Swiftpoint Z3 "Joystick Outputs" setting doesn't seem to be remembered
Hello, I'm not sure if this is the right place, but I'm hitting a very annoying problem with my Swiftpoint Z3. It's essentially this problem, but I'm using a Z3 and I'm on macOS. My info: macOS Tahoe 26.6 Mouse connected via Swiftlink Mouse firmware:
Swiftpoint Z3 Tilt Getting Stuck / Not Releasing
Hello, I’ve had my Swiftpoint Z3 for a while now and overall I really like the mouse. However, I’ve been having an ongoing issue with the left and right tilt functions. The main problem is that the tilt input will sometimes get “stuck.” For example, if
Disappointed with purchase
I bought a Z3 recently and received it a few days ago. Unlike others who have had issues with the dongle not working after a firmware update, mine updated (both the dongle and the mouse) successfully without problems. I like the build quality of the mouse.
Z3 pointer lags behind on Wireless
So every now and then while only on Wireless, the pointer will just lag behind really bad for a few seconds and then pick back up and work like normal. I attached a video of it happening while playing Palworld but I've had it happen even with no programs
Lift off Input
Any plans to add lifting the mouse up as a trigger/input layer? Would be useful (not sure how far it can detect lift off sensor wise) for adding the ability to lift it up and have a whole new layer of commands available when in that state vs on pad.
Z3 More battery percentage display options in X1 Control Panel
It'd be nice to add options to show the battery percentage in more places. Option to show simple text when hovering over the X1 icon in the system tray. Could be a convenient time to display other device info, like device name and Profile. Related option
General UI Annoyances + Some bugs
I'm on Windows 10, on version 3.1.3.1 beta of the X1 Control Panel software These are my annoyances with the ui and, in some cases, what I think could be done to improve the ui and interacting with it I generally feel that the name expert mode and Simple
Analog Range cannot do anything other than joystick slider... technically
I am on Windows 10, on version 3.1.3.1 Beta of the X1 Control Panel With the deep-click analogue range, when the user adds an output action, the only option there is to click is the Joystick slider. But using the record keystrokes, I can force the use
block parent mapping doesnt block repeat from actions
What I want is a macro that, when pressed, will scroll down indefinitely, which can be done with a repeat from and stop looping macro. And then, when I press another button, it stops looping, and the second button starts another loop that scrolls out
Mouse Wheel Stock or Print?
Wondering when the mouse wheel will be available for purchase again or if there are plans to release (or sell) the 3d print info/model/data? should i purchase the main button and scroll wheel pcb now or is it safe to wait for the wheel to be back in stock
Profile length (character count)
This is a bit... dunno? There seems to be a 18 character name length limit for profiles (including spaces), resulting in actually severe limitations for displaying the full name of certain games (even, or especially) in the software. Is this a hard limit
Anyone experimented with routing haptic output to the Z2?
One thing I've always missed about console gaming when using KBM is the lack of haptic feedback. I've done some surface-level research into if it's even possible to send haptic/vibration output to the Z2, and it _appears_ that it may be, but just curious
Anyone else having problems with Bartender on Mac?
I’m not 100% Swiftpoint/X2 is the issue here, just trying to track down the root cause. But I have a suspician that it’s clashing with how Bartender rearranges menu bar icons, causing them to be dragged off menu and thus hidden from displaying, even causing
Battery percentage stuck when charging
On the Swiftpoint Z3 (3.1.2.0 firmware) the battery percentage gets stuck around 32% when charging, this is shown on the OLED display and in the Swiftpoint X1 control panel. Turning the mouse off/on updates it and it shows the correct battery percentage.
"Game priority" mode
Hi swiftpoint team, here's a little quality of life suggestion: Once a game (a profile that is not default) is loaded, stay in the game's profile in X1 control panel for x seconds when alt-tabbing out of the game. If the game profile is being edited within
my z3 dosen't wor from unpacking
Hi, i would know if some users has the same problem. From the unpacking of my z3 (i was so happy) the tilt fonction seem to work, but when i pluged the adapter wireless nothing work. So i decided to plug with wired usb, but nothing work too. I updated
Battery percentage not accurate
The battery percentage is quite random, usually varies a 20% just but turning on and off the mouse, sometimes i look at it by lifting the mouse and its 95%, i look 30 mins after and its 73%, turn in off and on again and its 89%. This occurs all the time.
Directing actions to an unfocused app?
