Optic Sensor
On My Other Mice, The Sensor Glows Red. On The Swiftpoint Z There Is No Light. Is This Normal? I've Noticed That Its Become Borderline Unusable For Gaming. I've Messed With The DPI To No Avail.
Automatic Button Up Prompts
It would make configuring maps so much easier if I didn't have to repeat every command input twice for buttons I want to map a Press and Release binding for. Can we get an auto-close prompt on selection of Press on On Press mappings? This would be similar
Faster Mapping Navigation
I'd love to see some updates to enable faster navigation of the expert mode mapping sections of the X1 Control Panel. This could include: Better Tabbing (or Arrow Key support) Tab cursor is difficult to see (invisible for dropdowns). When on the Button
What's an Output Group
I'm new to the X1 Control panel (had the old Z control panel installed). What's an output group? Does it allow for tagging/transfer of assignments between buttons? Or, does it simply serve as a description for the user? I'm struggling to get the text
Different Switches for M1 and M2 click
I saw in a different thread about the Omron switches that are similar to the ones that come default from Swiftpoint for replacement, but I was wondering if anyone has any experience using something from Kailh (like the 4.0 or 8.0) or similar? Is this
Oled sreen
you should be able to watch a movie on the screen
Wireless Z
Hey there! First thanks for ur amazing products, and great quality. Using the Z intense now for 3 years and loved it, but unfortunatly the right mousbutton is about to die. Guess i ve to switch what really annoys me, but i really want/need a wireless
Swiftpoint Z: Tap and then release click. Also reduce holddown click time
As simple as: When press: Click. When released: Nothing. Then: End. Solved: The expert mode UI not quite intuitive, but realized there was a setting menu for both press and release. _ Second question: Can I reduce the amount of time the tap is being holded?
Auto-fire macro for jumping in halo?
Hi, How would I configure the RMB that when pressed, will jump repeatedly until I let go of RMB? I can already map space bar to the deep click but cannot figure out how to keep it constant.
Profile Sharing [Flight Simulator]
One of the major aspects of the Z, and from what I can tell the only thing that makes it different from the Tracer, is the compatibility intended with flight simulators. There are however no profiles built for flight simulation games or if they are I
How to use analog controls in Battlefield?
Hi, so I want to use the Z mouse normally when on foot in Battlefield (right now, the 2042 beta), but the tilt controls when piloting a heli or jet. I've enabled "joystick" as game controller type and mapped analog left/right and forward/back in the X1
Cannot Link Profile Switching to "Windows Apps" Games
I've tried changing the ownership and permissions to read the files in the "protected" windows apps files and even though I can access them, the X1 control panel cannot. Even when I run it as admin. I am able to navigate to the folders but when I try
How to add Microsoft Store/XBox Game Pass Games
Recently I've joined XBox Game Pass, which I love, and it's representing more and more of the games I play on my PC. Unfortunately, there seems to be no way to add Game Pass (or any Microsoft Store-originated) games, since there's no way for the user
Press [Press and Hold Down] command not "holding"
Hey all, I've recently tried to recreate some commands for an "auto run" function to help alleviate my carpel tunnel when playing games that require me told Shift + W. I have to physically hold down the button to get it to hold. Tried different buttons,
How do I get a replacement set of tilt feet?
The pandemic has had me move three times since it began, and the feet labeled '1' have gone missing from storage as they were on the mouse. How do I order a replacement tilt feet? I used the tilt feature 100% of the time and I want to use this mouse again
Swiftpoint X1 Control Panel not working
I've tried uninstalling and reinstalling, restarting my computer and changing install location, however the software will not start.
Oled screen fall off.
Hi The mouse screen fall of (first day of use) still with cable and working. Change or fixing? From Amazon. Except that great mouse for unreal engine.
MMB always at 100% force
I noticed recently that my MMB doesn't behave right, I had a deep click action set at >30% force, with default MMB behavior at <30%. OLED screen shows constant 100% force on MMB with lightest touch now. Also, no less than 60% force on LMB. I guess this
disabling auto update
I would like to find out if there is a way to stop the auto updates. I will manage checking and updating software. I would prefer not to have to resort to firewalling the software in, but will if its the only way.
Win 10 won't hibernate with Z/Tracer
Hi since I have been using swift point mice (both Z and Tracer)my computer wont go into hibernation when the computer is left alone I never realised it was the swift point mouse until I unplugged the mouse to do some cable management and within minute
Button dimensions
I was wondering if you could provide the exact dimensions of the right mouse button and the left mouse button to make custom griptapes.
