300 Series USB Pairing/Reset Instructions

If you wish to reset your 300 series mouse to its default settings, or pair it to a USB please follow the instructions below.

1. Insert the USB receiver into your computer.
   
2. While holding down both buttons, repeatedly turn the scroll wheel until both LED lights turn on (this may take up to 15 seconds)
   
3. Let go of the buttons and hold the mouse close to the USB receiver. The lights will turn off when the mouse has "paired" with the receiver.
   
4. Try using the mouse (you may need to click the button to start it). 
   

If both LEDs on your mouse light up during the reset process but it does not connect, there could a problem with your USB receiver. So try the process again via a different USB port to confirm, then if that does not work you may need a new USB receiver. Check the article below for details on this.

Replacement USB Receiver for 300 Series Mice

Alternately, if the two LED's do not light up, then unfortunately there is a problem with the mouse itself.

• Related Articles

• Swiftpoint GT Factory Reset

  To Factory Reset your GT and restore all of its internal settings to default, please follow the steps or video below. Remove any existing Swiftpoint GT Bluetooth pairings to any nearby computer or device. Make sure your USB receiver is connected to ...

• Convert GT/ProPoint USB Receiver to enable compatibility with 300 Series Mice.

  Convert GT/ProPoint USB Receiver to enable compatibility with 300 Series. Performing this procedure will enable compatibility with 300 series mice, but disable the receivers compatibility with both the ProPoint and GT. It is also irreversible, so ...

• Replacement USB Receiver for 300 Series Mice

  The Wireless USB Receivers/Chargers available on our website are not normally compatible with the 300 Series. But it is possible to enable compatibility.  So if you need a new USB receiver for your 300 series mouse you can purchase one here. Then ...

• Pen-grip mouse Factory Reset

  If you are having problems with the connection to your mouse, or connecting to your mouse at all; a factory reset may help get you up and running again. The steps to perform a factory reset are as follows: Set the switch on the base of your mouse to ...

• Swiftpoint GT USB Receiver Troubleshooting

  If your GT is working correctly over Bluetooth, but you are unable to connect with your USB receiver, please try the following steps in sequence: 1. Re-pair your GT to its receiver Your GT may have just lost its pairing to your receiver. Please ...