Pasted actions not always displaying correctly/crash after pasting actions.
Copy pasting actions is bugged. But sometimes it works like it should.
Scrolling affects settings that use sliders and combo-boxes / Profile exports not locked to spcf file type
Well, since the beta testing is out, here are my 2 cents to the new Software: First of all, I like it, even though its not that different from the old one, when you are in expert mode, but naming stuff, LOVING IT 2 things I encountered: the possibility
X1 Control Panel UI Scaling
The x1 control panel scaling on a 4k monitor is definitely off. Very hard to read with my eyes. Note: 2k scaling is fine!
Pressed mouse buttons release on Profile Switch
Unsure if this (as i consider an issue/bug) is also present in the latest non-beta. I use Automatic Profile Switching, which is what made me realize the issue. This happens e.g when left clicking and holding from an active application bound to a profile,
How do I make Z2 profiles available from memory? (for use on a different PC or Mac)
Hi I received my Z2. After playing around for a few hours, I could not get the profiles to work from memory. When I switch to memory, it defaults to Desktop 1200 DPI. I have set a custom profile, renamed it, and saved it in memory more than ten times
"Repeat From" outputs "Times" value reset to 0 when its output list is viewed.
Steps to reproduce: Add a "Repeat From" output to any mapping. Set its "Times" attribute to any non-zero number. Save settings. Switch view to any other profile, then back to the profile with the "Repeat From" output. Its loop counter should still be
Can't add deep click to right mouse button?
I don't have the option to add a deep click to the right mouse button. I can add it to the left, and left tip, but not right or right tip.
Firmware Update "Please ensure that you have closed SwiftpointDriver." message
I seem to be going in circles trying to update the firmware on my new "Z" mouse. Either the upgrade app closes without doing anything or the mouse locks up and I get a failed update message. What exactly is the "SwiftpointDriver"? A dialog tells me to
Firmware update fails after installing X1 for a Swiftpoint Z -- solution
Hi, I ran into a problem but I figured it out and thought it might help other people. After I updated from the old Swiftpoint Z software to the new X1 software I kept getting an "Update Failed" error when trying to update the driver and firmware. After trying several things, like rebooting, manually uninstalling the older software, etc., I finally thought to plug the mouse into a USB 2 port instead of the USB 3 port it's usually plugged into. After that, the update worked. I'm not sure if it's
Firmware update failure (could not unlock)
I downloaded the new software, and started the firmware update for my Z as prompted, but my mouse does not turn back on during this update, I have to remove the USB and insert it again, which cancels the update. I made sure the old software was entirely
Issue with sub-profiles and modifier key setups
I have a main "desktop" profile where I use top and bottom thumb button as modifier keys (e.g. Front Edge = forward, but Top thumb + front edge = home) and I was hoping to set up a sub-profile where I could add to those. Unfortunately, I've found out
Bug in Text String output action
Hi there, i might have found a bug with the output action "Text String". The string which should be entered is (1): KCi{]ar-4eL;TicG9+k9 Actually it writes (2): KCiÜ+arß4eLöTicG9`k9 (just written with the action) I guess its because i have a german keyboard
Swiftpoint X1 Control Panel not working
I've tried uninstalling and reinstalling, restarting my computer and changing install location, however the software will not start.
Cannot Link Profile Switching to "Windows Apps" Games
I've tried changing the ownership and permissions to read the files in the "protected" windows apps files and even though I can access them, the X1 control panel cannot. Even when I run it as admin. I am able to navigate to the folders but when I try
When I make a change in Swiftpoint software, my Z mouse freezes for upwards of thirty seconds
Hi. When I make a change in the Swiftpoint software, like change a mouse button bind, my Swiftpoint Z mouse will completely freeze for upwards of thirty seconds. No buttons work, tilting into config mode doesn't work and the mouse pointer freezes. This
Since a recent windows 10 update auto-switch seems to malfunction
Heya. So. this has only been happening since i last updated windows 10. What happens is I'll start a windowed app, like a browser, and after a random amount of time the profile will automatically switch to the default profile. The only way to fix is is
Swifpoint Z mapping gestures for Solidworks
Hello Swiftpoint Team, I recently purchased a Swiftpoint Z mouse, after looking at some reviews on YouTube. One of the reviews suggested the gyroscopic gestures could also be used for 3D modelling, so I was very interested and eager to try it out, even
Keypad binds work as actions
Keypad binds act as if numlock is disabled. Numpad 1 = End, Num 2 = Down, etc. Version: 2.0.9.0 Example: Disregard #2 being present, only a visual example.
Swiftpoint Z tilt back activating randomly
I have an issue where the Swiftpoint Z will think it's tilted back all the way randomly. I have the mouse programmed to flash a custom message on the OLED screen, and change the scroll wheel to shift through songs when tilted backwards 17 degrees, and
What directory are profiles saved to?
