How do I pair with my Pen-grip mouse over Bluetooth?

How do I pair with my Pen-grip mouse over Bluetooth?

The pairing process for the Swiftpoint GT is mostly the same as below, but not all of the details apply. So please refer here instead for pairing instructions if you have a GT.

To pair your pen-grip mouse mouse to a device over Bluetooth please follow the steps or videos below.
  1. Go to Bluetooth device menu in your system settings.
    • Windows: Settings > Devices > Add Bluetooth Device.
    • MacOS/iOS: System Preferences > Bluetooth.
    • iOS/Android: Settings > Bluetooth.
  2. Ensure Bluetooth is switched on on your device.
  3. Remove any old inactive pairings with your mouse from the Bluetooth device list.
  4. While holding down the front button, move the switch on the underside of the mouse from OFF to ON (Making sure not to stop on PRESENT).
  5. Release the front button once the LED starts to flash orange.
    6. If you hold the front button for more than 5 seconds, the mouse will change to USB Receiver pairing mode and flash green.
  6. When your Mouse appears in the list of searched devices, click on its name to pair. The LED will light up green for a few seconds when the pairing is complete.
  7. If you encounter a problem, cycle the On/Off switch and try again.
Pen-grip mice can store up to 3 Bluetooth pairings in memory. When you create a new pairing the two most recently used connections will also be maintained.

Windows Bluetooth Pairing Demonstration



macOS Bluetooth Pairing Demonstration



ProPoint is used for the demonstrations, but this applies to all current generation Pen-grip mice. 

    • Related Articles

    • How do I pair my Pen-grip mouse with a USB receiver?

      To pair your Pen-grip mouse to a new USB receiver please follow the steps below: Only USB charger/receivers can be paired with. If you have a USB charger with orange Swiftpoint branding (as included with TRACPOINT, PadPoint, PenPoint, SurfacePoint, ...

    • My pen-grip mouse is paired over Bluetooth but is not reconnecting.

      If your mouse is showing in your Bluetooth device list as paired, but is not connecting when you switch it on; one of problems described below could be happening. You should be able to tell which, based on how the light on your mouse responds when ...

    • Swiftpoint P3 Control Panel Download (For ProPoint, SurfacePoint, TracPoint, PadPoint, PenPoint, GoPoint & ErgoPoint)

      The Swiftpoint P3 Control Panel supports our current generation pen-grip mice including the following models; plus ErgoPoint: ProPoint SurfacePoint TracPoint PadPoint PenPoint GoPoint P3 Control Panel Downloads Windows 10/11: P3 Control Panel ...

    • How do I update my Pen-grip mouses firmware?

      Keeping your mouses firmware up to date will give you access to the latest features and improvements. Updating on Windows or macOS PC Firmware updates can be performed with our Swiftpoint Control Panel software on a macOS or Windows 10 PC that has ...

    • Pen-grip Mouse User Guides

      A quick-start guide will be included with your mouse, but you can also download PDF versions from the links below. Pen-grip Quick Start Guide & Regulatory Information English - QSG & Regulatory Information ProPoint User Guides: English – User Guide ...