X1 Control Panel Experimental Linux Version
Disclaimer: Linux is not an officially supported platform. This release is purely experimental, so comes with no guarantee that it will work on your system, or that it will receive further updates. A list of known issues is included further below. But
Is USB 3.0 required for the Z?
Traveling on short notice I just toss my Z2 in my back back and got going. then didnt even open my laptop for 2 days and when I did it wanted a windows up which I did, and now my Z2 wont connect. but i think at home it was plugged into the dock USB3.0,
Mouse only works with Driver not X1
After having the device freeze during a Firmware update, I followed several forum topics to eventually reverting and recovering it to the old Swiftpoint Driver 1.2.56. Then deleting this and going back to X1 software the device again is unable to connect
Macro Setup Mouse Movement
I'm trying to add a macro for one of my games whilst using complex mode and I added the movement macro with the coordinates of the screen where I would like my cursor to go. However, it doesn't set the cursor position to the coordinates but instead adds
Pivot without parent Settings for Z2?
Tried adding the pivot with out parent code to on of my profiles and cant see to get it to work. when i try to reimport the file it has no name and can not be select. has anyone else tried this with the z2 thanks
Z2 - Does the sensor sleep if idle?
Running into a consistent quirk: after my Z2 is idle for a few minutes, it seems like the sensor goes into some sort of sleep mode. When I move the mouse after leaving it sit for a while, there's about a 1 second delay before the sensor tracks mouse movements
Implicit delay between inputs
I made a macro that spams the left mouse button as fast as possible, and I compared it to the same macro I had on my old mouse (Logitech Gaming Software). These are the results: - Swiftpoint X1: 167 clicks per second - Logitech Gaming Software: 999 clicks
Auto backup on "major changes" to a profile
so, real short and sweet... I just unwittingly deleted my heavily customised primary "desktop" profile. >.< "Expert Mode" FTW. looking through my "Documents" location (Windows user, if that matters), I see the "Swiftpoint X1 Settings" folder already has
Z1 - wheel scrolling *way* too fast
I've had the Z1 since the kickstarter and now have multiple Z1 and a Z2. Am currently at a client site with my laptop and a Z1 and the mouse wheel has started scrolling way too fast... a single movement of the scroll wheel will zoom the browser page right
Finger Tip Button cap/replacement!
Recently I discovered this thing called YouTube (yes really) so now daily if can see how stupid i am. anyway just watched a video that shows the finger tip butt caps can also be used to replace the standard fingertip buttons. and if you have bigger hands
Unable to setup a Keyboard action before click in one macro
Hello everyone, I am working in AutoCAD and have about 800 arcs I need to draw. the sequence is Keyboard A (Arc tool) Keyboard Enter (Activates the arc tool Mouse Left click (Start point of the arc) Keyboard E (Option for next click to be the end of the
Mouse 1 and Mouse 2 height mod (increased ease of use)
The mouse's learning curve and ease of use was greatly reduced when I added adhesive rubber bumper stops for cupboards. I cut one of these things in half and stuck them on top of Mouse buttons 1 and 2 and now all of my mouse buttons have the same height,
Swiftpoint Z 1st Gen random "Exit Config" and buzzing after recent firmware upgrade
Hi there! I have probably 4 Swiftpoint Z (1st gen) mice that I use daily as a radiologist for reading exams. They've been rock solid aside from the middle click issue which is a known thing. However, since I upgraded to the most recent firmware (have
How do I stop the auto-click behavior in the Mac version?
I am using the Mac version and when I install the swiftpoint driver, it automatically clicks on the top of the open window in most applications. In the Finder.app, it will select the first file or folder on its own. I would like to stop this behavior.
Coding profiles
Are there any profiles pre built for jetbrains rider or webstorm?
Swiftpoint Z2 is cycling between connected and disconnect
recently received my z2 and when I plugged it in the x1 control panel wanted me to update the firmware and when I did it "finished" updating the firmware and then the mouse wouldn't move and started disconnecting and reconnecting. Ive tried plugging it
X1 Control Panel: Transferring custom Windows profiles to Linux
Hey! First time posting here. I'm currently in the process of switching from Windows to Linux. I'm still dualbooting over separate SSD's until I can set everything up correctly, which brings me to why I'm asking this. Recently, I found out about the X1
Help me make gyroscope work ?
So, I bought the mouse Z2, and I wanna play Batman Arkham knight with it, specifically driving the batmobile using the gyroscopes. I customized the left lean to be the "A" , right lean to be the "S", front lean to be "W " , back lean to be "S", But still
Undo function in X1 Control Panel
Possibly this exists and I can't find it, but I would really appreciate an undo function in the control panel. i spent time making a mildly elaborate key mapping and then misclicked and overwrote it. And when I tried exiting without saving it saved anyway,
Raise lift Off Height beyond max?