Something is wrong with Swiftpoint X1 Control Panel and it will not launch. If I had to guess it became corrupted by an unstable overclock. I want to reinstall everything, but I want to backup my profiles first. I don't know what directory my profiles
Profile Auto-Switch in Starfield, Specifically
Hullo everyone! I noticed some difficulty getting auto-switch to work in Starfield, having to alt-tab out and back in once a session; once I started using SpecialK to fix its HDR problems, auto-detect never worked. I did enable logging and added some
Problem updating Firmware on Z1 [already solved]
After updating X1 to 3.0.5.0, I was invited to update the firmware on my Z1. Unfortunately, the firmware update just sat there fore over 10 minutes (and the mouse still worked) so I killed the X1 control panel and restarted it. This condition persisted
Z2 not detected when returning from sleep
New Win 11 install. Changed Z1 for Z2 when it arrived. All seemed to be working just fine but mouse is not detected by X1 software after resuming windows from sleep. Cursor is still working but buttons do not register and logo light is off. Disconnecting
Mouse stop working if Swiftpoint not running?
I discovered that the mouse completely stops working if you close the Swiftpoint X1 software (completely quit the app from the system tray). I know probably everyone has it running all the time, but there is some time you have to close or restart the
Swiftpoint X1 Control Panel Does not Save any Profiles to Z2 Flash Memory
Whenever I turn on my PC, I have the Swiftpoint software set to auto startup but the software does not auto-start. This then causes the issue that my profiles are not auto-switching when changing programs. The mouse memory is at 16% when I have two profiles
[War Thunder] Game recognises mouse but does not recognise joystick inputs
Game is War Thunder. Mouse is recognised as a potential joystick but when configing controls, the joystick inputs are not recognised Mouse is displaying angles in oled display. Is there a way to determine if pc is recognising joystick inputs.
Can't add "scroll down" to button
Adding scroll input defaults to Left click. Happens when adding scroll to any button. See video.
X1 not auto switching properly with tracer
I recently purchased a tracer and a second z and upgraded to the x1 software and have had nothing but issues with profile auto switching. X1 is ran as admin and when I enter a game I usually have to tab out and back in 1-3 times for it to kick on as well
Repeat From Bug
I had some weird behavior before when I edited a button that looped a certain amount of times only to change back to infinite looping when i clicked to inspect it. I finally figured out tonight what was going was a bug that only occurred when i swapped
Swiftpoint X1 won't "start" with windows (10)
Hello there! I've been enjoying this mice for the last week ^^ (Swift-point Z) But I've been dealing with this issue that, every time I restart the computer, the program doesn't start, and because of this, I don't have the "switch profiles automatically"
Key-binds not retained after PC reboots
I added something to my Fingertip buttons, but after every Windows restart, as soon, as I save in the software, those keybinds are gone, Which kind of comes in tandem with that from time to time, the scroll wheel needs to be turned twice to switch directions(which
Unable to update Z firmware for X1 control panel [solved]
After installing the X1 control panel, I was unable to update the Z's firmware. I tried twice and failed both times. I then disconnected my G600 mouse and was able to update firmware. I didn't suspect the G600 at first as I had already updated my work
Issue with linked applications not activating profile
Heya! Ok. I've come across a problem. To preface: I have subprofiles under Desktop. Currently it's just Browsers and XYplorer under there as the export from the old driver didn't play nice. Also subprofiles under Games. yeah i love subprofiles, heh. When
Keep losing profile output actions
I use expert mode to program my profiles, and due to that setting a Logo Color on a profile requires also re-implementing the output OLED -> Flash -> Current Profile. For whatever reason, I keep losing that output on my profiles. Today it happened as
Controller input not detected
I struggle to get controller input detected by external software or games. Windows joycpl also doesn't seem to detect any buttons or sticks, not sure if it ever did or should tho.
Nested Deep-Click
Something I encountered today: you can not create nested deep clicks anymore
Import doubles bindings
I noticed today: when I import a saved profile, on one of the mappings, it doubles every keybinding, so I have lmb bound twice, rmb twice and so on
Windows update wiped configs
Situation: This computer moved from Swiftpoint to X1, I do not believe I had ever saved profile to mouse. Windows update, rebooted and mouse did not work. Thankfully, this is a laptop so I had a trackpad to open X1 and I see that everything inside is
Unable to switch profiles in config mode
I have a Swiftpoint Z and just upgraded to using the X1 software. Everything seems to be working as expected except I can no longer switch profiles when in the tilt 25 degrees config mode. Other config mode buttons work such as changing DPI or OLED. I
Auto profile switching out of sync
I constantly stumble in to issue with profile auto switch not doing it's job, I have gone thru numerous hardware/software combos and it appears that every manufacturer has this issue, like that's some kind of global system limitation or whatever. Maybe
Next Page