Swiftpoint Z2 - Left Trigger Pull just not working
Received my Swiftpoint Z2 last week and finally got a chance to unbox and program it, and the Left Trigger Pull is just not working. Anyone else had an issue with one of the buttons? I've had mice where it happens after 12+ months of major use, but not
Winsows 10 to 11. Can't load my backup file.
Hi, i went to Windows 11 and installed the swiftpoint app. I made a backup a few months back but I can't upload it. Do I have to remap everything, or is there a way to load the backup into the app? Thanks
When I hold right click the left click isn't registered.
As said in the title when i hold the right click and try to press left click its not registered (Essentially I can't use the scope), I also tested it with the button tester profile and its blinking but its hard to tell if it actually works.
The order did not arrive and the money for it was not returned
I ordered a mouse on September 2 but it never arrived, the local delivery service did not deliver it and it was sent back to the sender. I want to request back the money I paid for the mouse that was not received.
Mouse wheel broken?
Hello, i bought a swiftpoint z2 about 3 or 4 months ago, and just today my mouse wheel is "free spinning*" (it wasn't doing that yesterday) I can't hear the small clicketing sound that it usually does when scrolling, button works perfectly fine, scrolling
Scroll notch missed when changing scroll direction.
Hi I have had an issue regarding the scroll wheel of the Swiftpoint Z Sometimes, the scroll wheel just does nothing, let me explain. Let's say I'm scrolling down, the context doesn't matter, it can be on a web page, on Discord, in a game. If I want to
Swiftpoint Z2 is cycling between connected and disconnect
recently received my z2 and when I plugged it in the x1 control panel wanted me to update the firmware and when I did it "finished" updating the firmware and then the mouse wouldn't move and started disconnecting and reconnecting. Ive tried plugging it
Auto Profile Switching not recognizing Sketchup Pro
I cant get the Auto Swittching to recognize Sketchup Pro 2021 (this is the desktop software installed on my computer with .exe file not the web version) I think it was at some point, but I am not 100% sure that is true. curious if anyone else has issue
How do I make Z2 profiles available from memory? (for use on a different PC or Mac)
Hi I received my Z2. After playing around for a few hours, I could not get the profiles to work from memory. When I switch to memory, it defaults to Desktop 1200 DPI. I have set a custom profile, renamed it, and saved it in memory more than ten times
Tilt for Scroll
Apologies up front I just received my Z2 and have many questions but will be keeping them individually posted. I was looking forward to being able to use the tilt left and right feature of the z2 to scroll left and right and I can do this but i have tilt
Swiftpoint app
I install swiftpoint app on my ipad pro (M2, sixth generation). When I open the app, the app will not open. The screen shows "Bluetooth connection". Waiting for mouse. Is the app working?
Profile Auto-Switch in Starfield, Specifically
Hullo everyone! I noticed some difficulty getting auto-switch to work in Starfield, having to alt-tab out and back in once a session; once I started using SpecialK to fix its HDR problems, auto-detect never worked. I did enable logging and added some
Does the Swiftpoint P3 Control Panel impact power settings?
I noticed after I installed the Swiftpoint P3 Control Panel on my work computer that the timed screen lock stopped. Now the screen will stay on indefinitely even if I walk away for hours. I had noticed this about my personal computer which has had the
Looks like Swiftpoint Z no longer support Copy and Paste commands
I don´t, and really don´t want to use CTRL+C and CTRL+V I was able to select Copy and Paste feature from the commands available on the APP (Copy and for other button, Paste) Seems like these two features are now missing. Am I correct, and these two commands
"Repeat From" outputs "Times" value reset to 0 when its output list is viewed.
Steps to reproduce: Add a "Repeat From" output to any mapping. Set its "Times" attribute to any non-zero number. Save settings. Switch view to any other profile, then back to the profile with the "Repeat From" output. Its loop counter should still be
Repeat From Bug
I had some weird behavior before when I edited a button that looped a certain amount of times only to change back to infinite looping when i clicked to inspect it. I finally figured out tonight what was going was a bug that only occurred when i swapped
Swiftpoint X1 Control Panel not working
I've tried uninstalling and reinstalling, restarting my computer and changing install location, however the software will not start.
