Swiftpoint Z - scrolling is too sensitive on OSX unless I replug it
Hello, I have this problem on OSX which is mentioned here by some Linux users too - the scroll gets jumpy sometimes, unless I replug the mouse. I is there a way to force-restart it for example? Replugging works but is a bit cumbersome. Loving Swiftpoint-Z
Buttons Keep repeating actions but the button is only pressed once
My "z" mouse has been repeating actions even though I only press the button once. For example: my Bottom Thumb button is "CTRL left" and its set to "press" because I need to hold it down. I have been doing this for the past 1 and a half years of owning
How do I create a profile that turns off the Swiftpoint Z?
Hi there, I need to create a profile that basically switches the mouse OFF, but still able to switch to the next profile to switch back ON. I haven't found any settings* that would allow for that. Is it possible? *Possible to set sensitivity to its lowest
Key-binds not retained after PC reboots
I added something to my Fingertip buttons, but after every Windows restart, as soon, as I save in the software, those keybinds are gone, Which kind of comes in tandem with that from time to time, the scroll wheel needs to be turned twice to switch directions(which
Can't add "scroll down" to button
Adding scroll input defaults to Left click. Happens when adding scroll to any button. See video.
More analog binds for deep click.
As far as I can figure, you can only bind a single slider for deep clicks. Would be nice to bind all analog axis to deep clicks.
OLED Screen non-responsive
I've got a problem with my Z at home: OLED screen is showing nothing. I've attempted to program in various things to display, but I'm getting nothing.
Issue with linked applications not activating profile
Heya! Ok. I've come across a problem. To preface: I have subprofiles under Desktop. Currently it's just Browsers and XYplorer under there as the export from the old driver didn't play nice. Also subprofiles under Games. yeah i love subprofiles, heh. When
Windows update wiped configs
Situation: This computer moved from Swiftpoint to X1, I do not believe I had ever saved profile to mouse. Windows update, rebooted and mouse did not work. Thankfully, this is a laptop so I had a trackpad to open X1 and I see that everything inside is
Nested Deep-Click
Something I encountered today: you can not create nested deep clicks anymore
Custom output actions added to profile switch lost when X1 Control Panel closed.
Another thing I encountered is, that if I add an output action to the general settings(like flash current profile) it is removed, when I start up my pc again. Aparrently it is still saved, as the mouse still flashes the profile when switching, but as
Possibly defective buttons
I purchased a Swiftpoint Z on the 29th of December last year. I have yet to use it much at all, when I discovered the bottom edge button feels basically linear compared to the top edge button. The same is also true for the right fingertip button. I have
Logo-lighting
I recently got myself a secondary Z and realized that when you try to make the logo yellow it seems as if the blue level is way too high even though the RGB values are set to 255 255 and 0. I am just curious if you changed something regarding that in
Keep losing profile output actions
I use expert mode to program my profiles, and due to that setting a Logo Color on a profile requires also re-implementing the output OLED -> Flash -> Current Profile. For whatever reason, I keep losing that output on my profiles. Today it happened as
Importing SPCF's into the X1 control panel?
I recently grabbed one of the Arma 3 profiles to experiment with the tilt / lean feature in a game, but thus far I am not exactly sure how to import the SPCF. So far I have tried 4 things to no avail: Opening the spcf with Swiftpoint X1 Control Panel.exe
a bug,Please fix it as soon as possible
For details, please see the video attached. This is a bug my friend encountered. just ignore the sound in the video. The bug appears at the 32nd second. I tried using the same configuration and encountered the same bug.
Scrolling affects settings that use sliders and combo-boxes / Profile exports not locked to spcf file type
Well, since the beta testing is out, here are my 2 cents to the new Software: First of all, I like it, even though its not that different from the old one, when you are in expert mode, but naming stuff, LOVING IT 2 things I encountered: the possibility
Can a mapping be setup to only output if its input is active for a set amount of time?
is it possible to add something like "IF I tilt for 1 sec, execute." I want something I don't accidentally trigger tilt while using my mouse. So I want to do some conditional tilt where I have to hold it for 1 sec to trigger the event, else doesn't trigger.
my Z 's left trigger pull button has Unusual sound
The normal situation is two ticking sounds, but mine has three times, and the third time after the rebound, there is a very subtle sense of passage, but there is a very obvious sound. Although it does not affect the use, but it makes me worry about its
Tracer Macro Support
Just got my tracer and am trying to move over from the z but am missing one key featue. Macros. Will this be supported on the new software like on the swiftpoint driver?
Can't add deep click to right mouse button?
I don't have the option to add a deep click to the right mouse button. I can add it to the left, and left tip, but not right or right tip.
