Swiftpoint X1 Control Panel Does not Save any Profiles to Z2 Flash Memory
Whenever I turn on my PC, I have the Swiftpoint software set to auto startup but the software does not auto-start. This then causes the issue that my profiles are not auto-switching when changing programs. The mouse memory is at 16% when I have two profiles
Can't drag across programs
For some reason I cannot get the Z2 to click and drag across programs, it always "lets go" once another window is in focus. I have the left button configured correctly in the Global profile (press and release) and no other profiles change this behaviour.
mouse memory download icon not showing
i have the Z2 mouse and when i go to the profiles and go to upload it to the mouse the icon to do so isnt avabile and says it cant find my mouse even though the cursor is activly working
X1 Control Panel not starting up
My X1 Control application won't startup at all. I've tried to reinstall the application, run in admin mode, restart the PC and nothing will help. Anyone have any solutions for this? Log attached
Beta channel updates incorrectly
It seems switching to the Beta channel ignores the actual software version number. Current stable release is 3.0.8.0, but switching to the Beta channel downgrades to 3.0.7.20 instead of correctly staying on 3.0.8.0
X1 Control Panel UI Scaling
The x1 control panel scaling on a 4k monitor is definitely off. Very hard to read with my eyes. Note: 2k scaling is fine!
Swiftpoint Z2 - Left Trigger Pull just not working
Received my Swiftpoint Z2 last week and finally got a chance to unbox and program it, and the Left Trigger Pull is just not working. Anyone else had an issue with one of the buttons? I've had mice where it happens after 12+ months of major use, but not
Winsows 10 to 11. Can't load my backup file.
Hi, i went to Windows 11 and installed the swiftpoint app. I made a backup a few months back but I can't upload it. Do I have to remap everything, or is there a way to load the backup into the app? Thanks
Pressed mouse buttons release on Profile Switch
Unsure if this (as i consider an issue/bug) is also present in the latest non-beta. I use Automatic Profile Switching, which is what made me realize the issue. This happens e.g when left clicking and holding from an active application bound to a profile,
randomly clicking button
Whenever i slightly tilt my mouse to the right, even sometimes just moving it to the right it will randomly click E and I'm not sure why.
Anti cheat is detecting swiftpoint software as invasive. Does the program detection run constantly?
Hello, I play games with strict anti-cheat like playerunknown's battlegrounds on PC; and one of the programs in question is the swiftpoint Z X1 control software itself, as I'm checking there is no way to turn off the polling for running programs, unless
Changing a mapping in a subprofile modifies the parent's mapping and vice versa
I am using a Z2 mouse with driver 3.0.7.0. I use the X1 control panel in expert mode. I have a general profile for all programs, let's call it A. I have a particular program in which I want to change one of A's mappings to something else, while keeping
Swiftpoint Z 1st Gen random "Exit Config" and buzzing after recent firmware upgrade
Hi there! I have probably 4 Swiftpoint Z (1st gen) mice that I use daily as a radiologist for reading exams. They've been rock solid aside from the middle click issue which is a known thing. However, since I upgraded to the most recent firmware (have
How do I stop the auto-click behavior in the Mac version?
I am using the Mac version and when I install the swiftpoint driver, it automatically clicks on the top of the open window in most applications. In the Finder.app, it will select the first file or folder on its own. I would like to stop this behavior.
Swiftpoint Z tilt back activating randomly
I have an issue where the Swiftpoint Z will think it's tilted back all the way randomly. I have the mouse programmed to flash a custom message on the OLED screen, and change the scroll wheel to shift through songs when tilted backwards 17 degrees, and
How do I make Z2 profiles available from memory? (for use on a different PC or Mac)
Hi I received my Z2. After playing around for a few hours, I could not get the profiles to work from memory. When I switch to memory, it defaults to Desktop 1200 DPI. I have set a custom profile, renamed it, and saved it in memory more than ten times
Tilt for Scroll
Apologies up front I just received my Z2 and have many questions but will be keeping them individually posted. I was looking forward to being able to use the tilt left and right feature of the z2 to scroll left and right and I can do this but i have tilt
Z2 not detected when returning from sleep
New Win 11 install. Changed Z1 for Z2 when it arrived. All seemed to be working just fine but mouse is not detected by X1 software after resuming windows from sleep. Cursor is still working but buttons do not register and logo light is off. Disconnecting
Controller input not detected
I struggle to get controller input detected by external software or games. Windows joycpl also doesn't seem to detect any buttons or sticks, not sure if it ever did or should tho.
