How do I pair the Swiftpoint GT over Bluetooth?

How do I pair the Swiftpoint GT over Bluetooth?

To pair your GT to a device over Bluetooth just follow the steps below.
  1. Go to the Bluetooth device menu in your system settings.
    • Windows: Settings > Devices > Add Bluetooth device or other device > Bluetooth.
    • MacOS: System Preferences > Bluetooth.
    • iOS/Android: Settings > Bluetooth.
  2. Ensure Bluetooth is switched on on your device.
  3. Remove any existing “Swiftpoint GT” entries in the list (and from any other devices nearby).
  4. While holding down the front button, move the switch on the underside of the mouse from OFF to ON. Release the front button once the LED starts to flash.
  5. When “Swiftpoint GT” appears in the list of searched devices, click on the device name to pair with the device. The LED will light up green for a few seconds when the pairing is complete.
  6. Once the pairing is complete and your GT is working over Bluetooth. Switch it off for a few seconds then back on to ensure the connection resumes after being powered off.
  7. If you encounter a problem, cycle the On/Off switch and try again.
Windows 7 does not have the required Bluetooth 4.0 support to pair with the Swiftpoint GT. So the USB receiver must be used instead.