Is there a way to raise the max lift of a bit more? I already set the lift of height: max in expert settings. On my old Z i was using ceramic mouse feet, but if i use them on my new Z2 the sensor stops working, since the mouse is a bit to far away from
Rumble effect on my Swiftpoint Z.
I just started using the rumble feedback on my Z especially on the knuckle buttons. I noticed it goes to 100 on yellow and then up to 120 on red. Is there any side effects to using the full 120? I love using the strong rumble on the when playing my games
Where to upload profiles?
I would simply like to ask if anyone could help me find where to upload profiles cause I have been to the swiftpoint community files site and seemingly I cannot make an account to sign in and upload it there. Does it have something to do with the forum
Auto Profile Switching not recognizing Sketchup Pro
I cant get the Auto Swittching to recognize Sketchup Pro 2021 (this is the desktop software installed on my computer with .exe file not the web version) I think it was at some point, but I am not 100% sure that is true. curious if anyone else has issue
Swiftpoint Z tilt back activating randomly
I have an issue where the Swiftpoint Z will think it's tilted back all the way randomly. I have the mouse programmed to flash a custom message on the OLED screen, and change the scroll wheel to shift through songs when tilted backwards 17 degrees, and
Config Mode?
I have seen several references to a Config mode, someone said the mouse wouldn't switch profiles when in Config mode. But I cant find anything explaining what config mode is or what it is for. I think I understand that it is activated when tilt hits 25
Finger Tip Buttons pulling out very easy
Ok. so I admit that the first night I had my Creator I knocked it off my desk and it fell on the floor and the left fingertip button fell out. I put it back and have had no problems other that it seems to lift out very easy. but i figured it was my fault
How do I make Z2 profiles available from memory? (for use on a different PC or Mac)
Hi I received my Z2. After playing around for a few hours, I could not get the profiles to work from memory. When I switch to memory, it defaults to Desktop 1200 DPI. I have set a custom profile, renamed it, and saved it in memory more than ten times
X1 via Package Managers (WinGet/Chocolatey/Homebrew)
Is the X1 Control Panel available through any command line package managers? I am using my Z2 on both Windows and macOS systems, which I manage software installations through package managers, so having X1 available through any of these would be great:
Allow mapping of analog deep clicks to joystick axes
I'm attempting the first step in getting Azeron + Z to play nice with FPS games where you also drive. The unfortunate problem is that most games of this type use thumbpad for movement + trigger to shoot when walking, but then use only left-right on thumbpad
Tilt for Scroll
Apologies up front I just received my Z2 and have many questions but will be keeping them individually posted. I was looking forward to being able to use the tilt left and right feature of the z2 to scroll left and right and I can do this but i have tilt
Is there a way you can get a button to hold down on click?
I want deep click to actively hold down the mouse button so that I don't have to manually do so. Is there a function to enable this?
Vibration while holding down key, not intial keypress?
As title asks, is there? Just got my mouse and looking through the settings right now will update thread if I do find out how.
Third collumn for advanced mode
Right now advanced mode has PLENTY of real estate even in a 1920x1080 monitor. To save some navigatonal clicks while using the software, I suggest giving it a third column for the active "[BUTTON] Press" / "[BUTTON] Release" page. I thought about explaining
Deep Click
I was wondering if there is a way to use a deep click the bypasses the primary click. from everything I have read and played around with it seem this will not be possible. but thought I would ask. for example if i set primary click to "Delete" and deep
Organizing Profile Order
Hi, Is there a way to organize the order of profiles? Like, if I wanted to move my Source 2 Hammer profile to the top, how do I do that? I use mouse buttons to switch between profiles, and I would like to organize where each profile falls in the list
HELLDIVERS 2 Profile
Feel free to use this proven Helldivers 2 profile for Z or Z2 mouse. All buttons are labelled, so you know what button does what by looking at the OLED screen. Features: x2 SHIFT buttons x2 DEEPCLICK buttons SHIFT buttons: While holding down "Right Fingertip"
Auto Switching Profiles
Hi Has anybody managed to get the profile to switch when playing an Epic game? I have a profile setup for The Outer Worlds, I have linked the game .exe but the profile does not switch. I tried linking the EpicGameLauncher and the UnrealEngineLauncher
Z2 can't left click after setting Deep Click
I tried setting the pressure thing and now it doesn’t left click and I got it to do the reset but it didn’t work. Mouse is unfortunately useless now. How do I fix it?
Gameplay Haptic Feedback Idea
Hi! Is it possible to get haptic feedback vibrations from gameplay? For example when playing Fortnite on controller if I get shot I will feel the haptic feedback. Of course this could wear down the haptic motor. I’d run it on lower s settings
A very simple solution to the movement resistance issues (probably should be in the instructions).
I didn't see any instructions for it, but you have to remove the thin plastic films on all of the surfaces on the bottom of your mouse that come in contact with your mousepad. It's not obvious just by looking at it, as there aren't any tabs to facilitate
Next Page