Swiftpoint Tracer / Z: Enhancements & Suggestions
Two enhancements / suggestions that have come to mind are: for the Mouse Wheel Button and the Fingertip Inserts of the Swiftpoint Tracer / Z. And I would like to stress that these are just personal preferences from my own experience. Mouse Wheel too hard
Delay profile auto-switch when navigating between desktops
An option to switch profiles upon button release for the auto-switch mode to kick in. This will fix getting stuck on certain windows when navigating between desktops due to profile changes.
Can I keep loops running after switching profiles?
Having buttons held down is good, but to have this effect for scrolling I need to use a loop. I put these kinds of commands in a sub-profile, leaving my main one for quick single actions and default mouse buttons. I then hold down an unused button to
Keypad binds work as actions
Keypad binds act as if numlock is disabled. Numpad 1 = End, Num 2 = Down, etc. Version: 2.0.9.0 Example: Disregard #2 being present, only a visual example.
Swifpoint Z mapping gestures for Solidworks
Hello Swiftpoint Team, I recently purchased a Swiftpoint Z mouse, after looking at some reviews on YouTube. One of the reviews suggested the gyroscopic gestures could also be used for 3D modelling, so I was very interested and eager to try it out, even
Right trigger double click
I've recently noticed an issue with my Swiftpoint Z's right trigger switch where it will occasionally repeat the output assigned to the button. For my case, I've assigned Ctrl + W, so close tab for web browsers, but maybe every 3-4 times I pull it, it
Disassembly instructions?
My middle mouse button failed. It was only accepting clicks at a high force level, and now is not registering at all. I was attempting to clean the mouse and removed all 5 screws from the bottom. Unfortunately, I cannot figure out what the next step
Difference between Creator and Z?
To me, the new Creator looks like the Z, but white (yay dirt marks) and missing some of the "fancy" features like takeoff, LED cube, and OLED screen. Is that it or am I missing something that makes this unique?
I don't know if Creator and Z's software can be used universally
I don't know if Creator and Z's software can be used universally
Driving/Tilting
So, I have had the mouse since the release, and I have never learned how to use it with the thing that goes on the bottom so you can drive. I don't know if I need to set it up in the software or something, but could someone help me? I also wanted to know
if it‘s possible to add “block any further outputs” function to “mouse movement ”
What I want to achieve : sorry the langue is chinese ,it's about media what I configure in x1 ass you can see ，the “movement” can trigger the “press/release”，so i have to set “movement left” to “play/pause”。 if “movement”have the “block any further
Production problems
I came across a Twitter post from you guys from October where you mentioned that due to the pandemic you couldn't manufacture the Z anymore. Since I don't plan on giving up having a Z ever again I was wondering whether this was still the case and I am
Is the Swiftpoint Z ever coming back?
The Swiftpoint Z seems to be discontinued. Is there a chance it might come back into production? I recently purchased a Swiftpoint Tracer and I'm very happily impressed. After doing a little digging, I learned there was a previous version that had more
Since a recent windows 10 update auto-switch seems to malfunction
Heya. So. this has only been happening since i last updated windows 10. What happens is I'll start a windowed app, like a browser, and after a random amount of time the profile will automatically switch to the default profile. The only way to fix is is
Create mouse features?
hi, there wasn't a Create mouse category but... I feel its a bit unclear what features the new create mouse has. it says 2 presure sensor buttons, but what buttons are those? the main or the fingertip buttons? second i am a bit curiouse if the create
Random Output
I just recently discovered this forum recently despite having owned the Swiftpoint Z more than 2 years As I was reading some of the topics, i came across a discussion for a feature I hoped you would include. Randomize output. I use it for work similarly
MS Office, Excel & Moving Window with WinKey + Left/Right/Up/Down
By simply recording a keymap with WinKey + Left/Right/Up/Down, for almost all MS Office Software, I haven't noticed any problems, EXCEPT for Excel (you just gotta love Microsoft man). This is why I conclude the problem is with Excel, not Swiftpoint. One
Wrist strain
I was happy to get my Swift Z mouse today. After 30 minutes of using I felt wrist strains and it's still on going. I didn't have that with my regular mouse and the strains go away when I switch to my regular mouse. What am I doing wrong or is it possible
Default Folder to Export Mappings
Every time I export my mappings file, Swiftpoint X1 sends me to "...\Documents\Swiftpoint X1 Settings" by default. It gets a bit tedious to go to my preferred folder every time. Is there a way to change the default folder save location? Maybe there's
Lost Ark profile?
Hi all! Does anyone have a swiftpoint Z/tracer profile for Lost Ark? For those who dont know the game, Lost Ark is a new action MMORPG (kind of a mix of diablo and wow in some ways, with korean rpg elements as well) released recently worldwide by Amazon
How to create a toggle mouse button? and how to make vibration during toggle mode?
