• Double Click/Roll?

    I REALLY want to be able to use the roll feature in things like Unity for switching before input types, but the mouse is easy enough to roll when moving I want to be able to double-roll to activate to make sure it's an intentional act. I don't see anything
  • Dota 2

    Hello, Has anyone configured this mouse for Dota 2? I can't seem to make it work. Whenever I assign a function to the control panel, it does another action game. For instance, Instead of using an ability, it controls the camera. Thanks.
  • Mouse skates for ProPoint

    Anyone have any good suggestions for mouse skates for the ProPoint? I find mine keeps scratching on most surfaces and does not feel smooth at all. Mouse and surfaces used have both been cleaned with rubbing alcohol and any debris removed.
  • Double alternate

    So it seems that having two alternates on the same keybind doesn't seem to work. I tried binding an alternate with 2 alternate value with the proceeding commands as lb1 down and lb2 up. Then after that adding the same thing but with the down and up switched.
  • Strain gauge replacement

    Hello, Would it be possible to replace the strain gauge in the mouse? Is it some standard sensor that could be bought off-the-shelf?
  • How to set drive parameters separately for two Z mouses?

    I have two Zs. How do I set the force threshold separately. As you know, each Z force sensor is different and needs to be set separately. At present, only one mouse is displayed in my driver, and I cannot set the force threshold of the two separately.
  • q and e for fps

    im trying to ad q and e to side to side mouse movement  i can only get right side to work  can someone post some mappings for this im doing something wrong  
  • Can I keep loops running after switching profiles?

    Having buttons held down is good, but to have this effect for scrolling I need to use a loop. I put these kinds of commands in a sub-profile, leaving my main one for quick single actions and default mouse buttons. I then hold down an unused button to
  • Difference between Creator and Z?

    To me, the new Creator looks like the Z, but white (yay dirt marks) and missing some of the "fancy" features like takeoff, LED cube, and OLED screen. Is that it or am I missing something that makes this unique?
  • I don't know if Creator and Z's software can be used universally

    I don't know if Creator and Z's software can be used universally
  • Driving/Tilting

    So, I have had the mouse since the release, and I have never learned how to use it with the thing that goes on the bottom so you can drive. I don't know if I need to set it up in the software or something, but could someone help me? I also wanted to know
  • Production problems

    I came across a Twitter post from you guys from October where you mentioned that due to the pandemic you couldn't manufacture the Z anymore. Since I don't plan on giving up having a Z ever again I was wondering whether this was still the case and I am
  • Is the Swiftpoint Z ever coming back?

    The Swiftpoint Z seems to be discontinued. Is there a chance it might come back into production? I recently purchased a Swiftpoint Tracer and I'm very happily impressed. After doing a little digging, I learned there was a previous version that had more
  • Create mouse features?

    hi, there wasn't a Create mouse category but... I feel its a bit unclear what features the new create mouse has.  it says 2 presure sensor buttons, but what buttons are those? the main or the fingertip buttons? second i am a bit curiouse if the create
  • Wrist strain

    I was happy to get my Swift Z mouse today. After 30 minutes of using I felt wrist strains and it's still on going. I didn't have that with my regular mouse and the strains go away when I switch to my regular mouse. What am I doing wrong or is it possible
  • Default Folder to Export Mappings

    Every time I export my mappings file, Swiftpoint X1 sends me to "...\Documents\Swiftpoint X1 Settings" by default. It gets a bit tedious to go to my preferred folder every time. Is there a way to change the default folder save location? Maybe there's
  • Lost Ark profile?

    Hi all! Does anyone have a swiftpoint Z/tracer profile for Lost Ark? For those who dont know the game, Lost Ark  is a new action MMORPG (kind of a mix of diablo and wow in some ways, with korean rpg elements as well) released recently worldwide by Amazon
  • Uploaded Profiles

    Hi, I recall there previously being shared profiles for specific games on the forum you could download but I can no longer them? Looking for profiles for World of Warcraft or Lost Ark if anyone has any. There was definitely some profile for binding your
  • How to clean Swiftpoint Z

    So I was wonder how anyone else that has a Z cleans their mouse with all of the really small groves and it being a somewhat sensitive mouse. Thanks!
  • Optic Sensor

    On My Other Mice, The Sensor Glows Red. On The Swiftpoint Z There Is No Light. Is This Normal? I've Noticed That Its Become Borderline Unusable For Gaming. I've Messed With The DPI To No Avail.
  • Different Switches for M1 and M2 click

    I saw in a different thread about the Omron switches that are similar to the ones that come default from Swiftpoint for replacement, but I was wondering if anyone has any experience using something from Kailh (like the 4.0 or 8.0) or similar? Is this
  • Swiftpoint Z: Tap and then release click. Also reduce holddown click time

    As simple as: When press: Click. When released: Nothing. Then: End. Solved: The expert mode UI not quite intuitive, but realized there was a setting menu for both press and release. _ Second question: Can I reduce the amount of time the tap is being holded?
  • Cannot connect my Trackpoint to my computer

    Hi there! I am having problems connnecting my trackpoint to my computer. Must admit I haven't used it in awhile. Please advice.
  • How to use analog controls in Battlefield?

