Issue with linked applications not activating profile
Heya! Ok. I've come across a problem. To preface: I have subprofiles under Desktop. Currently it's just Browsers and XYplorer under there as the export from the old driver didn't play nice. Also subprofiles under Games. yeah i love subprofiles, heh. When
Windows update wiped configs
Situation: This computer moved from Swiftpoint to X1, I do not believe I had ever saved profile to mouse. Windows update, rebooted and mouse did not work. Thankfully, this is a laptop so I had a trackpad to open X1 and I see that everything inside is
Nested Deep-Click
Something I encountered today: you can not create nested deep clicks anymore
Custom output actions added to profile switch lost when X1 Control Panel closed.
Another thing I encountered is, that if I add an output action to the general settings(like flash current profile) it is removed, when I start up my pc again. Aparrently it is still saved, as the mouse still flashes the profile when switching, but as
Keep losing profile output actions
I use expert mode to program my profiles, and due to that setting a Logo Color on a profile requires also re-implementing the output OLED -> Flash -> Current Profile. For whatever reason, I keep losing that output on my profiles. Today it happened as
Scrolling affects settings that use sliders and combo-boxes / Profile exports not locked to spcf file type
Well, since the beta testing is out, here are my 2 cents to the new Software: First of all, I like it, even though its not that different from the old one, when you are in expert mode, but naming stuff, LOVING IT 2 things I encountered: the possibility
my Z 's left trigger pull button has Unusual sound
The normal situation is two ticking sounds, but mine has three times, and the third time after the rebound, there is a very subtle sense of passage, but there is a very obvious sound. Although it does not affect the use, but it makes me worry about its
Can't add deep click to right mouse button?
I don't have the option to add a deep click to the right mouse button. I can add it to the left, and left tip, but not right or right tip.
Mouse detected as kinetis bootloader
The mouse is not working. When i go to save file to the mouse it says no mouse connected. I have pugged it in to all the usb ports on my computer. When i go in settings it shows up as kinetis bootloader. It does not even give any imputes and wont let
Swiftpoint Z stuck in bootloader after failed firmware update.
Am running win10 with latest updates. I was in the X1 beta program, using z. Updated the z firmware. updated the X1 control program released a few days ago that program must have a bug. went into a constant loop trying to upgrade the z firmware but only ever getting 2/5ths of the way. my Z is now bricked. No coloured logo, no oled. reset does not work (l+r while inserting usb) reboot does not work Reinstall does not work. using a different computer does not work please provide a solution asap.
Firmware Update "Please ensure that you have closed SwiftpointDriver." message
I seem to be going in circles trying to update the firmware on my new "Z" mouse. Either the upgrade app closes without doing anything or the mouse locks up and I get a failed update message. What exactly is the "SwiftpointDriver"? A dialog tells me to
Unable to switch profiles in config mode
I have a Swiftpoint Z and just upgraded to using the X1 software. Everything seems to be working as expected except I can no longer switch profiles when in the tilt 25 degrees config mode. Other config mode buttons work such as changing DPI or OLED. I
Auto profile switching out of sync
I constantly stumble in to issue with profile auto switch not doing it's job, I have gone thru numerous hardware/software combos and it appears that every manufacturer has this issue, like that's some kind of global system limitation or whatever. Maybe
Mouse stop working if Swiftpoint not running?
I discovered that the mouse completely stops working if you close the Swiftpoint X1 software (completely quit the app from the system tray). I know probably everyone has it running all the time, but there is some time you have to close or restart the
Firmware update time out
2 just Local\Swiftpoint X1 Control Panel dont Local\SwiftpointDriver in china
Firmware update failure (could not unlock)
I downloaded the new software, and started the firmware update for my Z as prompted, but my mouse does not turn back on during this update, I have to remove the USB and insert it again, which cancels the update. I made sure the old software was entirely
[War Thunder] Game recognises mouse but does not recognise joystick inputs
Game is War Thunder. Mouse is recognised as a potential joystick but when configing controls, the joystick inputs are not recognised Mouse is displaying angles in oled display. Is there a way to determine if pc is recognising joystick inputs.
not be able to tilt and scroll for zoom in pdf for swiftpro
i have a problem to zoom in/out pdf when tilt and scroll style of zoom in/out even already set in control panel
Unable to update Z firmware for X1 control panel [solved]
After installing the X1 control panel, I was unable to update the Z's firmware. I tried twice and failed both times. I then disconnected my G600 mouse and was able to update firmware. I didn't suspect the G600 at first as I had already updated my work
Firmware update fails after installing X1 for a Swiftpoint Z -- solution
Hi, I ran into a problem but I figured it out and thought it might help other people. After I updated from the old Swiftpoint Z software to the new X1 software I kept getting an "Update Failed" error when trying to update the driver and firmware. After trying several things, like rebooting, manually uninstalling the older software, etc., I finally thought to plug the mouse into a USB 2 port instead of the USB 3 port it's usually plugged into. After that, the update worked. I'm not sure if it's
Pasted actions not always displaying correctly/crash after pasting actions.
Copy pasting actions is bugged. But sometimes it works like it should.
I can't scroll diagonally with P3 control panel
Hi guiys, Recently I finally got my propoint and I really love this product! However, there is only one thing I can't accept. When using propoint with P3 control panel, I can't scroll diagonally. I can scroll either vertically or horizontally. But once I terminate P3 control panel, it allows to scroll diagonally on any programms. Is it a known bug or does it happen only to me?