Is it possible to set some buttons to direct their output to an unfocused application? For example, If I'm reading a PDF, I'd like to copy some text into a separate notes app without leaving the PDF or removing focus from it. Another example would be
Symbols and special characters mapping
Hi guys, after receiving my Z3, I'm mostly very happy - especially with its capabilities to almost seamlessly replace my logi G604 (the one with the 6 side buttons, sadly discontinued). But one problem has surfaced that I haven't been able to adress in
Stop Z3 feedback on close window hover
Hello, Just got my Z3!! I'm really happy about it even if I'll need to get used to the new grip and wheel. But something new that I was not expecting is the feedback via small vibration when some action occur like hovering a close window button :/ I dont
Z3 Deep Click Calibration Seems Broken
I got my Z3 today, hooked it up and it auto loaded my existing profile. I have 45% force deep click mappings for LMB and RMB. I noticed that while the LMB seemed to work just as it did on my Z2, the RMB deep click was going off as soon as I pressed RMB
Z3 Dongle not detected after firmware update
So I have the new Z3, and within 15 minutes of using it, it wanted to update both the dongle and the mouse, so I update the mouse, since it asked for the mouse to be wired, I unplugged the dongle and updated the mouse. Now the mouse doesnt connect through
Z3 and x1 suggestions
Got my z3 last week and loving it so far. Just have a few suggestions/ requests for the future. One thing about my set up specifically is that I am using a hybrid pad. I am having some drag issues with the skates that are stock. It would be cool to see
Z3 receiver stuck as Bootloader
Recently, I purchased the Swiftpoint Z3 mouse, and it was working perfectly until around 8/17, when the receiver began disconnecting intermittently. Windows would display a "USB Device Not Recognized" error, and now the receiver will not connect at all.
Open Source Swiftpoint X1 Control Panel
Any chance Swiftpoint X1 Control Panel can be open sourced? If not, why? I'd be much happier submitting pull requests then creating posts / submitting tickets.
SwiftPoint Z series OLED Design
Made an OLED graphic this morning, with the new update being able to change these I figured I would share mine. Looks pretty neat inverted as well. Hope they add the ability to make animated ones like the stock Cube
Z3 Dualboot
Hi guys, I am using a Windows/Debian 14 dual boot on my laptop and one of the main reasons for me to order the Z3 was to be able to switch it easily between my PC and Laptop. Unfortunately dual boot and bluetooth is always a bit of an issue (same bluetooth
Is everyone's Z3 OLED as dim as mine?
I just got my Z3, and the OLED is so dim it's hard to see in a normally bright room. The Z2 next to it is bright and can be read from a metre away. I tried to do a photo to show the difference but the phone didn't even pick up the Z3's OLED. You'll have
Z3 Wireless Connection issues
I just got my Z3. Is anyone else having issues with the wireless connection? Mine seems to be losing the connection. The mouse will stutter heavily at times. I did update the firmware when I first got the mouse.
Battlefield 6 Profile for Z3
Looking for a starting profile for BF6. Without a profile, would I simply bind keyboard keys in the game's key bindings section and then map the same keys to the mouse buttons? Seems awkward. Is there delay or anything using this approach? Seems like
More Supported Game Mappings
We need more Official Mappings in the software. I've been hoping to see the games below get supported (And with support for Tilt Controls) Zero Hour Elite Dangerous Black Desert Online Tarkov Enlisted Squad
How good is the support?
Hi all, I came across the Swiftpoint Z3 on their Facebook ads recently. Never heard of the brand before until now, which is funny because I live in New Zealand, where the company is based. Anyway, I sent their sales team an email (more like filing a ticket),
Z(n) Gamepad Binder App: Binding Left/Right Force Clicks to Gamepad Left/Right Triggers and much more
Please see Github project: https://github.com/kircheisgreen/Z-n-Gamepad-Binder Code was based on ZRawSensorEventsSpecification.pdf from this thread: https://support.swiftpoint.com/portal/en/community/topic/cannot-map-axis-other-than-slider-to-a-force-button-in-x1
Tilt Angle display in X1 Control Panel
Recently received my Z3 and this is my first enthusiast level mouse and I'm enjoying it thus far. One of the features I was looking forward to using was the tilt gesture, but dialing in the angle is difficult as I don't play on a completely level surface,
Z3 on a metal desk
Just received my Z3 and I realized that I'm using a desk that's primarily metal (SecretLab Magnus). The top of the desk is intended to be a mouse-friendly surface, but the Z3's bottom magnets are understandably causing an awful lot of drag. I'm sure I
Tilt Sensitivity on Z3
I just got my Z3 and am finding the vertical tilt is less sensitive than the Z2 (same profile). That is, I need to tilt the mouse considerably more to get the tilt to register (which is tilt scroll for me). Anyone experience this?
Add connection selection configuration to X1
I'd love to have the different bluetooth device pairings and swiftlink available as options to set in expert mode under "Select output type". It would be a very nice QoL change because i work with multiple machines in the same room and being able to swap
Softwuare featured
Hey. So i would like to ask if it would be possible to add a software feature that disable the sensor when pressing a mouse button? When it gets hot it can be a little tricky to lift the mouse, so being able to disable the sensor and dragging it back
Z2 not detected when returning from sleep
New Win 11 install. Changed Z1 for Z2 when it arrived. All seemed to be working just fine but mouse is not detected by X1 software after resuming windows from sleep. Cursor is still working but buttons do not register and logo light is off. Disconnecting
Z2 MB4 side button broken at both points of contact
My mouse button 4 broke from the 2 contact points that it was attached to. I don't see any mouse button 4 or 5 packs on the Swiftpoint store, and I don't know if I can get my mouse replaced.
Next Page