    Hi, so I want to use the Z mouse normally when on foot in Battlefield (right now, the 2042 beta), but the tilt controls when piloting a heli or jet. I've enabled "joystick" as game controller type and mapped analog left/right and forward/back in the X1
  • disabling auto update

    I would like to find out if there is a way to stop the auto updates. I will manage checking and updating software. I would prefer not to have to resort to firewalling the software in, but will if its the only way.
  • Where can I find the 16 pre made profiles for gaming?

    The page for the Swiftpoint Z says: "The Swiftpoint Z supports all software and games, and comes with 16 pre-made profiles for some of the leading titles in gaming." Where can I find these profiles? Pre-made profiles include: Apex Legends, Borderlands
  • Joystick function does not work

    Hello everybody, I have had my Swiftpoint Z since yesterday and therefore I am not very familiar with the software. As it says above, my problem is that the mouse is recognized as a joystick, but no joystick inputs are recognized. Inputs are also not
  • Hidden text in nested buttons.

    Greetings,   Is it possible to recover a text that is assigned to either a mouse button or movement that is nested deep in about six or so button combinations without having access to the .spcf file?
  • Possibly defective buttons

    I purchased a Swiftpoint Z on the 29th of December last year. I have yet to use it much at all, when I discovered the bottom edge button feels basically linear compared to the top edge button. The same is also true for the right fingertip button. I have
  • Logo-lighting

    I recently got myself a secondary Z and realized that when you try to make the logo yellow it seems as if the blue level is way too high even though the RGB values are set to 255 255 and 0. I am just curious if you changed something regarding that in
  • Announcements

  • X1 Control Panel Experimental Linux Version

    Disclaimer: Linux is not an officially supported platform. This release is purely experimental, so comes with no guarantee that it will work on your system, or that it will receive further updates. A list of known issues is included further below. But
  • Swiftpoint X1 Control Panel Beta Testing

    If you'd like to be involved in testing beta versions of the software for our Professional Range mice check the thread linked below for more details (Community account required)
  • Providing Feedback and Reporting Issues

    Providing Feedback If you have any feedback or suggestions feel free to post them in our community forum as an Idea topic, or submit a ticket. First though please do a quick search in-case someone else has already started a relevant topic you could add to instead. If they have, make sure to use the voting system so we know which ideas are most popular. You will find the Vote button at the top of any Idea topic. Reporting Issues If you encounter any issues with the X1 Control Panel please post details
  • Sticky Posts

  • X1 Control Panel Experimental Linux Version

    Disclaimer: Linux is not an officially supported platform. This release is purely experimental, so comes with no guarantee that it will work on your system, or that it will receive further updates. A list of known issues is included further below. But
  • Providing Feedback and Reporting Issues

    Providing Feedback If you have any feedback or suggestions feel free to post them in our community forum as an Idea topic, or submit a ticket. First though please do a quick search in-case someone else has already started a relevant topic you could add to instead. If they have, make sure to use the voting system so we know which ideas are most popular. You will find the Vote button at the top of any Idea topic. Reporting Issues If you encounter any issues with the X1 Control Panel please post details
  • Most Discussed Topics

  • How to scroll faster?

    Hi, I would like to make my Swiftpoint Z2 scroll faster (maybe 3x or 5x speed) when I tilt the mouse sideways. I tried to set this up as in the screenshot, setting even 50 units, but I noticed no difference at all. What am I missing? I'm on macOS.
  • Cursor dissappears after Y axis drift?

    Hi everyone, I'm currently using my original an much love SwiftPoint Z mouse playing Guildwars 2. I'm currently using the 3.0.7.20 driver and firmware 205 on Linux Mint 22.1. I've recently noted that my mouse cursor will disappear from the screen while
  • Tap and hold for two different actions

    Hello guys ! I have trouble just making a tap or hold on the same key :( i don't know if it's possible For exemple in PUBG i'd like to use the left trigger push for "use" (when i just tap it quickly) and when i hold it it's ALT for "free look" Same for
  • Fixed mouse movement (Human Error)

    After checking my for obstructions or dust I went through all kinds of troubleshooting to find there was I tiny piece of packing material exactly the length of the optical slit for the laser reader that would shift around, some times blocking the sensor.