Swiftpoint Z2 losing gyro after windows sleep
I've narrowed down the cause to probably this reason. After a few windows sleep and wake up cycles, the gyro stops being detected. I haven't been able to find a solution to this and the last post that had this problem said there would be a firmware update
How to disable Dinput
I activated DInput for the Gyro once to test using it for racing and flight sim games. But afterwards it has always been on and seen by steam as a controller. Even when the Joystick Output setting is disabled. The problem is that it messes with a bunch
Recalibration for Z's Deep Click Sensor
My Swiftpoint Z could not precept its all 5 pressure sensitive buttons correctly, when I press them, they just cannot reach Force 100%. I also didn't find any way to recalibrate it neither in mouse's user guide nor X1 control panel. By the way, where's
Z3 Design
Hello, I am already very excited about the Switchpoint Z3. I currently use the Roccat Tyon, which I think is the best gaming mouse I have ever had. Unfortunately, it is slowly reaching the end of its lifespan. So I need to look for a new one, and that's
Arc Raiders Profile
Does anyone here have a profile for arc raiders? I am new to mouse and trying to figure out everything.
A "Gamepad Tester" within Simple Mode
This would be kind of similar to how the application 'switch hitter' works for keyboards. Think of it as a troubleshooting tool, that displays a live preview of the mouse indicating whether it is working as it should be; outputting the correct keys, mappings
Some feedback for the Z2 and ideas for the Z3 (needs a stick and 4 buttons on the thumb side)
So I've been daily-driving the Z2 for about a couple of months, seeing if it could replace my old Razer Naga Trinity, and while I do like it and I'm happy enough with it to use it long-term, there are issues and areas to improve. Firstly, not enough thumb
Superclick for Z3?
Hey team, I'm very excited to see the launch of Z3. Would it be possible to include this functionality in the mouse? Those aren't mechanical switches for the clicks. https://www.logitechg.com/en-eu/shop/p/pro-x2-superstrike-mouse.910-007777
Folder based application linking
I consider myself a power user of the Z-Series mouse at this point, I've got a general purpose profile with a tilt alt, profiles for VSCode, Fusion 360, and do a lot of variety gaming where things like I, M, F5, F9, Ctrl, Alt, etc. are very common so
A keyboard please
I Look down see my mouse, dirty rubberised corsair dark claw and I feel hatred. I see the Z2 on an LTT video. I come here and see a z3 coming soon, happiness. I look back down and see my 60% keyboard and azeron gamepad. I wish I could make them kith.
Features Wishlist
Probably late for this to be in the Z3 but here's what I hope for in a possible Z4 if it undergoes a major update Better repairability + Easier disassembly - Screw-less and modular design: like in ASUS Chakram, the left and right buttons are separate
Gestures and Gesture Clicking
I just got a creator and love it. I previously used an MX Master. There's just one function I had with the Logi that I've been unable to replicate, and I feel like it should be possible but I'm missing something. I would like to use the thumb button to
Allow stoping a specific loop instead of all loops
Hey, i have multiple loops, for example one that presses E every 10 sec and one that presses X ever 36 sec. i want them to run while i use the auto clicker macro.. but the macro is Press: (Left Click | loop 0 Times) and Release (Stop All loops) the problem
The upcoming Z3
Man upcoming products are always the stuff of dreams I was about to pick up the z2 now that my preffered doom mouse (roccat nyth) loved my shark fin for 'nades and 'nade switching, I had middle mouse as melee and I used the side with a 4 in a row, two
Thumb button push to talk on Discord
I mapped the bottom thumb button to the ALT Left on keyboard so i can push to talk on Discord but it is not working...
Z3 = Z2 + Add 9-12 extra buttons for thumb
Hi, I like to keep my left hand free and only use my thumb if possible. I also use a special ergonomic keyboard which makes half the keys separate. I'd love to have add an extra 9 or 12 programmable buttons for my right hand thumb to: switch weapons (1-4),
Swiftpoint X1 Control Panel Does not Save any Profiles to Z2 Flash Memory
Whenever I turn on my PC, I have the Swiftpoint software set to auto startup but the software does not auto-start. This then causes the issue that my profiles are not auto-switching when changing programs. The mouse memory is at 16% when I have two profiles
Custom Images/Animations on OLED
Would be nice to upload custom images and animations to the oled.
Any chance we coud get STL files for the shell of the Z?
I have become a claw grip user since buying this mouse and I can't help but feel hamstrung by the left side of the back being so close to palm's thumb muscles. When switching from arm to wrist aiming on low sens and anchoring to the mouse pad with the
Double Click Support + Overriding Other Button Presses
Hello, I just got my Z2 and been experimenting with it. I had a question regarding implementing double click and triple clicks of buttons to trigger different functionalities, that I couldn't find info online on. I wanted to implement a functionality
Conditionary Tilt
Is there a way to set a condition for the mouse tilt? For instance i've been setting up a profile for stalker 2, and depending how sensitive i set the mouse tilt and the player lean function, when i'm not aiming down sights it seems it seems more sensitive,
How to change Tap's response in the macro
Currently, I have a simple macro that spam a few keys like: 1. Tap 1 key 2. Wait 100ms 3. Tap 1 key 4. Wait 100ms 5. Tap 1 key. Similarly, I have the same macro on Razer Synapse. I did the scan rate test and I noticed that on my Z2's macro, the tap's
Is it possible to do loop within loop?
