PRO Slide cancel COD Warzone - Vanguard...
Hi I was creating a profile for my Swiftpoint Z and I was looking how to get a "Slide cancel" in one click for a better movility and I found a amazing setting for get it in the "Botton thumb" and it helps to be faster, a lot. Is somebody interesting
Launch Application Macro Not Possible?
Migrated over from a G502x LightSpeed Plus to this beauty and loving it so far. Been able to eke out much more programming from multiple 'G-Shift' profiles. The one thing that I'm stumped on is, can you really not launch applications or open file locations
Feature request for a way to toggle mappings on/off in X1 control panel
I have a couple of feature requests for the X1 control panel. The first is an option to disable any mapping that I've created, so that the software acts as though I never added it (meaning it defaults to "Do Nothing" or falls through to the parent profile,
Anti cheat is detecting swiftpoint software as invasive. Does the program detection run constantly?
Hello, I play games with strict anti-cheat like playerunknown's battlegrounds on PC; and one of the programs in question is the swiftpoint Z X1 control software itself, as I'm checking there is no way to turn off the polling for running programs, unless
Mouse switches
Does it possible replace mouse switch on Swiftpoint Z?
Changing a mapping in a subprofile modifies the parent's mapping and vice versa
I am using a Z2 mouse with driver 3.0.7.0. I use the X1 control panel in expert mode. I have a general profile for all programs, let's call it A. I have a particular program in which I want to change one of A's mappings to something else, while keeping
HyprZwitch - a little script daemon for profile changes on Hyprland
From the granted wish for an API a little project was born: HyprZwitch A Hyprland IPC observer to switch mouse profiles on the Swiftpoint Z series using the new x1cp API. So in case there are any fellow Hyprland users wanting to check it out, you may
Double alternate
So it seems that having two alternates on the same keybind doesn't seem to work. I tried binding an alternate with 2 alternate value with the proceeding commands as lb1 down and lb2 up. Then after that adding the same thing but with the down and up switched.
Scroll notch missed when changing scroll direction.
Hi I have had an issue regarding the scroll wheel of the Swiftpoint Z Sometimes, the scroll wheel just does nothing, let me explain. Let's say I'm scrolling down, the context doesn't matter, it can be on a web page, on Discord, in a game. If I want to
Cable / macos sonoma support
Hello, I have read some reviews of this mouse and they list the weight without the cable...does that mean the cable is removable? In this transition time with many laptops having only USB-C ports, it would be nice if I could switch between USB-A and -C
swiftpoint z buttons not responding
my middle mouse buton and button 4 and 5 are not registering on windows 11 i have reset the mouse and uninstalled, reinstalled software
Is USB 3.0 required for the Z?
Traveling on short notice I just toss my Z2 in my back back and got going. then didnt even open my laptop for 2 days and when I did it wanted a windows up which I did, and now my Z2 wont connect. but i think at home it was plugged into the dock USB3.0,
Mouse only works with Driver not X1
After having the device freeze during a Firmware update, I followed several forum topics to eventually reverting and recovering it to the old Swiftpoint Driver 1.2.56. Then deleting this and going back to X1 software the device again is unable to connect
Macro Setup Mouse Movement
I'm trying to add a macro for one of my games whilst using complex mode and I added the movement macro with the coordinates of the screen where I would like my cursor to go. However, it doesn't set the cursor position to the coordinates but instead adds
Pivot without parent Settings for Z2?
Tried adding the pivot with out parent code to on of my profiles and cant see to get it to work. when i try to reimport the file it has no name and can not be select. has anyone else tried this with the z2 thanks
Z2 - Does the sensor sleep if idle?
Running into a consistent quirk: after my Z2 is idle for a few minutes, it seems like the sensor goes into some sort of sleep mode. When I move the mouse after leaving it sit for a while, there's about a 1 second delay before the sensor tracks mouse movements
Implicit delay between inputs
I made a macro that spams the left mouse button as fast as possible, and I compared it to the same macro I had on my old mouse (Logitech Gaming Software). These are the results: - Swiftpoint X1: 167 clicks per second - Logitech Gaming Software: 999 clicks
Auto backup on "major changes" to a profile
so, real short and sweet... I just unwittingly deleted my heavily customised primary "desktop" profile. >.< "Expert Mode" FTW. looking through my "Documents" location (Windows user, if that matters), I see the "Swiftpoint X1 Settings" folder already has
Z1 - wheel scrolling *way* too fast
I've had the Z1 since the kickstarter and now have multiple Z1 and a Z2. Am currently at a client site with my laptop and a Z1 and the mouse wheel has started scrolling way too fast... a single movement of the scroll wheel will zoom the browser page right
Transfer of ergopoint control
My assistant and I both have Ergoppoints, which we find awesome. A couple of times now though we've found that my mouse is working on / controlling her device and hers is doing the same on mine even though our respective mice are about 2 meters away from
Finger Tip Button cap/replacement!
