Z2 can't left click after setting Deep Click
I tried setting the pressure thing and now it doesn’t left click and I got it to do the reset but it didn’t work. Mouse is unfortunately useless now. How do I fix it?
Gameplay Haptic Feedback Idea
Hi! Is it possible to get haptic feedback vibrations from gameplay? For example when playing Fortnite on controller if I get shot I will feel the haptic feedback. Of course this could wear down the haptic motor. I’d run it on lower s settings
A very simple solution to the movement resistance issues (probably should be in the instructions).
I didn't see any instructions for it, but you have to remove the thin plastic films on all of the surfaces on the bottom of your mouse that come in contact with your mousepad. It's not obvious just by looking at it, as there aren't any tabs to facilitate
[Linux] Auto Long Press Click not working
Hi ! I'm trying to configure an Auto-Click on a button on my Z2 and I can't get it to work... I can't configure it. (short auto-click works) Here is my 'script' for my long auto click. Long Auto Click Where is the problem please?
Pen grip on non-smooth laptop surface
Is there a recommended way to use a ProPoint on the empty space on a laptop (i.e. to the right of the touchpad) when this area isn't smooth (it's hard to move the mouse across this surface)? I've had a number of pen grip mice, and the old ones came with
Translations
I just realized that if you wanted to add more translations to the control panel, you could technically make the translation files open source and let the community help with that. I for example could and would like to add a translation for german (maybe
Are Z2, Creator, Tracker Profiles interchangeable?
I might have messed up. Loved the Creator I Bought 2 weeks ago so when I saw the opportunity to buy a Z2 I couldn't pass it up (one for work, one for home) so I saved my profile data to the Creator and to a file on my computer and unplugged my creator
Z2 Fingertip buttons are too large
I had a Z1 and they were small rubber affairs, much more discreet. The Z2 fingertip buttons are I'm sure trying to be helpful but I keep fouling them all the time and the paddles extend quite far forward. My wife has smaller fingers and was experiencing
Z2, Only Edge buttons working
Just got my Z2 a few days ago; I love this mouse and everything has worked fine until now. Stepped away from my computer for a few hours but when I got back none of the buttons on the mouse worked with the exception of the profile switcher and screenshot-bound
Running a macro within a TILT range.
For example: Tilt Right 1.2 between 2.4 degrees > OLED Scroll Wheel Push > VOLUME UP Scroll Wheel Pull > VOLUME DOWN Tilt Right 1.2 between 2.4 degrees Return > Previous OLED So slightly tilting the mouse the volume can be adjusted but this
Cursor jump across different monitors
Hey there! I received my Z2 and it's been amazing so far :) I have a suggestion for us multi monitor users, I was wondering whether it would be possible to add an option to move the cursor to the different monitors that you have, maybe similar to how
Tilt Activating immediately despite angle setting
On my Z2, trying to map right tilt to a single keypress and it activates with very little tilt no matter what I set the angle to. What setting am I missing? Thanks.
Z2 not detected when returning from sleep
New Win 11 install. Changed Z1 for Z2 when it arrived. All seemed to be working just fine but mouse is not detected by X1 software after resuming windows from sleep. Cursor is still working but buttons do not register and logo light is off. Disconnecting
USB Receiver TYPE-C
I want to connect the receiver directly to USB-C I think many people are thinking the same thing. Please sell it
New 3.0.5.0 settings "Show output list in second column" and "Show Press & Release output lists" not working?
Just checking to see if the new changes: Added option to display output action list side by side with their mapping. Added option to display an inputs Press and Release output lists simultaneously. This also allows outputs to be dragged between the press/release
Controller input not detected
I struggle to get controller input detected by external software or games. Windows joycpl also doesn't seem to detect any buttons or sticks, not sure if it ever did or should tho.
Option for Mouse Actions to Block Further Outputs Before Button Release
Hi, I have an idea - give us a checkbox or Output Action to block further outputs if an action is triggered after the button press and before the button release. Here's what I mean: I want to be able to copy, paste, highlight, and cut by holding the bottom
Mouse movement remapping improvements
I often play strategy games or moba like top-down games where character movement and camera movement is bound to mouse. Click to move and move cursor to screen edge to move camera. I own Azeron which has thumb-joystick that i can no longer game without.
X1 Control Panel via Remote Desktop?
Is anyone an expert in with Windows Remote Desktop remote desktop Settings and the use of and advanced mouse application? The Creator and X1 Control Panel installed on my home computer (lenovo thinkpad Win10) and remote desktop connected to work computer
How using Tilt/Roll in War Thunder ???
