Cursor dissappears after Y axis drift?
Hi everyone, I'm currently using my original an much love SwiftPoint Z mouse playing Guildwars 2. I'm currently using the 3.0.7.20 driver and firmware 205 on Linux Mint 22.1. I've recently noted that my mouse cursor will disappear from the screen while
Mouse tracking consistent lag/slowness with ProPoint Mouse
I and my 20 other friends had each bought several Swiftpoint ProPoint mouses recently and we are all using Windows 24H2 Professional Edition Build 26100.3476 on various make/model laptops and using Windows P3 Control Panel v3.6.4.0 which is basically
My mouse has a lot of give before the button actually gets pressed on the left button.
I created a topic before but I'm not sure if anyone saw it as I think it got deleted. But whenever I click the left click on my Swiftpoint Z2, It has way too much of a gap before the actual button is pressed and It sometimes double clicks if I tap the
Fulscreen of Youtube videos canceled when i tilt the mouse
Hi! I have a little problem with the Z2 (batch 3). When i'm in fullscreen on a youtube video, if i tilt left (or up, it's difficult to say) the mouse, it got out of fullscreen. I tried to remove all the tilt functions attributed to every profiles i got
Anti cheat is detecting swiftpoint software as invasive. Does the program detection run constantly?
Hello, I play games with strict anti-cheat like playerunknown's battlegrounds on PC; and one of the programs in question is the swiftpoint Z X1 control software itself, as I'm checking there is no way to turn off the polling for running programs, unless
swiftpoint z buttons not responding
my middle mouse buton and button 4 and 5 are not registering on windows 11 i have reset the mouse and uninstalled, reinstalled software
Mouse only works with Driver not X1
After having the device freeze during a Firmware update, I followed several forum topics to eventually reverting and recovering it to the old Swiftpoint Driver 1.2.56. Then deleting this and going back to X1 software the device again is unable to connect
Z2 - Does the sensor sleep if idle?
Running into a consistent quirk: after my Z2 is idle for a few minutes, it seems like the sensor goes into some sort of sleep mode. When I move the mouse after leaving it sit for a while, there's about a 1 second delay before the sensor tracks mouse movements
Z1 - wheel scrolling *way* too fast
I've had the Z1 since the kickstarter and now have multiple Z1 and a Z2. Am currently at a client site with my laptop and a Z1 and the mouse wheel has started scrolling way too fast... a single movement of the scroll wheel will zoom the browser page right
How do I stop the auto-click behavior in the Mac version?
I am using the Mac version and when I install the swiftpoint driver, it automatically clicks on the top of the open window in most applications. In the Finder.app, it will select the first file or folder on its own. I would like to stop this behavior.
Windows P3 Control Panel - Label issue
I am running Windows 11 and there is a issue with Windows P3 Control Panel v3.6.3.0 which is not in the earlier versions. Basically, every once in awhile, the label which is defined as the same thing one gets when the mouse pointer is placed on top of
Tilt calibration no longer fixes the tilt angles
Recently I’ve been using a significantly skewed desk (the bolts weren’t as tight as I thought they were). After leveling it, I tried to calibrate my Z1, but the progress bar got stuck. I moved the mouse by mistake, and decided I might as well shut down
誤作動
マウスを使用している時、OUTLOOKでキーボード入力中に勝手にEnterされてしまう。 その他のアプリでは誤作動無し。
Propoint not working with mac Ventura
I have a Macbook Pro with Ventura OS up to date. My propoint will connect via bluetooth but then stop working after several seconds. I've reset the Propoint. I've tried both bluetooth and USB connections, both unsuccesful. I've been able to use it with
When I make a change in Swiftpoint software, my Z mouse freezes for upwards of thirty seconds
Hi. When I make a change in the Swiftpoint software, like change a mouse button bind, my Swiftpoint Z mouse will completely freeze for upwards of thirty seconds. No buttons work, tilting into config mode doesn't work and the mouse pointer freezes. This
P3 Control Panel crashes after it launches
Hello, I installed the P3 Control Panel but it crashes every time after launching. What I already tried is as follows: installed the latest version SwiftpointP3-V3.6.0.0.msi on my windows 10 ↓ crashed ↓ followed the instruction "Windows P3 Control Panel
X1 not auto switching properly with tracer
I recently purchased a tracer and a second z and upgraded to the x1 software and have had nothing but issues with profile auto switching. X1 is ran as admin and when I enter a game I usually have to tab out and back in 1-3 times for it to kick on as well
Key-binds not retained after PC reboots
I added something to my Fingertip buttons, but after every Windows restart, as soon, as I save in the software, those keybinds are gone, Which kind of comes in tandem with that from time to time, the scroll wheel needs to be turned twice to switch directions(which
Keep losing profile output actions
I use expert mode to program my profiles, and due to that setting a Logo Color on a profile requires also re-implementing the output OLED -> Flash -> Current Profile. For whatever reason, I keep losing that output on my profiles. Today it happened as
Auto profile switching out of sync
I constantly stumble in to issue with profile auto switch not doing it's job, I have gone thru numerous hardware/software combos and it appears that every manufacturer has this issue, like that's some kind of global system limitation or whatever. Maybe
Firmware update time out
2 just Local\Swiftpoint X1 Control Panel dont Local\SwiftpointDriver in china