How do I get a replacement set of tilt feet?
The pandemic has had me move three times since it began, and the feet labeled '1' have gone missing from storage as they were on the mouse. How do I order a replacement tilt feet? I used the tilt feature 100% of the time and I want to use this mouse again
Swiftpoint X1 Control Panel not working
I've tried uninstalling and reinstalling, restarting my computer and changing install location, however the software will not start.
Oled screen fall off.
Hi The mouse screen fall of (first day of use) still with cable and working. Change or fixing? From Amazon. Except that great mouse for unreal engine.
MMB always at 100% force
I noticed recently that my MMB doesn't behave right, I had a deep click action set at >30% force, with default MMB behavior at <30%. OLED screen shows constant 100% force on MMB with lightest touch now. Also, no less than 60% force on LMB. I guess this
disabling auto update
I would like to find out if there is a way to stop the auto updates. I will manage checking and updating software. I would prefer not to have to resort to firewalling the software in, but will if its the only way.
Win 10 won't hibernate with Z/Tracer
Hi since I have been using swift point mice (both Z and Tracer)my computer wont go into hibernation when the computer is left alone I never realised it was the swift point mouse until I unplugged the mouse to do some cable management and within minute
Button dimensions
I was wondering if you could provide the exact dimensions of the right mouse button and the left mouse button to make custom griptapes.
Forum functionality
Would it be possible to upvote comments? If a thread is really long, being able to sort the replies by votes would be nice. In the profile of users on the forum, you gain exp by engagement, upvotes on comments do not need to be weighed as heavily as a
Switch to the last used Profile
A few days ago, my PC turned off unintentionally and after the reboot, all my profiles where lost. Since then, i try to recreate a config, without success.. I want a "Profile Change" to the last used Profile. When i tilt my mouse 1,5% to the left, my
Where can I find the 16 pre made profiles for gaming?
The page for the Swiftpoint Z says: "The Swiftpoint Z supports all software and games, and comes with 16 pre-made profiles for some of the leading titles in gaming." Where can I find these profiles? Pre-made profiles include: Apex Legends, Borderlands
Sharing profiles
I got the SwiftPoint Z mouse, still getting used to it, but so far love it. A question is why there are no pre-made profiles, everything need to be manually setup. Why cannot put online other people's profiles / games, so that can be easily downloaded?
Import doubles bindings
I noticed today: when I import a saved profile, on one of the mappings, it doubles every keybinding, so I have lmb bound twice, rmb twice and so on
Sharing profiles for productivity - Thread
Hi, There are few profiles in this new forum. I am sharing my profile for "desktop" general usage for all apps. It needs to be revised, but can hopefully be of use either if you want to copy or adapt some techniques I have developed or seen on the previous
Marco to press both mouse buttons
I just got my Swiftpoint Z and I'm really liking it. I'm struggling to figure out how to configure a macro to simultaneously press RMB and LMB. Is this possible?
Bug in Text String output action
Hi there, i might have found a bug with the output action "Text String". The string which should be entered is (1): KCi{]ar-4eL;TicG9+k9 Actually it writes (2): KCiÜ+arß4eLöTicG9`k9 (just written with the action) I guess its because i have a german keyboard
Quick record and create macro on the go
You can select one button of your mouse to start recording and then select other mouse key Perhaps add a setting to check as "macro holder" that key so you don´t mess up other macro keys while recording a macro After that you can start recording the macro
Is it possible to use the pressure clicking for sculpting in Blender?
It would be amazing for 3d sculpting if I could use my mouse for pressure sensitivity instead of a tablet. I'm not sure if you'd have to emulate pen input pressure for windows, or directly communicate with the Blender software. I'm tempted to purchase
Recalibration for Z's Deep Click Sensor
My Swiftpoint Z could not precept its all 5 pressure sensitive buttons correctly, when I press them, they just cannot reach Force 100%. I also didn't find any way to recalibrate it neither in mouse's user guide nor X1 control panel. By the way, where's
How can I use one input to modify the function of another input?
Hi there, are there anywhere other sites with more examples or tutorials? I am new to the Z and I find it difficult to assign the buttons if you have special needs :) I am a software developer so I am used to google and find stuff out on my own but this
JSON script reference
I'm trying to construct a complex macro that involves moving the mouse a predefined number of times and am wondering if this could be accomplished by hand coding the macro? In the mappings option I do not see a action for moving the mouse at all. Basically
Vibration when entering/exiting "Config Mode"
Hopefully this is a simple question, I want to do 1 of 2 things, either 1) turn off the ability to enter config mode when tilting the mouse or 2) simply turn off the vibration when entering/exiting config mode. Can someone help me with this? I cant seem
Support?