I have two 3D flight combat games in which I assign boost to the middle mouse button in both. The thing is in order to continuously boost I have to hold onto the middle mouse button. I don't want to do that, since those games do not provide a toggle
When I make a change in Swiftpoint software, my Z mouse freezes for upwards of thirty seconds
Hi. When I make a change in the Swiftpoint software, like change a mouse button bind, my Swiftpoint Z mouse will completely freeze for upwards of thirty seconds. No buttons work, tilting into config mode doesn't work and the mouse pointer freezes. This
Uploaded Profiles
Hi, I recall there previously being shared profiles for specific games on the forum you could download but I can no longer them? Looking for profiles for World of Warcraft or Lost Ark if anyone has any. There was definitely some profile for binding your
How do I bind left/right tilt and movement on the mouse X-plane separately in Star Citizen
I'm playing Star Citizen (Alpha 3.16). I've been trying to bind the Swiftpoint Z: Yaw - mouse movement on the X-plane Pitch - mouse movement on the Y-plane Roll - Left/Right tilt axis When I attempt to bind these, the game is seeing them as: Mouse Function
scrolling feature
is there any possible way to have 'up' and 'down' scroll remember last command to be able to cycle through a set of shared commands?? the app im using doesnt support this feature.
Some feedback and features I'd love to see on a future Z
Hi! I'm a 3d artist and I discovered your mouse about 2 years ago. and I LOVE it. it's the single greatest mouse I've ever used. I actually do a lot of video tutorials and stream on Youtube and Twitch and I love talking about this mouse on stream- https://youtu.be/pQdFAs1bnb4?t=2055
Profile Recovery
Howdy is there any why to pull profiles off the mouse? Had my 4th gen rig go down holding all my profiles, on the new laptop i download the software, but i doesn't see the profile held in the mouse's memory on the ( Z mouse). Trying to avoid pulling the
Troubleshooting Tracer buttons and game compatibility
Multiple buttons are not being detected in Diablo II: Resurrected. My right trigger is detected (as a , ), along with the two diamond shaped purple buttons (as mouse button 4 and 5) under the tracer logo. Those, plus left and right click, are the only
Looks like Swiftpoint Z no longer support Copy and Paste commands
I don´t, and really don´t want to use CTRL+C and CTRL+V I was able to select Copy and Paste feature from the commands available on the APP (Copy and for other button, Paste) Seems like these two features are now missing. Am I correct, and these two commands
"Repeat From" outputs "Times" value reset to 0 when its output list is viewed.
Steps to reproduce: Add a "Repeat From" output to any mapping. Set its "Times" attribute to any non-zero number. Save settings. Switch view to any other profile, then back to the profile with the "Repeat From" output. Its loop counter should still be
Repeat From Bug
I had some weird behavior before when I edited a button that looped a certain amount of times only to change back to infinite looping when i clicked to inspect it. I finally figured out tonight what was going was a bug that only occurred when i swapped
Exclusion list for app-switching
please add an exclusion or delay because i cant use this software with rewasd.
How do I make the Swiftpoint Z act like a joystick when titling the mouse?
With my Swiftpoint Z I have tried a few different games that I prefer to use a controller for movement over mouse/keyboard. However, the games are not recognizing me tilting the mouse as any kind of input. Is there a setting I need to change on the mouse
how can have a profile
hi where we can see the game customs profile or we can found it can any one show me about that ??
How to clean Swiftpoint Z
So I was wonder how anyone else that has a Z cleans their mouse with all of the really small groves and it being a somewhat sensitive mouse. Thanks!
Adding Xinput support to the Z
Just a small question here, I saw in a previous post that Xinput support was "planned at the beginning, but didn't make the cut and will be planned to be implemented in a future update down the road" or something along the lines of this. Is this true
Optic Sensor
On My Other Mice, The Sensor Glows Red. On The Swiftpoint Z There Is No Light. Is This Normal? I've Noticed That Its Become Borderline Unusable For Gaming. I've Messed With The DPI To No Avail.
Automatic Button Up Prompts
It would make configuring maps so much easier if I didn't have to repeat every command input twice for buttons I want to map a Press and Release binding for. Can we get an auto-close prompt on selection of Press on On Press mappings? This would be similar
Faster Mapping Navigation
I'd love to see some updates to enable faster navigation of the expert mode mapping sections of the X1 Control Panel. This could include: Better Tabbing (or Arrow Key support) Tab cursor is difficult to see (invisible for dropdowns). When on the Button
What's an Output Group
I'm new to the X1 Control panel (had the old Z control panel installed). What's an output group? Does it allow for tagging/transfer of assignments between buttons? Or, does it simply serve as a description for the user? I'm struggling to get the text
Next Page