Uploaded Profiles
Hi, I recall there previously being shared profiles for specific games on the forum you could download but I can no longer them? Looking for profiles for World of Warcraft or Lost Ark if anyone has any. There was definitely some profile for binding your
scrolling feature
is there any possible way to have 'up' and 'down' scroll remember last command to be able to cycle through a set of shared commands?? the app im using doesnt support this feature.
"Repeat From" outputs "Times" value reset to 0 when its output list is viewed.
Steps to reproduce: Add a "Repeat From" output to any mapping. Set its "Times" attribute to any non-zero number. Save settings. Switch view to any other profile, then back to the profile with the "Repeat From" output. Its loop counter should still be
Repeat From Bug
I had some weird behavior before when I edited a button that looped a certain amount of times only to change back to infinite looping when i clicked to inspect it. I finally figured out tonight what was going was a bug that only occurred when i swapped
Exclusion list for app-switching
please add an exclusion or delay because i cant use this software with rewasd.
How do I make the Swiftpoint Z act like a joystick when titling the mouse?
With my Swiftpoint Z I have tried a few different games that I prefer to use a controller for movement over mouse/keyboard. However, the games are not recognizing me tilting the mouse as any kind of input. Is there a setting I need to change on the mouse
how can have a profile
hi where we can see the game customs profile or we can found it can any one show me about that ??
Adding Xinput support to the Z
Just a small question here, I saw in a previous post that Xinput support was "planned at the beginning, but didn't make the cut and will be planned to be implemented in a future update down the road" or something along the lines of this. Is this true
Automatic Button Up Prompts
It would make configuring maps so much easier if I didn't have to repeat every command input twice for buttons I want to map a Press and Release binding for. Can we get an auto-close prompt on selection of Press on On Press mappings? This would be similar
Faster Mapping Navigation
I'd love to see some updates to enable faster navigation of the expert mode mapping sections of the X1 Control Panel. This could include: Better Tabbing (or Arrow Key support) Tab cursor is difficult to see (invisible for dropdowns). When on the Button
What's an Output Group
I'm new to the X1 Control panel (had the old Z control panel installed). What's an output group? Does it allow for tagging/transfer of assignments between buttons? Or, does it simply serve as a description for the user? I'm struggling to get the text
Auto-fire macro for jumping in halo?
Hi, How would I configure the RMB that when pressed, will jump repeatedly until I let go of RMB? I can already map space bar to the deep click but cannot figure out how to keep it constant.
Cannot Link Profile Switching to "Windows Apps" Games
I've tried changing the ownership and permissions to read the files in the "protected" windows apps files and even though I can access them, the X1 control panel cannot. Even when I run it as admin. I am able to navigate to the folders but when I try
How to add Microsoft Store/XBox Game Pass Games
Recently I've joined XBox Game Pass, which I love, and it's representing more and more of the games I play on my PC. Unfortunately, there seems to be no way to add Game Pass (or any Microsoft Store-originated) games, since there's no way for the user
Press [Press and Hold Down] command not "holding"
Hey all, I've recently tried to recreate some commands for an "auto run" function to help alleviate my carpel tunnel when playing games that require me told Shift + W. I have to physically hold down the button to get it to hold. Tried different buttons,
Swiftpoint X1 Control Panel not working
I've tried uninstalling and reinstalling, restarting my computer and changing install location, however the software will not start.
disabling auto update
I would like to find out if there is a way to stop the auto updates. I will manage checking and updating software. I would prefer not to have to resort to firewalling the software in, but will if its the only way.
Button dimensions
I was wondering if you could provide the exact dimensions of the right mouse button and the left mouse button to make custom griptapes.
Forum functionality
Would it be possible to upvote comments? If a thread is really long, being able to sort the replies by votes would be nice. In the profile of users on the forum, you gain exp by engagement, upvotes on comments do not need to be weighed as heavily as a
Where can I find the 16 pre made profiles for gaming?
The page for the Swiftpoint Z says: "The Swiftpoint Z supports all software and games, and comes with 16 pre-made profiles for some of the leading titles in gaming." Where can I find these profiles? Pre-made profiles include: Apex Legends, Borderlands
Sharing profiles
I got the SwiftPoint Z mouse, still getting used to it, but so far love it. A question is why there are no pre-made profiles, everything need to be manually setup. Why cannot put online other people's profiles / games, so that can be easily downloaded?
