Any chance we coud get STL files for the shell of the Z?
I have become a claw grip user since buying this mouse and I can't help but feel hamstrung by the left side of the back being so close to palm's thumb muscles. When switching from arm to wrist aiming on low sens and anchoring to the mouse pad with the
Fingertip Button STL
The rubber of my fingertip and trigger buttons is starting to deteriorate(they are getting sticky and when you put your nail on them, it leaves a noticeable groove). Would it be possible that we could get a 3D-File(preferably STL or obj) for them so we
3D Printable Z/Tracer/Creator button caps
Since my rubber button caps started deteriorating once again, I figured instead of buying new ones and paying more for shipping than the product itself, I figured why not put my 3d printers to use. https://www.printables.com/model/1277514-swiftpoint-z-button-caps
Cursor dissappears after Y axis drift?
Hi everyone, I'm currently using my original an much love SwiftPoint Z mouse playing Guildwars 2. I'm currently using the 3.0.7.20 driver and firmware 205 on Linux Mint 22.1. I've recently noted that my mouse cursor will disappear from the screen while
Z2 grip pads - replacement adhesive?
When discovering that my Z2's thumb-area grip pad began to slide out of its recessed location, I was happy to find this Knowledge Base article - https://support.swiftpoint.com/portal/en/kb/articles/pro-range-grip-replacements. Besides offering the helpful
x1cp API
o7 to Bryce and all it may concern =) I hope the Z2 storm ebbed away a bit by now? So i dare to write a dedicated proposal to something i already addressed on side-notes in the past. The x1cp is by far the most versatile and powerful tool for HID configuration
MMB Questions
Hi Swiftpoint, I have two semi related questions: 1. Since the mmb on one of my Z's is basically on its way out, I was wondering whether there was a way to only buy the pcb as a replacement or get enough specs to buy a suitable replacement switch so I
Allow stoping a specific loop instead of all loops
Hey, i have multiple loops, for example one that presses E every 10 sec and one that presses X ever 36 sec. i want them to run while i use the auto clicker macro.. but the macro is Press: (Left Click | loop 0 Times) and Release (Stop All loops) the problem
Suggestions for QoL for automatic creation of corresponding release to created presses
The way advanced mode's option to automatically create a corresponding release to a press is silly, except in very specific circumstances and it should work differently by default and have a toggle within the main interface proper rather than the options.
Swiftpoint Z2 - Left Trigger Pull just not working
Received my Swiftpoint Z2 last week and finally got a chance to unbox and program it, and the Left Trigger Pull is just not working. Anyone else had an issue with one of the buttons? I've had mice where it happens after 12+ months of major use, but not
Universal Skate Compatible Feet
You’ve already got the bottom of the mouse ready for a really cool feature! Hot swappable feet with different universal skates. imagine every customer buying a four pack of feet that would be optimized for universal skates like x-raypad jades or obsidians.
Is it possible to configure the PenPoint so that tilting the mouse left or right triggers the left/right arrow keyboard keys?
Is it possible to configure the PenPoint so that tilting the mouse left or right triggers the left/right arrow keyboard keys?
Winsows 10 to 11. Can't load my backup file.
Hi, i went to Windows 11 and installed the swiftpoint app. I made a backup a few months back but I can't upload it. Do I have to remap everything, or is there a way to load the backup into the app? Thanks
Mouse tracking consistent lag/slowness with ProPoint Mouse
I and my 20 other friends had each bought several Swiftpoint ProPoint mouses recently and we are all using Windows 24H2 Professional Edition Build 26100.3476 on various make/model laptops and using Windows P3 Control Panel v3.6.4.0 which is basically
Double Click/Roll?
I REALLY want to be able to use the roll feature in things like Unity for switching before input types, but the mouse is easy enough to roll when moving I want to be able to double-roll to activate to make sure it's an intentional act. I don't see anything
Configurable Axis Offset
Does the software have an adjustment to set the orientation of the main sensor orientation? If not, it should. The mouse is large and heavy, which means I hold it a little different. It would be nice if I could input a positive or negative number to adjust
Lag In Mouse Movement
After @5 Years, I Think My Z1 Is Failing. The LED Doesn't Work (Which Is A Moot Issue For Me). I Can't Get The Tilt Feature To Work. Now The Mouse Has Developed A Noticeable Lag. Is There Something I Am Missing? It's Been The Best Mouse I've Owned. But
Custom Images/Animations on OLED
Would be nice to upload custom images and animations to the oled.