Recently I discovered this thing called YouTube (yes really) so now daily if can see how stupid i am. anyway just watched a video that shows the finger tip butt caps can also be used to replace the standard fingertip buttons. and if you have bigger hands
Unable to setup a Keyboard action before click in one macro
Hello everyone, I am working in AutoCAD and have about 800 arcs I need to draw. the sequence is Keyboard A (Arc tool) Keyboard Enter (Activates the arc tool Mouse Left click (Start point of the arc) Keyboard E (Option for next click to be the end of the
Mouse 1 and Mouse 2 height mod (increased ease of use)
The mouse's learning curve and ease of use was greatly reduced when I added adhesive rubber bumper stops for cupboards. I cut one of these things in half and stuck them on top of Mouse buttons 1 and 2 and now all of my mouse buttons have the same height,
Swiftpoint Z 1st Gen random "Exit Config" and buzzing after recent firmware upgrade
Hi there! I have probably 4 Swiftpoint Z (1st gen) mice that I use daily as a radiologist for reading exams. They've been rock solid aside from the middle click issue which is a known thing. However, since I upgraded to the most recent firmware (have
How do I stop the auto-click behavior in the Mac version?
I am using the Mac version and when I install the swiftpoint driver, it automatically clicks on the top of the open window in most applications. In the Finder.app, it will select the first file or folder on its own. I would like to stop this behavior.
Windows P3 Control Panel - Label issue
I am running Windows 11 and there is a issue with Windows P3 Control Panel v3.6.3.0 which is not in the earlier versions. Basically, every once in awhile, the label which is defined as the same thing one gets when the mouse pointer is placed on top of
Coding profiles
Are there any profiles pre built for jetbrains rider or webstorm?
Swiftpoint Z2 is cycling between connected and disconnect
recently received my z2 and when I plugged it in the x1 control panel wanted me to update the firmware and when I did it "finished" updating the firmware and then the mouse wouldn't move and started disconnecting and reconnecting. Ive tried plugging it
X1 Control Panel: Transferring custom Windows profiles to Linux
Hey! First time posting here. I'm currently in the process of switching from Windows to Linux. I'm still dualbooting over separate SSD's until I can set everything up correctly, which brings me to why I'm asking this. Recently, I found out about the X1
Help me make gyroscope work ?
So, I bought the mouse Z2, and I wanna play Batman Arkham knight with it, specifically driving the batmobile using the gyroscopes. I customized the left lean to be the "A" , right lean to be the "S", front lean to be "W " , back lean to be "S", But still
Undo function in X1 Control Panel
Possibly this exists and I can't find it, but I would really appreciate an undo function in the control panel. i spent time making a mildly elaborate key mapping and then misclicked and overwrote it. And when I tried exiting without saving it saved anyway,
Raise lift Off Height beyond max?
Is there a way to raise the max lift of a bit more? I already set the lift of height: max in expert settings. On my old Z i was using ceramic mouse feet, but if i use them on my new Z2 the sensor stops working, since the mouse is a bit to far away from
Rumble effect on my Swiftpoint Z.
I just started using the rumble feedback on my Z especially on the knuckle buttons. I noticed it goes to 100 on yellow and then up to 120 on red. Is there any side effects to using the full 120? I love using the strong rumble on the when playing my games
Where to upload profiles?
I would simply like to ask if anyone could help me find where to upload profiles cause I have been to the swiftpoint community files site and seemingly I cannot make an account to sign in and upload it there. Does it have something to do with the forum
Auto Profile Switching not recognizing Sketchup Pro
I cant get the Auto Swittching to recognize Sketchup Pro 2021 (this is the desktop software installed on my computer with .exe file not the web version) I think it was at some point, but I am not 100% sure that is true. curious if anyone else has issue
Swiftpoint Z tilt back activating randomly
I have an issue where the Swiftpoint Z will think it's tilted back all the way randomly. I have the mouse programmed to flash a custom message on the OLED screen, and change the scroll wheel to shift through songs when tilted backwards 17 degrees, and
Finger Tip Buttons pulling out very easy
Ok. so I admit that the first night I had my Creator I knocked it off my desk and it fell on the floor and the left fingertip button fell out. I put it back and have had no problems other that it seems to lift out very easy. but i figured it was my fault
How do I make Z2 profiles available from memory? (for use on a different PC or Mac)
Hi I received my Z2. After playing around for a few hours, I could not get the profiles to work from memory. When I switch to memory, it defaults to Desktop 1200 DPI. I have set a custom profile, renamed it, and saved it in memory more than ten times
X1 via Package Managers (WinGet/Chocolatey/Homebrew)
Is the X1 Control Panel available through any command line package managers? I am using my Z2 on both Windows and macOS systems, which I manage software installations through package managers, so having X1 available through any of these would be great:
Use ProPoint like a mouse in presenter mode
I have a ProPoint. I was using it in Windows as I intended where I could use it like an "air mouse" while using a projector. I'm specifically referring to the ability to click the left mouse button and drag, double click, etc. I've switched to MacOS.
Next Page