until a circle is drawn.
-
Configuration Reset
Default Configuration values for Windows use have been set.
-
Configuration Reset
Default Configuration values for Non-Windows use have been set.
-
Front Click + Rear Click
Hold both buttons down together
-
Rear Click + Front Click
Hold both buttons down together
-
Assign Actions to Stylus
Assign a key or command to the Gesture Stylus
-
Assign Actions to Buttons
Assign a key or command when both mouse buttons are held down
-
Edge Gestures (Enable / Disable)
Enable or Disable Edge Gestures and Zoom via Right click.
Needs the Touch Gesture App installed and running on Windows 8 or above.
-
Horizontal Scroll Speed
Set how fast the screen scrolls / left right when using the Gesture Stylus
-
Vertical Scroll Speed
Set how fast the screen scrolls up / down when using the Gesture Stylus
-
Single Tap
Set what the Gesture Stylus does, when engaged (pressed on the desk surface)
-
Double Tap
Double Tap is only implemented if the Single Tap is set to Touch Gestures or No Action.
-
Touch Gestures
Only used by the Stylus Tip.
-
Customize Settings
Click to change buttons assignments and, customise scroll and gesture settings
-
Restore to defaults
Set to Windows default configuration
-
[OSX] LaunchPad [F4]
Go to System Preferences/Keyboard/Shortcuts to select functions such as Launchpad
-
Assign actions for Rear button+Stylus
Configure actions when holding rear button and stylus, while moving mouse in different directions while
-
[Windows] Charm Menu
Windows 8
-
[OSX] Next Window
This function needs both Rear Button + Stylus Left and Stylus Right to be set to "Next Window"
-
Generic
Place the cursor in the web browser url box
-
[Windows] Task View
Windows 10
-
[Windows] Next Window
This function needs both Rear Button + Stylus Left and Stylus Right to be set to "Next Window"
-
[Windows] Action Center
Windows 10