Import doubles bindings
I noticed today: when I import a saved profile, on one of the mappings, it doubles every keybinding, so I have lmb bound twice, rmb twice and so on
Marco to press both mouse buttons
I just got my Swiftpoint Z and I'm really liking it. I'm struggling to figure out how to configure a macro to simultaneously press RMB and LMB. Is this possible?
Bug in Text String output action
Hi there, i might have found a bug with the output action "Text String". The string which should be entered is (1): KCi{]ar-4eL;TicG9+k9 Actually it writes (2): KCiÜ+arß4eLöTicG9`k9 (just written with the action) I guess its because i have a german keyboard
How can I use one input to modify the function of another input?
Hi there, are there anywhere other sites with more examples or tutorials? I am new to the Z and I find it difficult to assign the buttons if you have special needs :) I am a software developer so I am used to google and find stuff out on my own but this
JSON script reference
I'm trying to construct a complex macro that involves moving the mouse a predefined number of times and am wondering if this could be accomplished by hand coding the macro? In the mappings option I do not see a action for moving the mouse at all. Basically
What directory are profiles saved to?
Something is wrong with Swiftpoint X1 Control Panel and it will not launch. If I had to guess it became corrupted by an unstable overclock. I want to reinstall everything, but I want to backup my profiles first. I don't know what directory my profiles
The next software update
Hello, I was just wondering if you would know about the next update coming to the x1 control panel. A couple posts back I saw that you mentioned something about the next update and was wondering if that is happening anytime soon? Does this in any way
X1 not auto switching properly with tracer
I recently purchased a tracer and a second z and upgraded to the x1 software and have had nothing but issues with profile auto switching. X1 is ran as admin and when I enter a game I usually have to tab out and back in 1-3 times for it to kick on as well
Isolate Deep press?
Is the a way to perform the deep press function without triggering the primary function before it?
Swiftpoint Z X1 Control Panel auto detect doesn't see Star Citizen
Recently my middle mouse button stopped working. In the course of trouble shooting it I deleted my profiles and switched from the old software to the X1 control panel. The sensor cleaned and mouse reassembled I am now trying to add my profiles back in
Swiftpoint X1 won't "start" with windows (10)
Hello there! I've been enjoying this mice for the last week ^^ (Swift-point Z) But I've been dealing with this issue that, every time I restart the computer, the program doesn't start, and because of this, I don't have the "switch profiles automatically"
Swiftpoint X1 Control Panel Beta Testing
If you'd like to be involved in testing beta versions of the software for our Professional Range mice check the thread linked below for more details (Community account required)
Display the Z mouse in real time in Simple Mode
What I mean by this is, have a distinct Z/TRACER replica model in the simple mode version of the software, that clearly displays and previews things in real time like the deep click force levels and vibration strength through a gauge rather than a percentage.
Ability to add random delay
It would be quite neat, if you could add a random delay as in wait something in between 5 and 10 ms.
More Supported Game Mappings
We need more Official Mappings in the software. I've been hoping to see the games below get supported (And with support for Tilt Controls) Zero Hour Elite Dangerous Black Desert Online Tarkov Enlisted Squad
An (optional) Introscreen on startup
By this, I mean for the sake of clarification, less digging through into individual pop ups, and effectively telegraphing these sections that may go unnoticed to the users. Have an optional introscreen on startup, that could say display sub panel categories all
Bringing more features to Simple Mode
Hey I absolutely adore the Z mouse (did an in-depth review video on it on YT actually), and I wanted to offer some suggestions that I think would make the X1 control panel more efficient, transparent, and convenient for users. Have the option to make
Export profiles from mouse memory
I just got a new pc and no longer have access to the old one. I saved all my profiles to my mouse beforehand and they work fine on the new pc but i cannot use the configuration software to edit any of them or add new ones because they dont show up in
More Customization
Over the time I've been using the X1 Control Panel, I've had multiple suggestions. Tilt Mapping support (Add it to the Simple Mode) Copy & Paste support for Mappings (In Simple Mode) More OLED Screen Customization: We need the ability to add our own Images
Next Page