Import doubles bindings
I noticed today: when I import a saved profile, on one of the mappings, it doubles every keybinding, so I have lmb bound twice, rmb twice and so on
Registration
Every time I turn on my laptop, I get a pop up reminder from the swiftpoint software to register my swiftpoint mouse. I remember registering it when I first set it up (a few months ago). I have logged in to my swiftpoint account and cannot find anyplace
Swiftpoint X1 won't "start" with windows (10)
Hello there! I've been enjoying this mice for the last week ^^ (Swift-point Z) But I've been dealing with this issue that, every time I restart the computer, the program doesn't start, and because of this, I don't have the "switch profiles automatically"
Rebinding scroll up/down issue
Hello. Long time user of Swiftpoint Z, mouse is really addictive. Never regret to invest in it during Kickstarter campaign. I found interesting issue with the driver (fresh installation). When I reassign scroll up/down in new driver it automatically assigned
Buttons Keep repeating actions but the button is only pressed once
My "z" mouse has been repeating actions even though I only press the button once. For example: my Bottom Thumb button is "CTRL left" and its set to "press" because I need to hold it down. I have been doing this for the past 1 and a half years of owning
Can't add "scroll down" to button
Adding scroll input defaults to Left click. Happens when adding scroll to any button. See video.
OLED Screen non-responsive
I've got a problem with my Z at home: OLED screen is showing nothing. I've attempted to program in various things to display, but I'm getting nothing.
Issue with linked applications not activating profile
Heya! Ok. I've come across a problem. To preface: I have subprofiles under Desktop. Currently it's just Browsers and XYplorer under there as the export from the old driver didn't play nice. Also subprofiles under Games. yeah i love subprofiles, heh. When
Windows update wiped configs
Situation: This computer moved from Swiftpoint to X1, I do not believe I had ever saved profile to mouse. Windows update, rebooted and mouse did not work. Thankfully, this is a laptop so I had a trackpad to open X1 and I see that everything inside is
Nested Deep-Click
Something I encountered today: you can not create nested deep clicks anymore
Custom output actions added to profile switch lost when X1 Control Panel closed.
Another thing I encountered is, that if I add an output action to the general settings(like flash current profile) it is removed, when I start up my pc again. Aparrently it is still saved, as the mouse still flashes the profile when switching, but as
Scrolling affects settings that use sliders and combo-boxes / Profile exports not locked to spcf file type
Well, since the beta testing is out, here are my 2 cents to the new Software: First of all, I like it, even though its not that different from the old one, when you are in expert mode, but naming stuff, LOVING IT 2 things I encountered: the possibility
Mouse detected as kinetis bootloader
The mouse is not working. When i go to save file to the mouse it says no mouse connected. I have pugged it in to all the usb ports on my computer. When i go in settings it shows up as kinetis bootloader. It does not even give any imputes and wont let
Swiftpoint Z stuck in bootloader after failed firmware update.
Am running win10 with latest updates. I was in the X1 beta program, using z. Updated the z firmware. updated the X1 control program released a few days ago that program must have a bug. went into a constant loop trying to upgrade the z firmware but only ever getting 2/5ths of the way. my Z is now bricked. No coloured logo, no oled. reset does not work (l+r while inserting usb) reboot does not work Reinstall does not work. using a different computer does not work please provide a solution asap.
Firmware Update "Please ensure that you have closed SwiftpointDriver." message
I seem to be going in circles trying to update the firmware on my new "Z" mouse. Either the upgrade app closes without doing anything or the mouse locks up and I get a failed update message. What exactly is the "SwiftpointDriver"? A dialog tells me to
Unable to switch profiles in config mode
I have a Swiftpoint Z and just upgraded to using the X1 software. Everything seems to be working as expected except I can no longer switch profiles when in the tilt 25 degrees config mode. Other config mode buttons work such as changing DPI or OLED. I
Mouse stop working if Swiftpoint not running?
I discovered that the mouse completely stops working if you close the Swiftpoint X1 software (completely quit the app from the system tray). I know probably everyone has it running all the time, but there is some time you have to close or restart the
Firmware update failure (could not unlock)
I downloaded the new software, and started the firmware update for my Z as prompted, but my mouse does not turn back on during this update, I have to remove the USB and insert it again, which cancels the update. I made sure the old software was entirely
[War Thunder] Game recognises mouse but does not recognise joystick inputs
Game is War Thunder. Mouse is recognised as a potential joystick but when configing controls, the joystick inputs are not recognised Mouse is displaying angles in oled display. Is there a way to determine if pc is recognising joystick inputs.
Unable to update Z firmware for X1 control panel [solved]
After installing the X1 control panel, I was unable to update the Z's firmware. I tried twice and failed both times. I then disconnected my G600 mouse and was able to update firmware. I didn't suspect the G600 at first as I had already updated my work
Pasted actions not always displaying correctly/crash after pasting actions.
Copy pasting actions is bugged. But sometimes it works like it should.