X1 Control Panel 3.2: A Tour for Expert Mode Users

X1 Control Panel 3.2: A Tour for Expert Mode Users

X1 Control Panel 3.2 brings Simple Mode and Expert Mode together in one window. This means a lot of changes for those familiar with Expert Mode. But everything you relied on is still here, and this tour shows where it went and what's new.

For the full list of changes, see the Swiftpoint X1 Control Panel Beta Changelog.

Finding your way around

  1. Expert View replaces the Simple Mode and Expert Mode buttons. 
  2. Layout sets what sits beside the mapping list. 
    1. Auto only shows if there is enough horizontal space in the window.
    2. Always always shows this UI element next to the mapping list. Increases the window's minimum width.
    3. Never hides the UI element while the mapping list is open. Reduces the window's minimum width.
  3. Back, or Esc, returns to the Overview from the other sections, or from the output list back to mappings if they are not shown side by side.
  4. Three sections: Profile Settings (was Settings), Overview and Mappings (was All Mappings). Expert View reopens on the section you used last.
  5. Save now says Saved when there's nothing to save, shows its progress in place of the progress popup, and warns when the profiles are too big for the mouse's memory. Ctrl+S (Cmd+S) saves.
  6. Filter by input and Show inherited, described in All mappings, including inherited below.
  7. Active Profile (was the *Active Profile box) picks the profile the mouse runs, including Global.
  8. Profile bar tools: filter profiles (Ctrl+F), add a profile, and Manage Profiles for premade profiles, import and export.
  9. The sidebar: battery and memory (were in the bottom bar; their percentages are now off by default: click either icon to show them), Devices (was Manage Devices), What's New and Settings. What's New and Settings used to open from the main menu as separate windows, and are now pages in this window. The table at the end shows where the rest of the main menu went.

Profile bar

Simple Mode's profile bar is now used in Expert Mode too, which brings several QoL improvements. 
  • Profile Icons: Each profile can have an icon added. One will be added automatically when you link it to an executable. 
  • Rearrange profiles: Profiles can be rearranged via drag and drop.
  • Profile Filter: Filter the profile bar by profile or linked app name with the filter button or Ctrl+F (Cmd+F). 
    • After typing, press Enter to switch to the first matching result.
  • Ctrl+Tab and Ctrl+Shift+Tab step through your profiles (Control+Tab on macOS).
  • Display Options: If you prefer a more compact profile bar, choose Icons only or Labels only under Settings.

Overview: start from the mouse

The Overview shows every input with its action and, under it, the one mapping nested in it, or + N more when there are several. Click an input on the mouse, or its callout, to jump to its mappings in Mappings. DPI, the logo and the screen jump to their settings in Profile Settings instead.


The Tilt left / right and Tilt forward / back buttons are gone: click the tilt icons in the Overview's bottom corners, or the tilt arrows on the mouse picture.

All mappings, including inherited 

The Mappings view lists every mapping in the profile. With Filter by input on, picking an input shows only its mappings; turn it off to always see them all. Nested mappings fold away with the chevron beside them, or use Expand all / Collapse all.

Show inherited adds what the profile gets from Global or its parent profile, marked with a dashed outline and a link icon , and faded. Edit any of them to override it in this profile: the profile gets its own copy, with a revert button (↺) to go back to the inherited one.

Show inherited is off by default. Then a box at the end of the list says how many mappings are inherited, with + Add mapping to override an input from scratch. It replaces the old Add mappings page and Remove / Restore.


The mapping bar


  1. + adds a nested input, which works while this one is held (was Add in the mapping menu).
  2. The action (name and outputs) opens its output lists for editing.
  3. The rest of the bar opens the action library. Once it's open, type to filter the list.
  4. Record: press keys, mouse buttons or scroll the wheel, and they're recorded onto the mapping.
  5. ⋯ menu: Copy, Paste and Save to action library, as before, and the new Clear mapping, which replaces Clear Outputs: it empties the mapping completely (outputs, name and nested mappings) to start it from scratch.
    1. Copy and Paste now use the system clipboard. A copied mapping is plain text, so as well as pasting it into another profile, you can keep it in a note or send it to someone.
  6. ↺ reverts an overridden mapping to the inherited one. The profile's own mappings have ✕ to delete them (was Delete Input).


