Transfer of ergopoint control
My assistant and I both have Ergoppoints, which we find awesome. A couple of times now though we've found that my mouse is working on / controlling her device and hers is doing the same on mine even though our respective mice are about 2 meters away from
Unable to setup a Keyboard action before click in one macro
Hello everyone, I am working in AutoCAD and have about 800 arcs I need to draw. the sequence is Keyboard A (Arc tool) Keyboard Enter (Activates the arc tool Mouse Left click (Start point of the arc) Keyboard E (Option for next click to be the end of the
X1 Control Panel: Transferring custom Windows profiles to Linux
Hey! First time posting here. I'm currently in the process of switching from Windows to Linux. I'm still dualbooting over separate SSD's until I can set everything up correctly, which brings me to why I'm asking this. Recently, I found out about the X1
Help me make gyroscope work ?
So, I bought the mouse Z2, and I wanna play Batman Arkham knight with it, specifically driving the batmobile using the gyroscopes. I customized the left lean to be the "A" , right lean to be the "S", front lean to be "W " , back lean to be "S", But still
Raise lift Off Height beyond max?
Is there a way to raise the max lift of a bit more? I already set the lift of height: max in expert settings. On my old Z i was using ceramic mouse feet, but if i use them on my new Z2 the sensor stops working, since the mouse is a bit to far away from
Rumble effect on my Swiftpoint Z.
I just started using the rumble feedback on my Z especially on the knuckle buttons. I noticed it goes to 100 on yellow and then up to 120 on red. Is there any side effects to using the full 120? I love using the strong rumble on the when playing my games
Where to upload profiles?
I would simply like to ask if anyone could help me find where to upload profiles cause I have been to the swiftpoint community files site and seemingly I cannot make an account to sign in and upload it there. Does it have something to do with the forum
Finger Tip Buttons pulling out very easy
Ok. so I admit that the first night I had my Creator I knocked it off my desk and it fell on the floor and the left fingertip button fell out. I put it back and have had no problems other that it seems to lift out very easy. but i figured it was my fault
Is there a way you can get a button to hold down on click?
I want deep click to actively hold down the mouse button so that I don't have to manually do so. Is there a function to enable this?
Vibration while holding down key, not intial keypress?
As title asks, is there? Just got my mouse and looking through the settings right now will update thread if I do find out how.
Deep Click
I was wondering if there is a way to use a deep click the bypasses the primary click. from everything I have read and played around with it seem this will not be possible. but thought I would ask. for example if i set primary click to "Delete" and deep
Auto Switching Profiles
Hi Has anybody managed to get the profile to switch when playing an Epic game? I have a profile setup for The Outer Worlds, I have linked the game .exe but the profile does not switch. I tried linking the EpicGameLauncher and the UnrealEngineLauncher
Z2 can't left click after setting Deep Click
I tried setting the pressure thing and now it doesn’t left click and I got it to do the reset but it didn’t work. Mouse is unfortunately useless now. How do I fix it?
Pen grip on non-smooth laptop surface
Is there a recommended way to use a ProPoint on the empty space on a laptop (i.e. to the right of the touchpad) when this area isn't smooth (it's hard to move the mouse across this surface)? I've had a number of pen grip mice, and the old ones came with
Are Z2, Creator, Tracker Profiles interchangeable?
I might have messed up. Loved the Creator I Bought 2 weeks ago so when I saw the opportunity to buy a Z2 I couldn't pass it up (one for work, one for home) so I saved my profile data to the Creator and to a file on my computer and unplugged my creator
Running a macro within a TILT range.
For example: Tilt Right 1.2 between 2.4 degrees > OLED Scroll Wheel Push > VOLUME UP Scroll Wheel Pull > VOLUME DOWN Tilt Right 1.2 between 2.4 degrees Return > Previous OLED So slightly tilting the mouse the volume can be adjusted but this
Tilt Activating immediately despite angle setting
On my Z2, trying to map right tilt to a single keypress and it activates with very little tilt no matter what I set the angle to. What setting am I missing? Thanks.
New 3.0.5.0 settings "Show output list in second column" and "Show Press & Release output lists" not working?
Just checking to see if the new changes: Added option to display output action list side by side with their mapping. Added option to display an inputs Press and Release output lists simultaneously. This also allows outputs to be dragged between the press/release
X1 Control Panel via Remote Desktop?
Is anyone an expert in with Windows Remote Desktop remote desktop Settings and the use of and advanced mouse application? The Creator and X1 Control Panel installed on my home computer (lenovo thinkpad Win10) and remote desktop connected to work computer
How using Tilt/Roll in War Thunder ???
The question is simple.. but i don't know what to map on X1 Control Panel to be able to use Tilt/Roll with Helicopter in War Thunder. Is someone can help me... (i'm using Linux) but Z2 working Well here... Second question : how to map "Deep Click" without
CTRL + left click with Creator
There is reference to CTRL+Left Click in the FAQ for the Z starter mappings but I havnt been about to figure out how to do this with the creator
How to create Macros with Creator?
