[Linux] Auto Long Press Click not working
Hi ! I'm trying to configure an Auto-Click on a button on my Z2 and I can't get it to work... I can't configure it. (short auto-click works) Here is my 'script' for my long auto click. Long Auto Click Where is the problem please?
Translations
I just realized that if you wanted to add more translations to the control panel, you could technically make the translation files open source and let the community help with that. I for example could and would like to add a translation for german (maybe
Are Z2, Creator, Tracker Profiles interchangeable?
I might have messed up. Loved the Creator I Bought 2 weeks ago so when I saw the opportunity to buy a Z2 I couldn't pass it up (one for work, one for home) so I saved my profile data to the Creator and to a file on my computer and unplugged my creator
Z2 Fingertip buttons are too large
I had a Z1 and they were small rubber affairs, much more discreet. The Z2 fingertip buttons are I'm sure trying to be helpful but I keep fouling them all the time and the paddles extend quite far forward. My wife has smaller fingers and was experiencing
Z2, Only Edge buttons working
Just got my Z2 a few days ago; I love this mouse and everything has worked fine until now. Stepped away from my computer for a few hours but when I got back none of the buttons on the mouse worked with the exception of the profile switcher and screenshot-bound
Running a macro within a TILT range.
For example: Tilt Right 1.2 between 2.4 degrees > OLED Scroll Wheel Push > VOLUME UP Scroll Wheel Pull > VOLUME DOWN Tilt Right 1.2 between 2.4 degrees Return > Previous OLED So slightly tilting the mouse the volume can be adjusted but this
Cursor jump across different monitors
Hey there! I received my Z2 and it's been amazing so far :) I have a suggestion for us multi monitor users, I was wondering whether it would be possible to add an option to move the cursor to the different monitors that you have, maybe similar to how
Tilt Activating immediately despite angle setting
On my Z2, trying to map right tilt to a single keypress and it activates with very little tilt no matter what I set the angle to. What setting am I missing? Thanks.
Z2 not detected when returning from sleep
New Win 11 install. Changed Z1 for Z2 when it arrived. All seemed to be working just fine but mouse is not detected by X1 software after resuming windows from sleep. Cursor is still working but buttons do not register and logo light is off. Disconnecting
New 3.0.5.0 settings "Show output list in second column" and "Show Press & Release output lists" not working?
Just checking to see if the new changes: Added option to display output action list side by side with their mapping. Added option to display an inputs Press and Release output lists simultaneously. This also allows outputs to be dragged between the press/release
Controller input not detected
I struggle to get controller input detected by external software or games. Windows joycpl also doesn't seem to detect any buttons or sticks, not sure if it ever did or should tho.
Option for Mouse Actions to Block Further Outputs Before Button Release
Hi, I have an idea - give us a checkbox or Output Action to block further outputs if an action is triggered after the button press and before the button release. Here's what I mean: I want to be able to copy, paste, highlight, and cut by holding the bottom
Mouse movement remapping improvements
I often play strategy games or moba like top-down games where character movement and camera movement is bound to mouse. Click to move and move cursor to screen edge to move camera. I own Azeron which has thumb-joystick that i can no longer game without.
X1 Control Panel via Remote Desktop?
Is anyone an expert in with Windows Remote Desktop remote desktop Settings and the use of and advanced mouse application? The Creator and X1 Control Panel installed on my home computer (lenovo thinkpad Win10) and remote desktop connected to work computer
How using Tilt/Roll in War Thunder ???
The question is simple.. but i don't know what to map on X1 Control Panel to be able to use Tilt/Roll with Helicopter in War Thunder. Is someone can help me... (i'm using Linux) but Z2 working Well here... Second question : how to map "Deep Click" without
CTRL + left click with Creator
There is reference to CTRL+Left Click in the FAQ for the Z starter mappings but I havnt been about to figure out how to do this with the creator
How to create Macros with Creator?
Breaking out in a cold sweat wondering if I just spent the last 3 hours learning and falling in love with something that isnt going to work. I have come across a few references to Macros. I know the Z has it (they are just impossible to get) and 3 years
Custom Images/Animations on OLED
Would be nice to upload custom images and animations to the oled.
Disable haptic feedback on X1 Control Panel connect
Hi, I use my Swiftpoint Z on a switchbox and also ordered a new Z2 which is now on the way to me. From your Updates I learned that I have to update my Swiftpoint X1 Control Panel app to prevent it trying to downgrade the firmware of the Z2. I was previously
Problem updating Firmware on Z1 [already solved]
After updating X1 to 3.0.5.0, I was invited to update the firmware on my Z1. Unfortunately, the firmware update just sat there fore over 10 minutes (and the mouse still worked) so I killed the X1 control panel and restarted it. This condition persisted
Mouse Movement Mouse Pointer.