Drag and drop

Drag a mapping by the grip that appears at its left to put it somewhere else in the list. Hold Ctrl to drop a copy instead.


Drag an action's name onto another mapping to swap their outputs, or hold Ctrl to copy them.

To move just a press or release line's outputs, drag the grip that appears on the arrow to the left of them.

Output lists

The Press and Release output lists are always shown, and each header folds its list away. Drop an output on a folded list's header to add it at the end, or drag the Release header up or down to move outputs between the two lists.


An output's first dropdown now changes its category, for example from a key to a mouse click, without deleting the row. ‹ All categories at the top lists them all.


Profile Settings: one setting at a time

The Add settings page and the Remove settings button are gone. A profile now overrides settings one at a time, and the rest stay inherited. With Show inherited on, change any setting to override it: it starts from the inherited value and gets a revert button.


With Show inherited off, + Add setting picks a setting to override.


Output Actions can now be recorded in Profile Settings, like a mapping's outputs.

The action library and new outputs

The action library now includes most mouse settings (such as DPI, polling rate and lift-off height) and the OLED screen modes. It only lists what the mapping's input supports. Some example complex mappings, such as Config Mode, DPI Shift, Rapid Fire, Toggle Hold and Scroll Gesture, were also added. 
The small +N badge shows how many nested inputs an entry adds. 


New joystick outputs: Joystick Axis puts a stick axis or the slider at a set position from any button, and Joystick Hat drives the hat switch. The axes now include Z Rotation, are named as Windows names them (X Axis, Y Axis and Z Axis, were Left / Right, Forward / Back and Rotate), and can be turned round with Reverse. An analog deep click can drive any stick axis, not just the slider.

The Polling Rate can now be set by an output under DPI & Tracking. On a Z3, the rate holds until the mouse's USB or SwiftLink connection changes.

Mouse > Movement on a Mouse Movement mapping can now Follow Mouse, so the pointer keeps moving with the mouse while a gesture mapping is active, instead of standing still.


Pages and settings

Devices (was Manage Devices) still has a card for each connected mouse and receiver, with Test Connection, pairing and saving to flash memory. A mouse's card now also has what was in the main menu: force and tilt calibration, and resetting the flash memory.

Settings has new Interface options: Theme, Profile bar, the two Layout choices, Mouse slide animation, Show vibration widget, and battery and memory percentages.

Theme: Auto follows the connected mouse, or pick Z, Tracer, Creator or Classic. Classic is based on Expert Mode's look before version 3.1.


Where did it go?

In Expert ModeIn 3.2 Expert View
Simple Mode buttonTurn off the Expert View switch
Main menu > Options, Check for New UpdatesSettings (gear in the sidebar)
Main menu > What's New, View Introduction and User GuidesWhat's New (sidebar)
Main menu > Save / Reset Mouse Flash Memory, Calibrate Tilt Angles, Calibrate Force SensorsThe mouse's card on the Devices page
Manage DevicesDevices page (mouse icon in the sidebar)
*Active Profile boxActive Profile, top left
All MappingsMappings
Tilt left / right, Tilt forward / backThe tilt icons on the mouse image
Add settings page, Remove settings+ Add setting, or change an inherited setting; ↺ to revert
Add mappings page, Remove / Restore+ Add mapping, or edit an inherited mapping; ↺ to revert
Show output list in second columnLayout > Output lists beside mappings
Show Press & Release output listsAlways shown
Mapping menu: Add, Delete Input, Clear Outputs+ and ✕ on the mapping bar; ⋯ menu > Clear mapping
Block parent mappingsSkip parent release, the same option renamed
Joystick axes Left / Right, Forward / Back, RotateX Axis, Y Axis, Z Axis (and the new Z Rotation)

Shortcuts

  • Esc: step back, like the mouse's back button.
  • Ctrl+S (Cmd+S): save.
  • Ctrl+F (Cmd+F): filter the profile bar.
  • Ctrl+Tab / Ctrl+Shift+Tab: next / previous profile (Control+Tab on macOS).
  • Ctrl+drag: copy a mapping or outputs instead of moving them.