Problem updating Firmware on Z1 [already solved]
After updating X1 to 3.0.5.0, I was invited to update the firmware on my Z1. Unfortunately, the firmware update just sat there fore over 10 minutes (and the mouse still worked) so I killed the X1 control panel and restarted it. This condition persisted
Profile Auto-Switch in Starfield, Specifically
Hullo everyone! I noticed some difficulty getting auto-switch to work in Starfield, having to alt-tab out and back in once a session; once I started using SpecialK to fix its HDR problems, auto-detect never worked. I did enable logging and added some
Issue with sub-profiles and modifier key setups
I have a main "desktop" profile where I use top and bottom thumb button as modifier keys (e.g. Front Edge = forward, but Top thumb + front edge = home) and I was hoping to set up a sub-profile where I could add to those. Unfortunately, I've found out
Keypad binds work as actions
Keypad binds act as if numlock is disabled. Numpad 1 = End, Num 2 = Down, etc. Version: 2.0.9.0 Example: Disregard #2 being present, only a visual example.
Swifpoint Z mapping gestures for Solidworks
Hello Swiftpoint Team, I recently purchased a Swiftpoint Z mouse, after looking at some reviews on YouTube. One of the reviews suggested the gyroscopic gestures could also be used for 3D modelling, so I was very interested and eager to try it out, even
Since a recent windows 10 update auto-switch seems to malfunction
Heya. So. this has only been happening since i last updated windows 10. What happens is I'll start a windowed app, like a browser, and after a random amount of time the profile will automatically switch to the default profile. The only way to fix is is
When I make a change in Swiftpoint software, my Z mouse freezes for upwards of thirty seconds
Hi. When I make a change in the Swiftpoint software, like change a mouse button bind, my Swiftpoint Z mouse will completely freeze for upwards of thirty seconds. No buttons work, tilting into config mode doesn't work and the mouse pointer freezes. This
"Repeat From" outputs "Times" value reset to 0 when its output list is viewed.
Steps to reproduce: Add a "Repeat From" output to any mapping. Set its "Times" attribute to any non-zero number. Save settings. Switch view to any other profile, then back to the profile with the "Repeat From" output. Its loop counter should still be
Repeat From Bug
I had some weird behavior before when I edited a button that looped a certain amount of times only to change back to infinite looping when i clicked to inspect it. I finally figured out tonight what was going was a bug that only occurred when i swapped
Cannot Link Profile Switching to "Windows Apps" Games
I've tried changing the ownership and permissions to read the files in the "protected" windows apps files and even though I can access them, the X1 control panel cannot. Even when I run it as admin. I am able to navigate to the folders but when I try
Swiftpoint X1 Control Panel not working
I've tried uninstalling and reinstalling, restarting my computer and changing install location, however the software will not start.
Import doubles bindings
I noticed today: when I import a saved profile, on one of the mappings, it doubles every keybinding, so I have lmb bound twice, rmb twice and so on
Bug in Text String output action
Hi there, i might have found a bug with the output action "Text String". The string which should be entered is (1): KCi{]ar-4eL;TicG9+k9 Actually it writes (2): KCiÜ+arß4eLöTicG9`k9 (just written with the action) I guess its because i have a german keyboard
What directory are profiles saved to?
Something is wrong with Swiftpoint X1 Control Panel and it will not launch. If I had to guess it became corrupted by an unstable overclock. I want to reinstall everything, but I want to backup my profiles first. I don't know what directory my profiles
X1 not auto switching properly with tracer
I recently purchased a tracer and a second z and upgraded to the x1 software and have had nothing but issues with profile auto switching. X1 is ran as admin and when I enter a game I usually have to tab out and back in 1-3 times for it to kick on as well
Swiftpoint X1 won't "start" with windows (10)
Hello there! I've been enjoying this mice for the last week ^^ (Swift-point Z) But I've been dealing with this issue that, every time I restart the computer, the program doesn't start, and because of this, I don't have the "switch profiles automatically"
Key-binds not retained after PC reboots
I added something to my Fingertip buttons, but after every Windows restart, as soon, as I save in the software, those keybinds are gone, Which kind of comes in tandem with that from time to time, the scroll wheel needs to be turned twice to switch directions(which
Can't add "scroll down" to button
Adding scroll input defaults to Left click. Happens when adding scroll to any button. See video.
Issue with linked applications not activating profile
Heya! Ok. I've come across a problem. To preface: I have subprofiles under Desktop. Currently it's just Browsers and XYplorer under there as the export from the old driver didn't play nice. Also subprofiles under Games. yeah i love subprofiles, heh. When
Windows update wiped configs
Situation: This computer moved from Swiftpoint to X1, I do not believe I had ever saved profile to mouse. Windows update, rebooted and mouse did not work. Thankfully, this is a laptop so I had a trackpad to open X1 and I see that everything inside is
Nested Deep-Click
Something I encountered today: you can not create nested deep clicks anymore
Next Page