This should be interesting, the new support area is active right now as was the old one when it launched. Within a few months the support forum became a ghost town because literally no one responded to anything, not even the growing barrage of abuse at Swiftpoint and its non existence. I even emailed the MD to Express my concerns, couldn't even be bothered to reply. I own a Z mouse and in 27 years of PC gaming its the best mouse on the planet and I'll buy another, but the support? We'll see..
Z mouse modifications
Would anyone who has gone ahead in modifying their Z mouse, be able to tell me what mods they have done to their Z mouse. I have already gone ahead and put a DIY lizard skin grip on my Z, and am soon planning to replace the stock Teflon feet with Virgin
Profile Switching 'Names' on OLED not appearing when rotating mouse?
Okay, I submitted a ticket for this and then closed it, thinking I solved my own problem. I didn't, it just keeps coming back again and again, whenever I try to make a new profile. I will now copy and past my ticket below: ---- I am rather new so hopefully
Swiftpoint Z Vibration Motor
Hello Bryce, just a question whether the swiftpoint Z uses a linear resonating actuator aka a vibration motor that is capable of sharp sensations and not just a rumble?
What directory are profiles saved to?
Something is wrong with Swiftpoint X1 Control Panel and it will not launch. If I had to guess it became corrupted by an unstable overclock. I want to reinstall everything, but I want to backup my profiles first. I don't know what directory my profiles
The next software update
Hello, I was just wondering if you would know about the next update coming to the x1 control panel. A couple posts back I saw that you mentioned something about the next update and was wondering if that is happening anytime soon? Does this in any way
Firmware update fails
I downloaded the X1 Control Panel and started the firmware update,an "Update Failed" error displayed every time.I also tried old 'Swiftpoint Driver' software but no difference."Error: 1" displayed by older versions.
X1 not auto switching properly with tracer
I recently purchased a tracer and a second z and upgraded to the x1 software and have had nothing but issues with profile auto switching. X1 is ran as admin and when I enter a game I usually have to tab out and back in 1-3 times for it to kick on as well
Joystick function does not work
Hello everybody, I have had my Swiftpoint Z since yesterday and therefore I am not very familiar with the software. As it says above, my problem is that the mouse is recognized as a joystick, but no joystick inputs are recognized. Inputs are also not
Isolate Deep press?
Is the a way to perform the deep press function without triggering the primary function before it?
Swiftpoint Z X1 Control Panel auto detect doesn't see Star Citizen
Recently my middle mouse button stopped working. In the course of trouble shooting it I deleted my profiles and switched from the old software to the X1 control panel. The sensor cleaned and mouse reassembled I am now trying to add my profiles back in
Question about mouse being legit
Hello, I ordered my Z mouse the other day and had some concerns after hearing and reading some things. So my friend told me it should come with a case for the mouse and if it doesn’t then it’s not a legit swiftpoint. Is this true?? I didn’t think too
Swiftpoint X1 won't "start" with windows (10)
Hello there! I've been enjoying this mice for the last week ^^ (Swift-point Z) But I've been dealing with this issue that, every time I restart the computer, the program doesn't start, and because of this, I don't have the "switch profiles automatically"
Swiftpoint X1 Control Panel Beta Testing
If you'd like to be involved in testing beta versions of the software for our Professional Range mice check the thread linked below for more details (Community account required)
Display the Z mouse in real time in Simple Mode
What I mean by this is, have a distinct Z/TRACER replica model in the simple mode version of the software, that clearly displays and previews things in real time like the deep click force levels and vibration strength through a gauge rather than a percentage.
Ability to add random delay
It would be quite neat, if you could add a random delay as in wait something in between 5 and 10 ms.
More Supported Game Mappings
We need more Official Mappings in the software. I've been hoping to see the games below get supported (And with support for Tilt Controls) Zero Hour Elite Dangerous Black Desert Online Tarkov Enlisted Squad
An (optional) Introscreen on startup
By this, I mean for the sake of clarification, less digging through into individual pop ups, and effectively telegraphing these sections that may go unnoticed to the users. Have an optional introscreen on startup, that could say display sub panel categories all
A "Gamepad Tester" within Simple Mode
This would be kind of similar to how the application 'switch hitter' works for keyboards. Think of it as a troubleshooting tool, that displays a live preview of the mouse indicating whether it is working as it should be; outputting the correct keys, mappings
Next Page