I just got my Swiftpoint Z2 and it's a huge learning curve for me at the moment, but I love it! Coming from Razer Synapse's macro, I always was able to do loop within loop, like: - Start loop: 2 times - Tap 1 key - Start loop: 3 times - Tap 2 key - End
Mouse wheel broken?
Hello, i bought a swiftpoint z2 about 3 or 4 months ago, and just today my mouse wheel is "free spinning*" (it wasn't doing that yesterday) I can't hear the small clicketing sound that it usually does when scrolling, button works perfectly fine, scrolling
Left handed Z3?ars
I lost my right arm 33 years ago so I have only my left arm useable for my mouse. Is there going to be a left handed version of the Z3?
Mouse will go into config mode when on glass mouse pad moving at high speed
When moving my mouse back and forth in long lengths, causes the mouse to vibrate and go into config mode and out really quickly. Has anyone else witnessed this issue. The fix I did was disable anything that was on any tilt function in the expert mode.
How can I make a sniper button
I'm wanting to set a custom dpi based on clicking a button. Effectively a sniper button. How would I accomplish that?
Mouse tracking consistent lag/slowness with ProPoint Mouse
I and my 20 other friends had each bought several Swiftpoint ProPoint mouses recently and we are all using Windows 24H2 Professional Edition Build 26100.3476 on various make/model laptops and using Windows P3 Control Panel v3.6.4.0 which is basically
tap vs press and hold
Hello, is it possible to make a button do different actions depending on whether the button is held or tapped? for example I want mouse 4 to have its default use when quickly pressed but when pressed and held it would be a key stroke (ALT in my case).
Multiple deepclick buttons NOT acting as different analog sliders
i have a Z2 and I'm trying to configure 2 deepclick buttons as analog throttle and brake for racing sim games, and since Xinput is still not supported i'm using X360CE. However, even though the mouse has 4 different buttons with this feature, they all
Windows in decline, Linux on the Rise
There are no concrete numbers or way to track how many people are moving to Linux from Windows but one Distro reported an increase of 780,000 downloads last month. (I was one of them) and I dont think anyone can or would argue that now more than anytime
Is it possible to use the pressure clicking for sculpting in Blender?
It would be amazing for 3d sculpting if I could use my mouse for pressure sensitivity instead of a tablet. I'm not sure if you'd have to emulate pen input pressure for windows, or directly communicate with the Blender software. I'm tempted to purchase
Have the LED are in the palm of the Z2 or its replacement we slightly warm
Why? Universal ergonomic orientation. When you feel the warmth on that particular part of your palm, then you know your hand is on the mouse "just so" , your personal, exact position that you prefer in order to maximize the ergonomics and reaching of
SwiftPoint Control Panel not detecting game to switch profile - STALKER GAMMA
Hello, I can't get the SwiftPoint X1 Control Panel to detect a particular game I've been playing. I recently started playing the free mod STALKER Gamma available on GOG.com (https://www.gog.com/en/game/stalker_gamma). The mod is... a complicated three-legged
Scripting or ability to add random wait times in macros
Hi I was eyeing up the Z2 as a replacement for my Logitech G502 + Just wanted to know the options i have for either writing scripts like the Logitech LUA scripting or the ability to add random wait times into macros ? Thanks
Swiftpoint Z2 bricked
Hi everyone, after updating the x1 software and then upgrading the Z2, the mouse bricked. It gave me an "upgrade failed" message and now it won't even turn on anymore. I've tried all the basic solutions, I hope someone can help me.
Hold on first press, release on second?
Is there a way to make it so that I can press a button, for example, Mouse 4, and on first press it then presses and holds a keyboard character key, again for example "x". I want to then be able to press that same mouse 4 button to release the held "x"
Swiftpoint Z2 is cycling between connected and disconnect
recently received my z2 and when I plugged it in the x1 control panel wanted me to update the firmware and when I did it "finished" updating the firmware and then the mouse wouldn't move and started disconnecting and reconnecting. Ive tried plugging it
Can't choose an address in Japan while checking out
I'd like to get a new one because my 5-year-old propoint mouse is almost dying... But I can't choose my address in your shopping cart, which said "invalid address". Japan is listed on your shipping policy page. Is it true? https://www.swiftpoint.com/policies/shipping-policy
One button changing another?
I was wondering if there is a way to make it so that when I am holding my right click, the left click has a short delay before activation, but is normal with no delay when I release the right click. Does that make sense?
Next Page