I am just testing and experimenting with the features on my Z . I saw one of the features as pictured. I can't seem to find it or enable it - I wanted to see what I could do with it. All I see is Mouse Movement - which assigns an action. I am using expert
Key event down/up should default to mouse button press/release respectvely if only one key is pressed during the Record Keystrokes feature
This is my biggest gripe with the advanced mode and has been since years before simple mode existed. This what I input manually over 99% of the time and there are way too may steps involved that don't have to be there. This is so important because games
Does X1 support "pan" gestures?
I've been using a Logitech mouse for years and I'm excited to switch to a Swiftpoint Z. One of the features I use on the logitech mouse all the time is the ability to "pan" throughout a window (Logi calls it "pan" under their gestures macros). It essentially
Tilt calibration no longer fixes the tilt angles
Recently I’ve been using a significantly skewed desk (the bolts weren’t as tight as I thought they were). After leveling it, I tried to calibrate my Z1, but the progress bar got stuck. I moved the mouse by mistake, and decided I might as well shut down
Adding Support for the Function Key on a keyboard in the software
I think it would be useful for those who have smaller keyboards or use special keypads for games and the like if the we were able to map the function key to a button on the mouse. Example would be for a game that uses the number keys (0-9) and the respective
Swiftpoint Z gen 2 suggestions
Hello folks and Bryce, Below are some suggestions about upcoming SZgen2 (based on Gen1 experience), ranged from major to minor. --hope I'll be clear enough First part will be based on comparison with Roccat Tyon (on par with SZ in terms of "favorite mouse")
Linux support
Will be switching to linux OS soon but there seems to be no software for linux for the swiftpoint z mouse.
scroll sensitivity issue
hey, even with the minimum sensitivity its near impossible to use. how can we use less than 1? i want every 4 bumps on the wheel to be 1 scroll action.
Simple Mode - Drag & Drop Keybinds
Hi, I play Fortnite so I'm constantly messing with new settings and keybinds. In Simple Mode a convenient and easy feature to have would be to be able drag and drop my existing keybinds into a new mouse keybind slot. It should swap with the existing keybind
Swiftpoint Z shell project
A year ago, I made this post requesting STL files so I could make a new top shell better suited to fingertip grip. A year later and the bulk of the Z is bothering me even more as I have further improved my mouse control for FPS games and feel even more
Profile Auto-Switch in Starfield, Specifically
Hullo everyone! I noticed some difficulty getting auto-switch to work in Starfield, having to alt-tab out and back in once a session; once I started using SpecialK to fix its HDR problems, auto-detect never worked. I did enable logging and added some
Why don't X1 users get the productivity wheel too?
Title. I don't know alot about the feature or the history of X1 and P3, so I won't make up a whole story.
Mapping The L/R Mouse Buttons
I Play Shooters (SE5) And I Use My LMB To Shoot And My RMB To Scope. I Can Add A Deep Press Command To Both. Any Suggestions On What Commands To Use? I Hate To See Mouse Commands Go To Waste.
Deep click question
I setup left click deep click to change weapons in Fortnite however if I press the left click too quickly it changes from shortgun to smg without shooting the shotgun. Is there a way to make sure shogun shoots before switching to the smg? 2 is my shotgun
Swiftpoint Z2
I've change banks since I pledged under the 2/23/2023 kickstarter offering for my Z2. When was the money going to be withdrawn and when are you expecting to ship the first batch of Z2's?
"Tapping" and "Pressing" the same button to configure two different functions
An example of what I want to do: Tap Top Thumb Button: Forward Press Top Thumb Button (Hold Down) + Tap Left Button: Search (Ctrl + F). Tapping works fine. When I Press Down, the Search function executes, and when the Top Thumb Button is released, then
Option for Media- and System-Variables as Text
Hi, it would be great to have the option to use Text-Variables like in this example: It would also be great to use those Texts in other Outputs Thank you, Kevin
Trigger buttons hold down?
Can I use the trigger buttons for voice comms (PTT in BF2042) while holding the button down? I can only get it to stay on for a second or 2, am I doing something wrong?
Issue with sub-profiles and modifier key setups
I have a main "desktop" profile where I use top and bottom thumb button as modifier keys (e.g. Front Edge = forward, but Top thumb + front edge = home) and I was hoping to set up a sub-profile where I could add to those. Unfortunately, I've found out
Macro stop help.
Hello there, I need help with a loop. Just for an example, I set this spam button up. Hit the button, it infinitely clicks left click, good for spam clicker games and such. But I'm wondering how to set it up to stop repeating the action. I would like
Next Page