The question is simple.. but i don't know what to map on X1 Control Panel to be able to use Tilt/Roll with Helicopter in War Thunder. Is someone can help me... (i'm using Linux) but Z2 working Well here... Second question : how to map "Deep Click" without
CTRL + left click with Creator
There is reference to CTRL+Left Click in the FAQ for the Z starter mappings but I havnt been about to figure out how to do this with the creator
How to create Macros with Creator?
Breaking out in a cold sweat wondering if I just spent the last 3 hours learning and falling in love with something that isnt going to work. I have come across a few references to Macros. I know the Z has it (they are just impossible to get) and 3 years
Disable haptic feedback on X1 Control Panel connect
Hi, I use my Swiftpoint Z on a switchbox and also ordered a new Z2 which is now on the way to me. From your Updates I learned that I have to update my Swiftpoint X1 Control Panel app to prevent it trying to downgrade the firmware of the Z2. I was previously
Problem updating Firmware on Z1 [already solved]
After updating X1 to 3.0.5.0, I was invited to update the firmware on my Z1. Unfortunately, the firmware update just sat there fore over 10 minutes (and the mouse still worked) so I killed the X1 control panel and restarted it. This condition persisted
Mouse Movement Mouse Pointer.
I am just testing and experimenting with the features on my Z . I saw one of the features as pictured. I can't seem to find it or enable it - I wanted to see what I could do with it. All I see is Mouse Movement - which assigns an action. I am using expert
Key event down/up should default to mouse button press/release respectvely if only one key is pressed during the Record Keystrokes feature
This is my biggest gripe with the advanced mode and has been since years before simple mode existed. This what I input manually over 99% of the time and there are way too may steps involved that don't have to be there. This is so important because games
Does X1 support "pan" gestures?
I've been using a Logitech mouse for years and I'm excited to switch to a Swiftpoint Z. One of the features I use on the logitech mouse all the time is the ability to "pan" throughout a window (Logi calls it "pan" under their gestures macros). It essentially
Tilt calibration no longer fixes the tilt angles
Recently I’ve been using a significantly skewed desk (the bolts weren’t as tight as I thought they were). After leveling it, I tried to calibrate my Z1, but the progress bar got stuck. I moved the mouse by mistake, and decided I might as well shut down
Adding Support for the Function Key on a keyboard in the software
I think it would be useful for those who have smaller keyboards or use special keypads for games and the like if the we were able to map the function key to a button on the mouse. Example would be for a game that uses the number keys (0-9) and the respective
Thumb buttons
Can I program the thumb buttons for ESC and PTT
Swiftpoint Z gen 2 suggestions
Hello folks and Bryce, Below are some suggestions about upcoming SZgen2 (based on Gen1 experience), ranged from major to minor. --hope I'll be clear enough First part will be based on comparison with Roccat Tyon (on par with SZ in terms of "favorite mouse")
scroll sensitivity issue
hey, even with the minimum sensitivity its near impossible to use. how can we use less than 1? i want every 4 bumps on the wheel to be 1 scroll action.
Simple Mode - Drag & Drop Keybinds
Hi, I play Fortnite so I'm constantly messing with new settings and keybinds. In Simple Mode a convenient and easy feature to have would be to be able drag and drop my existing keybinds into a new mouse keybind slot. It should swap with the existing keybind
Swiftpoint Z shell project
A year ago, I made this post requesting STL files so I could make a new top shell better suited to fingertip grip. A year later and the bulk of the Z is bothering me even more as I have further improved my mouse control for FPS games and feel even more
Swiftpoint app
I install swiftpoint app on my ipad pro (M2, sixth generation). When I open the app, the app will not open. The screen shows "Bluetooth connection". Waiting for mouse. Is the app working?
Profile Auto-Switch in Starfield, Specifically
Hullo everyone! I noticed some difficulty getting auto-switch to work in Starfield, having to alt-tab out and back in once a session; once I started using SpecialK to fix its HDR problems, auto-detect never worked. I did enable logging and added some
Why don't X1 users get the productivity wheel too?
Title. I don't know alot about the feature or the history of X1 and P3, so I won't make up a whole story.
Mapping The L/R Mouse Buttons
I Play Shooters (SE5) And I Use My LMB To Shoot And My RMB To Scope. I Can Add A Deep Press Command To Both. Any Suggestions On What Commands To Use? I Hate To See Mouse Commands Go To Waste.
Does the Swiftpoint P3 Control Panel impact power settings?
I noticed after I installed the Swiftpoint P3 Control Panel on my work computer that the timed screen lock stopped. Now the screen will stay on indefinitely even if I walk away for hours. I had noticed this about my personal computer which has had the
Deep click question
I setup left click deep click to change weapons in Fortnite however if I press the left click too quickly it changes from shortgun to smg without shooting the shotgun. Is there a way to make sure shogun shoots before switching to the smg? 2 is my shotgun
Next Page