Rebinding scroll up/down issue
Hello. Long time user of Swiftpoint Z, mouse is really addictive. Never regret to invest in it during Kickstarter campaign. I found interesting issue with the driver (fresh installation). When I reassign scroll up/down in new driver it automatically assigned
Block top-level button assignments on nested press?
An analogue is Razer's Hypershift: In the scenario that I have actions defined to a button at the top-level (LBP), and I have actions defined to that button (LBP-B) nested within another button (RBP) (so, 'RBP > LBP-B'), I need to be able to toggle in
Hidden text in nested buttons.
Greetings, Is it possible to recover a text that is assigned to either a mouse button or movement that is nested deep in about six or so button combinations without having access to the .spcf file?
Nest scroll wheel action inside a scroll wheel action?
Hello, I am using tilt + scroll wheel push/pull (endless loop for scroll down / up) to do a free-scrolling type interaction and it's working very well. The only problem is stopping the scroll. Right now I have to either tilt the mouse back or assign a
Enable mapping of analog inputs to mouse movement
Xinput was planned in the beginning, but did not make the cut. Over time more people desired it and I do as well. When it is on list of features to implement in whatever update it ends up coming in I would like to ask if not only thumbstick tilt analog
Swiftpoint Z - scrolling is too sensitive on OSX unless I replug it
Hello, I have this problem on OSX which is mentioned here by some Linux users too - the scroll gets jumpy sometimes, unless I replug the mouse. I is there a way to force-restart it for example? Replugging works but is a bit cumbersome. Loving Swiftpoint-Z
Buttons Keep repeating actions but the button is only pressed once
My "z" mouse has been repeating actions even though I only press the button once. For example: my Bottom Thumb button is "CTRL left" and its set to "press" because I need to hold it down. I have been doing this for the past 1 and a half years of owning
How do I create a profile that turns off the Swiftpoint Z?
Hi there, I need to create a profile that basically switches the mouse OFF, but still able to switch to the next profile to switch back ON. I haven't found any settings* that would allow for that. Is it possible? *Possible to set sensitivity to its lowest
Key-binds not retained after PC reboots
I added something to my Fingertip buttons, but after every Windows restart, as soon, as I save in the software, those keybinds are gone, Which kind of comes in tandem with that from time to time, the scroll wheel needs to be turned twice to switch directions(which
Can't add "scroll down" to button
Adding scroll input defaults to Left click. Happens when adding scroll to any button. See video.
More analog binds for deep click.
As far as I can figure, you can only bind a single slider for deep clicks. Would be nice to bind all analog axis to deep clicks.
OLED Screen non-responsive
I've got a problem with my Z at home: OLED screen is showing nothing. I've attempted to program in various things to display, but I'm getting nothing.
Issue with linked applications not activating profile
Heya! Ok. I've come across a problem. To preface: I have subprofiles under Desktop. Currently it's just Browsers and XYplorer under there as the export from the old driver didn't play nice. Also subprofiles under Games. yeah i love subprofiles, heh. When
Windows update wiped configs
Situation: This computer moved from Swiftpoint to X1, I do not believe I had ever saved profile to mouse. Windows update, rebooted and mouse did not work. Thankfully, this is a laptop so I had a trackpad to open X1 and I see that everything inside is
Nested Deep-Click
Something I encountered today: you can not create nested deep clicks anymore
Custom output actions added to profile switch lost when X1 Control Panel closed.
Another thing I encountered is, that if I add an output action to the general settings(like flash current profile) it is removed, when I start up my pc again. Aparrently it is still saved, as the mouse still flashes the profile when switching, but as
Possibly defective buttons
I purchased a Swiftpoint Z on the 29th of December last year. I have yet to use it much at all, when I discovered the bottom edge button feels basically linear compared to the top edge button. The same is also true for the right fingertip button. I have
Logo-lighting
I recently got myself a secondary Z and realized that when you try to make the logo yellow it seems as if the blue level is way too high even though the RGB values are set to 255 255 and 0. I am just curious if you changed something regarding that in
Keep losing profile output actions
I use expert mode to program my profiles, and due to that setting a Logo Color on a profile requires also re-implementing the output OLED -> Flash -> Current Profile. For whatever reason, I keep losing that output on my profiles. Today it happened as
how to reactivate the radial menu, that once appeared when clicking rear button ??
when my swiftpoint was new, I had a radial menu when pressing the rear button, very usefull for Copy/past. But this desapeared after a few days. How to activate this again ?
Importing SPCF's into the X1 control panel?
I recently grabbed one of the Arma 3 profiles to experiment with the tilt / lean feature in a game, but thus far I am not exactly sure how to import the SPCF. So far I have tried 4 things to no avail: Opening the spcf with Swiftpoint X1 Control Panel.exe
a bug，Please fix it as soon as possible
For details, please see the video attached. This is a bug my friend encountered. just ignore the sound in the video. The bug appears at the 32nd second. I tried using the same configuration and encountered the same bug.
