Universal Skate Compatible Feet
You’ve already got the bottom of the mouse ready for a really cool feature! Hot swappable feet with different universal skates. imagine every customer buying a four pack of feet that would be optimized for universal skates like x-raypad jades or obsidians.
Is it possible to configure the PenPoint so that tilting the mouse left or right triggers the left/right arrow keyboard keys?
Is it possible to configure the PenPoint so that tilting the mouse left or right triggers the left/right arrow keyboard keys?
Winsows 10 to 11. Can't load my backup file.
Hi, i went to Windows 11 and installed the swiftpoint app. I made a backup a few months back but I can't upload it. Do I have to remap everything, or is there a way to load the backup into the app? Thanks
Double Click/Roll?
I REALLY want to be able to use the roll feature in things like Unity for switching before input types, but the mouse is easy enough to roll when moving I want to be able to double-roll to activate to make sure it's an intentional act. I don't see anything
Configurable Axis Offset
Does the software have an adjustment to set the orientation of the main sensor orientation? If not, it should. The mouse is large and heavy, which means I hold it a little different. It would be nice if I could input a positive or negative number to adjust
Lag In Mouse Movement
After @5 Years, I Think My Z1 Is Failing. The LED Doesn't Work (Which Is A Moot Issue For Me). I Can't Get The Tilt Feature To Work. Now The Mouse Has Developed A Noticeable Lag. Is There Something I Am Missing? It's Been The Best Mouse I've Owned. But
Button setup
Is there a way to make it so my left mouse button doesn't actuate until I release it on the Z2? Like when using a sniper rifle in PUBG. Also, could I program the fire button to be able to switch between a regular button press, and one that actuates upon
Gyro visuals to show tilt and noise zones
It would be very nice to see live feed back in the app to show your current tilt angle and degrees as well as where you have your trigger settings and noise settings at. It would make setting up the advance tilt settings much easier instead of trial and
mouse gaming feet
What is the best mouse pad for the Z2? My Z2 moves like a brick. Lots of drag. Is there a better pad. The one I use no is a material pad.
Z2 display stopped working
The display screen on my Z2 has stop working. It does not respond with the rear and edge mapping buttons, to change profiles. ive attempted to unplug and plug back in but nothing i do seems to work. I ordered the Z2 on 12/15/2024 Thanks for the help.
money back guarantee return shipping
does the money back guarantee offer free shipping to return the item/refund the shipping price
xbox
how do i setup to use with xbox
MacOS profile switcher based on window title
Making this into a topic since the API thread wont let me post it for some reason :) I made a small applescript that checks to see if a particular window title is open on mac, and if so, switches to that profile, then it waits to ensure that window is
Pressed mouse buttons release on Profile Switch
Unsure if this (as i consider an issue/bug) is also present in the latest non-beta. I use Automatic Profile Switching, which is what made me realize the issue. This happens e.g when left clicking and holding from an active application bound to a profile,
When I hold right click the left click isn't registered.
As said in the title when i hold the right click and try to press left click its not registered (Essentially I can't use the scope), I also tested it with the button tester profile and its blinking but its hard to tell if it actually works.
Dota 2
Hello, Has anyone configured this mouse for Dota 2? I can't seem to make it work. Whenever I assign a function to the control panel, it does another action game. For instance, Instead of using an ability, it controls the camera. Thanks.
It does not make me move files or images to another program
Greetings I have a problem as an Explorer click on an image to move it and when I go to another "photoshop" program, the dragging is canceled. This thing happens to me for any file and program, practically does not drag anything into any other program.
Profile for Escape from Tarkov
Is there a profile for EFT? I just received my Z2 today and I really don't even know where to start with making a profile for this game. I've tried to assign my tilt feature to lean in which it doesn't work in game. If there's anyone that can share a
Profile For Tarkov
Is there a profile for escape from tarkov? cant find one and im not good enough to make one. Could anyone make one?
Difference between Z1 and Z2
Hello I am glad the Z2 is coming out because it reassures that my Z1 is not abandonware, but I wanted to ask what is new in the Z2 besides a new sensor? Is the only difference really just the sensor? I was hoping there might be a new Joystick mode that
My mouse has a lot of give before the button actually gets pressed on the left button.