Mouse detected as kinetis bootloader
The mouse is not working. When i go to save file to the mouse it says no mouse connected. I have pugged it in to all the usb ports on my computer. When i go in settings it shows up as kinetis bootloader. It does not even give any imputes and wont let
Swiftpoint Z stuck in bootloader after failed firmware update.
Am running win10 with latest updates. I was in the X1 beta program, using z. Updated the z firmware. updated the X1 control program released a few days ago that program must have a bug. went into a constant loop trying to upgrade the z firmware but only ever getting 2/5ths of the way. my Z is now bricked. No coloured logo, no oled. reset does not work (l+r while inserting usb) reboot does not work Reinstall does not work. using a different computer does not work please provide a solution asap.
Scroll Left / Scroll Right for applications like OneNote (middle mouse button or using global tilt sensor)?
I was a little surprised to discover the Swiftpoint Z doesn't seem to have a left and right tilt button on the mouse wheel like the G700s. Are there any plans with future models to include this functionality? In the interim, is there any good way to make
Ceramic Mouse feet make the swiftpoint Z glide so much better.
Using ceramic mouse feet with the swift Z makes it glide better than new. the pads wore out so i removed then and i installed lexip Mo42's onto the same places (filed down the plastic to make them fit smoothly) and it makes the moderately heavy weight
Firmware Update "Please ensure that you have closed SwiftpointDriver." message
I seem to be going in circles trying to update the firmware on my new "Z" mouse. Either the upgrade app closes without doing anything or the mouse locks up and I get a failed update message. What exactly is the "SwiftpointDriver"? A dialog tells me to
Should I remove the old Swiftpoint Driver?
Just took the jump to X1, but it didn't utomagically uninstall the old driver. It's just to uninstal it right?
Unable to switch profiles in config mode
I have a Swiftpoint Z and just upgraded to using the X1 software. Everything seems to be working as expected except I can no longer switch profiles when in the tilt 25 degrees config mode. Other config mode buttons work such as changing DPI or OLED. I
Auto profile switching out of sync
I constantly stumble in to issue with profile auto switch not doing it's job, I have gone thru numerous hardware/software combos and it appears that every manufacturer has this issue, like that's some kind of global system limitation or whatever. Maybe
Mouse stop working if Swiftpoint not running?
I discovered that the mouse completely stops working if you close the Swiftpoint X1 software (completely quit the app from the system tray). I know probably everyone has it running all the time, but there is some time you have to close or restart the
Action stopped by auto switching profiles
Hello, not sure if this is intended or if it's a bug ^^ I have a swiftpoint Z, awesome mouse by the way !! I got an action on my left trigger (as a global action not overwritten by others profiles) : a simple alt+tab and waiting for mouse mouvement to
Option to add "Layers" onto profiles + multi-button action sets.
As somebody that own, love and use both the Swiftpoint Z and the Steam Controller, it is hard not to compare the profile software related to the individual products. One thing that I have been wondering, was whether it is possible/viable/plausible to
How do you activate a deep click action without also activating its normal click?
i made a post on reddit but i think the sub there is dead. basically im controlling actionbars in game and if i have two keys bound to a deep click for instance, left fingertip is normal click: 1 deep click: f1 now i have both bound to press but if i
Auto Game Detection - Refinements
As a first cut the feature is working well in the beta. It really is a nice quality of life feature but has so much potential for future improvements. First and most obvious is "More Games". Data entry is a massive job, specially with the amount of games and applications out there. The best option in my mind is to create UI to allow users to populate all the controls for a game. These then get pushed up and made available to everyone else using API's. If not done this way, the library of games you
macOS Big Sur - White icons in menu bar
Minor refinement. With Big Sur out, the icons in the menu bar are all white. Can we please get an update with a minimalist icon that fits the OS design?
Firmware update time out
2 just Local\Swiftpoint X1 Control Panel dont Local\SwiftpointDriver in china
Upgraded Scroll Wheel
Out of curiosity: since there were so many complaints about the scroll wheel, did you guys rework it in later revisions?
Firmware update failure (could not unlock)
I downloaded the new software, and started the firmware update for my Z as prompted, but my mouse does not turn back on during this update, I have to remove the USB and insert it again, which cancels the update. I made sure the old software was entirely
the Tracer does not have "tilt"?
How do you set the tilt mode in Tracer?
[War Thunder] Game recognises mouse but does not recognise joystick inputs
Game is War Thunder. Mouse is recognised as a potential joystick but when configing controls, the joystick inputs are not recognised Mouse is displaying angles in oled display. Is there a way to determine if pc is recognising joystick inputs.
Next Page