Breaking out in a cold sweat wondering if I just spent the last 3 hours learning and falling in love with something that isnt going to work. I have come across a few references to Macros. I know the Z has it (they are just impossible to get) and 3 years
Mouse Movement Mouse Pointer.
I am just testing and experimenting with the features on my Z . I saw one of the features as pictured. I can't seem to find it or enable it - I wanted to see what I could do with it. All I see is Mouse Movement - which assigns an action. I am using expert
Does X1 support "pan" gestures?
I've been using a Logitech mouse for years and I'm excited to switch to a Swiftpoint Z. One of the features I use on the logitech mouse all the time is the ability to "pan" throughout a window (Logi calls it "pan" under their gestures macros). It essentially
Thumb buttons
Can I program the thumb buttons for ESC and PTT
Deep click question
I setup left click deep click to change weapons in Fortnite however if I press the left click too quickly it changes from shortgun to smg without shooting the shotgun. Is there a way to make sure shogun shoots before switching to the smg? 2 is my shotgun
Swiftpoint Z2
I've change banks since I pledged under the 2/23/2023 kickstarter offering for my Z2. When was the money going to be withdrawn and when are you expecting to ship the first batch of Z2's?
"Tapping" and "Pressing" the same button to configure two different functions
An example of what I want to do: Tap Top Thumb Button: Forward Press Top Thumb Button (Hold Down) + Tap Left Button: Search (Ctrl + F). Tapping works fine. When I Press Down, the Search function executes, and when the Top Thumb Button is released, then
Trigger buttons hold down?
Can I use the trigger buttons for voice comms (PTT in BF2042) while holding the button down? I can only get it to stay on for a second or 2, am I doing something wrong?
Macro stop help.
Hello there, I need help with a loop. Just for an example, I set this spam button up. Hit the button, it infinitely clicks left click, good for spam clicker games and such. But I'm wondering how to set it up to stop repeating the action. I would like
Reset all settings to default in P3 Control Panel
Is it possible to reset all settings including scrolling clicks, mouse speed, etc back to the defaults without having to uninstall and reinstall the P3 Control Panel?
Is there a way to lock the Mouse Cursor on the Screen for a moment?
I would like to be able to lock the Mouse Cursor on the Screen for a moment (100ms or something). I use a very peculiar set of Hotkeys, where I Click once with the Mouse, and I either trigger a Double-Click-Down or a Triple-Click-Down. The "Click-Down"
Is it possible to Search for Button Mappings in Swiftpoint X1 control panel?
Say I want to list out all my Button Mappings that Trigger Logo Backlight Mode to: Hue Rotation. I figured I'd try opening the Swiftpoint Configuration File to see if I couldn't find anything recognizable. I Searched for "logo" and "light" but nothing
Request spare parts
HI, Accidentally some water fell on the Z1 mouse. Only after a few days I realized that the OLED display is unresponsive, it is completely black. I tried to reset the mouse as suggested in another Ticket, but it doesn't recover. Is it possible to request
Where is the settings of Z axis?
Hi, I can no longer find the setting to modify the programming of the command associated with lifting the mouse from the desk (Z axis)... Can anyone tell me where I can find it? Thank you. I use "Swiftpoint X1 Control Panel 2.0.11.0"
Swiftpoint Z restock?
Hi, i missed the last Swiftpoint Z sale and have been really happy with the one i have. I have been thinking of getting one more for Uni, since the gyro features and fingertip pressure sensitivity speeds up the workflow in CAD programs immensely and i
Troubles performing consistent heavy attacks in Witcher 3
In your youtube vid https://youtu.be/64d0C4mAKAw?t=227, you mentioned that you can perform heavy attacks by pushing the mouse button harder. Well I tried that by assigning a push force of 10% to the left mouse button and of course assign a heavy attack
Arma 3: Ctrl modifier is not applying correctly to keys between its press and release
Hi, I'm trying to setup the Rear Edge mouse button to issue a Ctrl-g for Arma3. Ctrl-g in Arma3 is used to cycle through your available grenades. Pressing g in the game will throw the grenade. In testing, when I press the Rear Edge mouse button, it's
Mouse Wheel, Switching between Sub-Profiles and Parent Profiles, and Logo Color
I use my Thumb Buttons as modifiers. I configured my Bottom Thumb Button + Wheel to quickly switch between Tabs (or documents) associating Ctrl + Tab & Ctrl + Shift + Tab to the Bottom Thumb + Wheel Pull & Bottom Thumb + Wheel Push, respectively. I also
Strain gauge replacement
Hello, Would it be possible to replace the strain gauge in the mouse? Is it some standard sensor that could be bought off-the-shelf?
Next Page