I created a topic before but I'm not sure if anyone saw it as I think it got deleted. But whenever I click the left click on my Swiftpoint Z2, It has way too much of a gap before the actual button is pressed and It sometimes double clicks if I tap the
Is it possible to either regular click OR deep click, not both?
I'm trying to use regular click and deep click as two separate actions, not chained actions. 1) regular click presses A 2) deep click presses B I want to press either A or B, not always A then B when deep clicking. Is there a way to set this up in Expert
Is it possible to save a macro?
I have a combination of keys, let's say 1,2,3,4,5. I want to have this saved into a macro/group so I can use it interchangeably across different profiles or different buttons. Is this possible? I'm not seeing where I can save a combination of presses.
Right botton when hold, ⌘/Command & when press right click.
I'm starting and I would like to know if I can do this, Right botton when hold, ⌘/Command & when press right click. Thanks.
ARMA Reforger flight?/
Hi! im attempting to bind the joystick gyro function to my pitch and roll in game. i was able to set up the analog joystick and have it work properly in the gamepad and controller tester online, but in game it doesn't register any inputs. im grateful
Config Mode?
I have seen several references to a Config mode, someone said the mouse wouldn't switch profiles when in Config mode. But I cant find anything explaining what config mode is or what it is for. I think I understand that it is activated when tilt hits 25
Mouse skates for ProPoint
Anyone have any good suggestions for mouse skates for the ProPoint? I find mine keeps scratching on most surfaces and does not feel smooth at all. Mouse and surfaces used have both been cleaned with rubbing alcohol and any debris removed.
Button Placement and grip support
Hello. I bought your Swiftpoint Z mouse and want to share my feedback. I'm a dedicated Lol/WoW player and I'm using steelseries Legendary Edition mouse for playing and working for about 10 years. I'm in love with those two buttons around the mouse wheel,
Apple Silicon Swiftpoint X1 drivers and app?
Are there any plans to produce native drivers and apps for the Apple M1 & M2 processors?
How do I make an autoclicker macro? or any macro?
Hey fellas, I just made the switch over from Corsair branded products to this so I'm at a loss on how the X1 Software works. I'd like to set up a macro on my left fingertip button that will click once every 20ms. Can someone give me a step by step process
Please Research & Develop a MMO(Massive Multiplayer Online RPG) mouse
Hi Swiftpoint, I've been using the original "Swiftpoint Z" since 2018, and in 2024 now with the Z2. Personally, this is a well designed mouse and I can feel the passion put in this product's overall development/support and its a joy to play games with.
What happened to this company?
I ordered a mouse 3 weeks ago and received an email saying it was on its way with tracking number and would be here in 6-10 days. 3 weeks it still has not shipped from the origin. I have submitted contact requests and sent emails and no one gets back
X1 Control Panel Experimental Linux Version
Disclaimer: Linux is not an officially supported platform. This release is purely experimental, so comes with no guarantee that it will work on your system, or that it will receive further updates. A list of known issues is included further below. But
The scroll wheel on the Propoint changes pages on the iPad uncontrollably.
I've noticed that when I scroll the page on my iPad, the scrolling is inconsistent. Sometimes it scrolls an entire page, while other times it only scrolls a few lines. Is there a way to resolve this issue, or could it just be a problem with my mouse?
Linux support
Will be switching to linux OS soon but there seems to be no software for linux for the swiftpoint z mouse.
Goods tracking
Serbs, do you have some kind of package tracking so I can see where the z2 mouse I bought is going?
randomly clicking button
Whenever i slightly tilt my mouse to the right, even sometimes just moving it to the right it will randomly click E and I'm not sure why.
Vibration as a rumble motor?
Is it possible to use the swiftpoint z's vibration as a rumble motor similar to a controller?
How stop macro for Swiftpoint Z Windows 10
I want to do a clicker macro, but whenever I activate it, I can´t then stop it. This is how it looks I tried pressing again the key but it does not stop the macro. How can I do a clicker that only uses one key of the mouse and is able to stop when clicked
Metal scroll wheel upgrade.
Just wanted to share something that came out nicely. For the heck of it decided to see if I could get a nicer scroll wheel into the Z2. Surprisingly the metal scroll wheel from MX Master 3/3s shares exact dimensions with stock wheel portion. Result is
Next Page