X1 Control Panel 3.2 brings Simple Mode and Expert Mode together in one window. If you used Simple Mode, the main screen will feel familiar. This tour shows what has moved, and the new things you can do without switching to Expert View.
For the full list of changes, see the Swiftpoint X1 Control Panel Beta Changelog.
The main window at a glance
- Expert View replaces the Expert Mode button. Turn it on to add Expert Mode's tools to this window, and off to come back to the Simple View. It stays as you left it next time.
- Active Profile picks the profile the mouse runs, and now lists Global and sub-profiles too.
- Global Defaults is always on the profile bar now, with a globe icon.
- The profile bar's buttons: filter your profiles by name or linked app (Ctrl+F, or Cmd+F on macOS), add a profile, and Manage Profiles for the premade profiles, import and export.
- Save now says Saved when there's nothing to save, shows its progress in place of the progress popup, and warns when the profiles are too big for the mouse's memory. Ctrl+S (Cmd+S) saves too.
- The mouse's battery and memory. Memory use was in the mouse popup before, and now has its own icon. Click either icon to show or hide the percentages.
- Devices, What's New and Settings now open as pages in this window. Devices replaces the mouse and receiver popups.
On the overview screen each input now shows what's nested under it as well as its action, not just its deep clicks.
Tip: Ctrl+Tab and Ctrl+Shift+Tab step through your profiles (Control+Tab on macOS). Esc steps back from any page, like the mouse's back button.
Editing a Mapping
As before, click an input on the mouse, or the action written beside it, to change what it does. The mouse slides aside and that button's mappings are listed beside it. Back, or Esc, returns to the whole mouse.
Each mapping is a bar with its input on the left, and action on the right with a few new/changed buttons beside it:

- The action (here, Copy). Click it to open the action's outputs, described below.
- The rest of the bar opens the action library. After opening start typing to filter the list.
- Record: press keys, mouse buttons or scroll the wheel, and they're recorded onto the mapping.
- ⋯ menu:
- Copy/Paste: copy a mapping and all its nested mappings between profiles or inputs.
- Copy also puts the mapping into your clipboard as plain text, where it can be saved in a note or shared with someone.
- To paste a shared mapping, copy the text into your clipboard then select Paste from the mapping menu.
- Save adds your mapping to the custom action library, where it can be added to any other input that supports it.
- Clear mapping removes all outputs and nested mappings.
- ✕ deletes the mapping and all nested mappings.
- Vibration now shows by default on inputs without a click of their own (deep clicks, tilts and movement), and on any mapping that already vibrates. It lights up if the mapping includes a vibration.
- Settings > Interface > Show vibration widget changes this.
- + Add Input adds a nested input that works while its parent input is active, like the Deep Click under this fingertip.
Action library Updates
The action library now includes most mouse settings (such as DPI, polling rate and lift-off height) and the OLED screen modes are in it too. It only lists what your mouse and that input support. Its Joystick group has new outputs too: a stick axis or the slider at a set position, and the hat switch. Some example complex mappings such as Config Mode, DPI Shift, Rapid Fire, Toggle Hold and Scroll Gesture were also added.
The small +N badge shows how many nested inputs an entry adds.

Full Output list, not just rename
Clicking an action used to open a dialog to rename it. Now it opens the same output list Expert Mode uses, so you can see and change exactly what the mouse sends, including macros.
- Action Name: rename the action here.
- Press outputs are sent when you press the button.
- Release outputs are sent when you let it go. Click either header to fold its list away.
- Add outputs with:
- Record adds outputs as you press them on your keyboard or mouse.
- Record Waits automatically adds waits between outputs added by Record.
- + Add output action adds an output by hand, including output types Record can't add.
Recording now picks up mouse buttons and the scroll wheel as well as keys: click or scroll over the record pad. A key held while you scroll is recorded with it, so Ctrl + scroll works.
Back returns to the mappings. To keep the output lists open beside the mappings instead of in their place, use the Layout button next to the Expert View switch, or Settings > Interface > Output lists beside mappings.
Global/Parent mappings and your profiles
A profile uses its parent or Global's mapping for any input it doesn't set itself. A mapping inherited like this is marked with a link icon
on its right edge. Hover your cursor to see where the mapping comes from.
Editing an inherited mapping overrides it in this profile without affecting the original mapping. The link icon becomes a ✕: click it to delete the profile's copy and go back to the inherited mapping.

DPI, polling rate and lift-off
Click the DPI above the mouse to set its DPI levels. The polling rate and lift-off height, which only Expert Mode had before, are now on the same page.

- Separate X&Y DPI level can now be set here too, even with a single DPI level.
- Maximum Polling Rate and Lift Off Height.
A mapping can change the polling rate too, with the new Polling Rate output in the action library. On a Z3 the rate it sets holds until the mouse's USB or SwiftLink connection changes.
All Mappings are now visible and editable
Previously some tilt mappings were hidden in Simple mode, and analog mappings could not be added or edited. Now they will all be visible and editable, including Config Mode.
Click a tilt icon in the bottom corners to see that pair of tilts. Each direction still lists its first tilt, and now also any other tilt with an action.

- Large groups of nested inputs like Config Mode fold away behind Show N Nested Mappings. Click it to open them.
- Analog tilts, pivots and deep clicks can now be added and edited in the Simple View.
Devices, What's New and Settings
Devices: the mouse and receiver icons in the sidebar are now one mouse icon, which opens the Devices page. It has a card for each connected mouse and receiver with everything the popups had: memory use, force and tilt calibration, saving to or resetting the mouse's flash memory, Test Connection and pairing.
Settings: the Interface section has some new options.
- Theme: Auto follows the connected mouse, or pick Z, Tracer, Creator or Classic (Expert Mode's look before version 3.1) to keep one look.
- Profile bar: icons and labels (default), icons only, or labels only. Each reduces the amount of space taken up by the profile bar.
- Mouse beside the editor and Output lists beside mappings: what sits side by side (also on the Layout button), and Mouse slide animation.
- Show vibration widget: choose whether to show the vibration button on each mapping widget.
- Show battery and memory percentages beside the sidebar icons.
Where did it go?
| In Simple Mode | In 3.2 |
|---|
| The Expert Mode button | The Expert View switch, top left |
| The mouse and receiver popups in the sidebar | The Devices page (mouse icon in the sidebar). Memory use has its own sidebar icon. |
| Show Global Profile setting | Gone: Global Defaults is always on the profile bar |
| Click an action to rename it | Click the action to open its outputs, and rename it under Action Name |
| The hints along the top of the window | Gone: tooltips now cover what the hints said |