Button setup
Is there a way to make it so my left mouse button doesn't actuate until I release it on the Z2? Like when using a sniper rifle in PUBG. Also, could I program the fire button to be able to switch between a regular button press, and one that actuates upon
Gyro visuals to show tilt and noise zones
It would be very nice to see live feed back in the app to show your current tilt angle and degrees as well as where you have your trigger settings and noise settings at. It would make setting up the advance tilt settings much easier instead of trial and
mouse gaming feet
What is the best mouse pad for the Z2? My Z2 moves like a brick. Lots of drag. Is there a better pad. The one I use no is a material pad.
Z2 display stopped working
The display screen on my Z2 has stop working. It does not respond with the rear and edge mapping buttons, to change profiles. ive attempted to unplug and plug back in but nothing i do seems to work. I ordered the Z2 on 12/15/2024 Thanks for the help.
money back guarantee return shipping
does the money back guarantee offer free shipping to return the item/refund the shipping price
xbox
how do i setup to use with xbox
Beamng mapping: throttle
I’ve had the Z2 since release and have been very happy with it so far. Until now however, I have under-utilized its impressive capabilities. I’m currently working through my first genuine attempt at using swiftpoint’s x1 software for mapping BeamNG controls
MacOS profile switcher based on window title
Making this into a topic since the API thread wont let me post it for some reason :) I made a small applescript that checks to see if a particular window title is open on mac, and if so, switches to that profile, then it waits to ensure that window is
Pressed mouse buttons release on Profile Switch
Unsure if this (as i consider an issue/bug) is also present in the latest non-beta. I use Automatic Profile Switching, which is what made me realize the issue. This happens e.g when left clicking and holding from an active application bound to a profile,
Can the tilt feature be disabled while the mouse is lifted from the surface?
I find that each time I pan my camera in game I end up tilting a bunch unintentionally. I'd like to mitigate if possible.
When I hold right click the left click isn't registered.
As said in the title when i hold the right click and try to press left click its not registered (Essentially I can't use the scope), I also tested it with the button tester profile and its blinking but its hard to tell if it actually works.
Dota 2
Hello, Has anyone configured this mouse for Dota 2? I can't seem to make it work. Whenever I assign a function to the control panel, it does another action game. For instance, Instead of using an ability, it controls the camera. Thanks.
It does not make me move files or images to another program
Greetings I have a problem as an Explorer click on an image to move it and when I go to another "photoshop" program, the dragging is canceled. This thing happens to me for any file and program, practically does not drag anything into any other program.
Profile for Escape from Tarkov
Is there a profile for EFT? I just received my Z2 today and I really don't even know where to start with making a profile for this game. I've tried to assign my tilt feature to lean in which it doesn't work in game. If there's anyone that can share a
Profile For Tarkov
Is there a profile for escape from tarkov? cant find one and im not good enough to make one. Could anyone make one?
Difference between Z1 and Z2
Hello I am glad the Z2 is coming out because it reassures that my Z1 is not abandonware, but I wanted to ask what is new in the Z2 besides a new sensor? Is the only difference really just the sensor? I was hoping there might be a new Joystick mode that
My mouse has a lot of give before the button actually gets pressed on the left button.
I created a topic before but I'm not sure if anyone saw it as I think it got deleted. But whenever I click the left click on my Swiftpoint Z2, It has way too much of a gap before the actual button is pressed and It sometimes double clicks if I tap the
Is it possible to either regular click OR deep click, not both?
I'm trying to use regular click and deep click as two separate actions, not chained actions. 1) regular click presses A 2) deep click presses B I want to press either A or B, not always A then B when deep clicking. Is there a way to set this up in Expert
Is it possible to save a macro?
I have a combination of keys, let's say 1,2,3,4,5. I want to have this saved into a macro/group so I can use it interchangeably across different profiles or different buttons. Is this possible? I'm not seeing where I can save a combination of presses.
Right botton when hold, ⌘/Command & when press right click.
I'm starting and I would like to know if I can do this, Right botton when hold, ⌘/Command & when press right click. Thanks.
ARMA Reforger flight?/
Hi! im attempting to bind the joystick gyro function to my pitch and roll in game. i was able to set up the analog joystick and have it work properly in the gamepad and controller tester online, but in game it doesn't register any inputs. im grateful
Config Mode?
I have seen several references to a Config mode, someone said the mouse wouldn't switch profiles when in Config mode. But I cant find anything explaining what config mode is or what it is for. I think I understand that it is activated when tilt hits 25
Next Page