Forum functionality
Would it be possible to upvote comments? If a thread is really long, being able to sort the replies by votes would be nice. In the profile of users on the forum, you gain exp by engagement, upvotes on comments do not need to be weighed as heavily as a
Switch to the last used Profile
A few days ago, my PC turned off unintentionally and after the reboot, all my profiles where lost. Since then, i try to recreate a config, without success.. I want a "Profile Change" to the last used Profile. When i tilt my mouse 1,5% to the left, my
Where can I find the 16 pre made profiles for gaming?
The page for the Swiftpoint Z says: "The Swiftpoint Z supports all software and games, and comes with 16 pre-made profiles for some of the leading titles in gaming." Where can I find these profiles? Pre-made profiles include: Apex Legends, Borderlands
Sharing profiles
I got the SwiftPoint Z mouse, still getting used to it, but so far love it. A question is why there are no pre-made profiles, everything need to be manually setup. Why cannot put online other people's profiles / games, so that can be easily downloaded?
Import doubles bindings
I noticed today: when I import a saved profile, on one of the mappings, it doubles every keybinding, so I have lmb bound twice, rmb twice and so on
Sharing profiles for productivity - Thread
Hi, There are few profiles in this new forum. I am sharing my profile for "desktop" general usage for all apps. It needs to be revised, but can hopefully be of use either if you want to copy or adapt some techniques I have developed or seen on the previous
Marco to press both mouse buttons
I just got my Swiftpoint Z and I'm really liking it. I'm struggling to figure out how to configure a macro to simultaneously press RMB and LMB. Is this possible?
Bug in Text String output action
Hi there, i might have found a bug with the output action "Text String". The string which should be entered is (1): KCi{]ar-4eL;TicG9+k9 Actually it writes (2): KCiÜ+arß4eLöTicG9`k9 (just written with the action) I guess its because i have a german keyboard
Quick record and create macro on the go
You can select one button of your mouse to start recording and then select other mouse key Perhaps add a setting to check as "macro holder" that key so you don´t mess up other macro keys while recording a macro After that you can start recording the macro
Is it possible to use the pressure clicking for sculpting in Blender?
It would be amazing for 3d sculpting if I could use my mouse for pressure sensitivity instead of a tablet. I'm not sure if you'd have to emulate pen input pressure for windows, or directly communicate with the Blender software. I'm tempted to purchase
Recalibration for Z's Deep Click Sensor
My Swiftpoint Z could not precept its all 5 pressure sensitive buttons correctly, when I press them, they just cannot reach Force 100%. I also didn't find any way to recalibrate it neither in mouse's user guide nor X1 control panel. By the way, where's
How can I use one input to modify the function of another input?
Hi there, are there anywhere other sites with more examples or tutorials? I am new to the Z and I find it difficult to assign the buttons if you have special needs :) I am a software developer so I am used to google and find stuff out on my own but this
JSON script reference
I'm trying to construct a complex macro that involves moving the mouse a predefined number of times and am wondering if this could be accomplished by hand coding the macro? In the mappings option I do not see a action for moving the mouse at all. Basically
Vibration when entering/exiting "Config Mode"
Hopefully this is a simple question, I want to do 1 of 2 things, either 1) turn off the ability to enter config mode when tilting the mouse or 2) simply turn off the vibration when entering/exiting config mode. Can someone help me with this? I cant seem
Support?
This should be interesting, the new support area is active right now as was the old one when it launched. Within a few months the support forum became a ghost town because literally no one responded to anything, not even the growing barrage of abuse at Swiftpoint and its non existence. I even emailed the MD to Express my concerns, couldn't even be bothered to reply. I own a Z mouse and in 27 years of PC gaming its the best mouse on the planet and I'll buy another, but the support? We'll see..
Z mouse modifications
Would anyone who has gone ahead in modifying their Z mouse, be able to tell me what mods they have done to their Z mouse. I have already gone ahead and put a DIY lizard skin grip on my Z, and am soon planning to replace the stock Teflon feet with Virgin
Profile Switching 'Names' on OLED not appearing when rotating mouse?
Okay, I submitted a ticket for this and then closed it, thinking I solved my own problem. I didn't, it just keeps coming back again and again, whenever I try to make a new profile. I will now copy and past my ticket below: ---- I am rather new so hopefully
Swiftpoint Z Vibration Motor
Hello Bryce, just a question whether the swiftpoint Z uses a linear resonating actuator aka a vibration motor that is capable of sharp sensations and not just a rumble?
What directory are profiles saved to?
Something is wrong with Swiftpoint X1 Control Panel and it will not launch. If I had to guess it became corrupted by an unstable overclock. I want to reinstall everything, but I want to backup my profiles first. I don't know what directory my profiles
Next Page