Scrolling affects settings that use sliders and combo-boxes / Profile exports not locked to spcf file type
Well, since the beta testing is out, here are my 2 cents to the new Software: First of all, I like it, even though its not that different from the old one, when you are in expert mode, but naming stuff, LOVING IT 2 things I encountered: the possibility
Can a mapping be setup to only output if its input is active for a set amount of time?
is it possible to add something like "IF I tilt for 1 sec, execute." I want something I don't accidentally trigger tilt while using my mouse. So I want to do some conditional tilt where I have to hold it for 1 sec to trigger the event, else doesn't trigger.
my Z 's left trigger pull button has Unusual sound
The normal situation is two ticking sounds, but mine has three times, and the third time after the rebound, there is a very subtle sense of passage, but there is a very obvious sound. Although it does not affect the use, but it makes me worry about its
Tracer Macro Support
Just got my tracer and am trying to move over from the z but am missing one key featue. Macros. Will this be supported on the new software like on the swiftpoint driver?
Power Switch Middle Setting (PadPoint/PenPoint)
Hi there Apparently, the PadPoint's power button has three positions. What is the middle position for? Best regards, Markus
Changing P3 Control Panel options have no effect
I got the ProPoint today and have installed the latest software version onto a laptop running Windows 20H2. I'm using the USB charger/receiver rather than Bluetooth. None of the options in the P3 Control Panel have any effect on the mouse (eg can't change
Can't add deep click to right mouse button?
I don't have the option to add a deep click to the right mouse button. I can add it to the left, and left tip, but not right or right tip.
Mouse detected as kinetis bootloader
The mouse is not working. When i go to save file to the mouse it says no mouse connected. I have pugged it in to all the usb ports on my computer. When i go in settings it shows up as kinetis bootloader. It does not even give any imputes and wont let
Swiftpoint Z stuck in bootloader after failed firmware update.
Am running win10 with latest updates. I was in the X1 beta program, using z. Updated the z firmware. updated the X1 control program released a few days ago that program must have a bug. went into a constant loop trying to upgrade the z firmware but only ever getting 2/5ths of the way. my Z is now bricked. No coloured logo, no oled. reset does not work (l+r while inserting usb) reboot does not work Reinstall does not work. using a different computer does not work please provide a solution asap.
Scroll Left / Scroll Right for applications like OneNote (middle mouse button or using global tilt sensor)?
I was a little surprised to discover the Swiftpoint Z doesn't seem to have a left and right tilt button on the mouse wheel like the G700s. Are there any plans with future models to include this functionality? In the interim, is there any good way to make
Ceramic Mouse feet make the swiftpoint Z glide so much better.
Using ceramic mouse feet with the swift Z makes it glide better than new. the pads wore out so i removed then and i installed lexip Mo42's onto the same places (filed down the plastic to make them fit smoothly) and it makes the moderately heavy weight
Firmware Update "Please ensure that you have closed SwiftpointDriver." message
I seem to be going in circles trying to update the firmware on my new "Z" mouse. Either the upgrade app closes without doing anything or the mouse locks up and I get a failed update message. What exactly is the "SwiftpointDriver"? A dialog tells me to
Should I remove the old Swiftpoint Driver?
Just took the jump to X1, but it didn't utomagically uninstall the old driver. It's just to uninstal it right?
High DPI - for Engineering (and gaming)
I have been lusting after SwiftPoint products for several yeas now, but my use case (CAD and CGI) requires very high precision. I have found in the knowledge base a mention that ProPoint has DPI of 1200, while an article about the profiles implies that
Can't ProPoint support multi-pairing?
Hi, I use an iPad in addition to a Windows PC, but it's very cumbersome to have to re-pairing each time. Is there any way to solve it? or do you have any plans to solve these?
Unable to switch profiles in config mode
I have a Swiftpoint Z and just upgraded to using the X1 software. Everything seems to be working as expected except I can no longer switch profiles when in the tilt 25 degrees config mode. Other config mode buttons work such as changing DPI or OLED. I
Auto profile switching out of sync
I constantly stumble in to issue with profile auto switch not doing it's job, I have gone thru numerous hardware/software combos and it appears that every manufacturer has this issue, like that's some kind of global system limitation or whatever. Maybe
Swifpoint Propoint as a gaming mouse.
Hello, I would like to know if the sensor is good enought to keep speed movement on "firt person shooter" game"? Also ,I would like to know if this is possible to reduce the dpi of the Propoint mouse to 800 or 400 per exemple? Cant wait for your answer
Next Page