Auto Profile Switching not recognizing Sketchup Pro
I cant get the Auto Swittching to recognize Sketchup Pro 2021 (this is the desktop software installed on my computer with .exe file not the web version) I think it was at some point, but I am not 100% sure that is true. curious if anyone else has issue
Swiftpoint Z tilt back activating randomly
I have an issue where the Swiftpoint Z will think it's tilted back all the way randomly. I have the mouse programmed to flash a custom message on the OLED screen, and change the scroll wheel to shift through songs when tilted backwards 17 degrees, and
How do I make Z2 profiles available from memory? (for use on a different PC or Mac)
Hi I received my Z2. After playing around for a few hours, I could not get the profiles to work from memory. When I switch to memory, it defaults to Desktop 1200 DPI. I have set a custom profile, renamed it, and saved it in memory more than ten times
Tilt for Scroll
Apologies up front I just received my Z2 and have many questions but will be keeping them individually posted. I was looking forward to being able to use the tilt left and right feature of the z2 to scroll left and right and I can do this but i have tilt
A very simple solution to the movement resistance issues (probably should be in the instructions).
I didn't see any instructions for it, but you have to remove the thin plastic films on all of the surfaces on the bottom of your mouse that come in contact with your mousepad. It's not obvious just by looking at it, as there aren't any tabs to facilitate
[Linux] Auto Long Press Click not working
Hi ! I'm trying to configure an Auto-Click on a button on my Z2 and I can't get it to work... I can't configure it. (short auto-click works) Here is my 'script' for my long auto click. Long Auto Click Where is the problem please?
Z2 Fingertip buttons are too large
I had a Z1 and they were small rubber affairs, much more discreet. The Z2 fingertip buttons are I'm sure trying to be helpful but I keep fouling them all the time and the paddles extend quite far forward. My wife has smaller fingers and was experiencing
Z2, Only Edge buttons working
Just got my Z2 a few days ago; I love this mouse and everything has worked fine until now. Stepped away from my computer for a few hours but when I got back none of the buttons on the mouse worked with the exception of the profile switcher and screenshot-bound
Z2 not detected when returning from sleep
New Win 11 install. Changed Z1 for Z2 when it arrived. All seemed to be working just fine but mouse is not detected by X1 software after resuming windows from sleep. Cursor is still working but buttons do not register and logo light is off. Disconnecting
Controller input not detected
I struggle to get controller input detected by external software or games. Windows joycpl also doesn't seem to detect any buttons or sticks, not sure if it ever did or should tho.
Problem updating Firmware on Z1 [already solved]
After updating X1 to 3.0.5.0, I was invited to update the firmware on my Z1. Unfortunately, the firmware update just sat there fore over 10 minutes (and the mouse still worked) so I killed the X1 control panel and restarted it. This condition persisted
Tilt calibration no longer fixes the tilt angles
Recently I’ve been using a significantly skewed desk (the bolts weren’t as tight as I thought they were). After leveling it, I tried to calibrate my Z1, but the progress bar got stuck. I moved the mouse by mistake, and decided I might as well shut down
scroll sensitivity issue
hey, even with the minimum sensitivity its near impossible to use. how can we use less than 1? i want every 4 bumps on the wheel to be 1 scroll action.
Swiftpoint app
I install swiftpoint app on my ipad pro (M2, sixth generation). When I open the app, the app will not open. The screen shows "Bluetooth connection". Waiting for mouse. Is the app working?
Profile Auto-Switch in Starfield, Specifically
Hullo everyone! I noticed some difficulty getting auto-switch to work in Starfield, having to alt-tab out and back in once a session; once I started using SpecialK to fix its HDR problems, auto-detect never worked. I did enable logging and added some
Does the Swiftpoint P3 Control Panel impact power settings?
I noticed after I installed the Swiftpoint P3 Control Panel on my work computer that the timed screen lock stopped. Now the screen will stay on indefinitely even if I walk away for hours. I had noticed this about my personal computer which has had the
Issue with sub-profiles and modifier key setups
I have a main "desktop" profile where I use top and bottom thumb button as modifier keys (e.g. Front Edge = forward, but Top thumb + front edge = home) and I was hoping to set up a sub-profile where I could add to those. Unfortunately, I've found out
Wheel Menu opening Notepad not working correctly
Opening Notepad using Windows by either using the Start Menu or search will always open Notepad correctly. However, when opening Notepad using the Wheel Menu, it always tries to open a non-existent file name C:\SESSION:*.txt where * is some random name
誤作動
マウスを使用している時、OUTLOOKでキーボード入力中に勝手にEnterされてしまう。 その他のアプリでは誤作動無し。
Propoint not working with mac Ventura
I have a Macbook Pro with Ventura OS up to date. My propoint will connect via bluetooth but then stop working after several seconds. I've reset the Propoint. I've tried both bluetooth and USB connections, both unsuccesful. I've been able to use it with
Swiftpoint Tracer - Mouse Wheel Changing Direction and Losing one Count
There seems to be something fishy going on with my Tracer. I will recount what happens in the specific scenario I use it. I'm not 100% sure about other contexts. I use my mice with AutoHotkey, meaning I have some code running in the background that modifies
Swiftpoint Z Keyboard Bindings Not Working
My keyboard bindings on the edge buttons have stopped working after upgrading to Windows 11. I used to assign Left Alt + 7 to the Rear Edge to be used in World of Warcraft. Now it doesn't recognize anything (letters, etc). The button is physically
Keypad binds work as actions
Keypad binds act as if numlock is disabled. Numpad 1 = End, Num 2 = Down, etc. Version: 2.0.9.0 Example: Disregard #2 being present, only a visual example.
Swifpoint Z mapping gestures for Solidworks
Hello Swiftpoint Team, I recently purchased a Swiftpoint Z mouse, after looking at some reviews on YouTube. One of the reviews suggested the gyroscopic gestures could also be used for 3D modelling, so I was very interested and eager to try it out, even
Right trigger double click
I've recently noticed an issue with my Swiftpoint Z's right trigger switch where it will occasionally repeat the output assigned to the button. For my case, I've assigned Ctrl + W, so close tab for web browsers, but maybe every 3-4 times I pull it, it
Since a recent windows 10 update auto-switch seems to malfunction
Heya. So. this has only been happening since i last updated windows 10. What happens is I'll start a windowed app, like a browser, and after a random amount of time the profile will automatically switch to the default profile. The only way to fix is is
When I make a change in Swiftpoint software, my Z mouse freezes for upwards of thirty seconds
Hi. When I make a change in the Swiftpoint software, like change a mouse button bind, my Swiftpoint Z mouse will completely freeze for upwards of thirty seconds. No buttons work, tilting into config mode doesn't work and the mouse pointer freezes. This
Looks like Swiftpoint Z no longer support Copy and Paste commands
I don´t, and really don´t want to use CTRL+C and CTRL+V I was able to select Copy and Paste feature from the commands available on the APP (Copy and for other button, Paste) Seems like these two features are now missing. Am I correct, and these two commands
"Repeat From" outputs "Times" value reset to 0 when its output list is viewed.
Steps to reproduce: Add a "Repeat From" output to any mapping. Set its "Times" attribute to any non-zero number. Save settings. Switch view to any other profile, then back to the profile with the "Repeat From" output. Its loop counter should still be
Repeat From Bug
I had some weird behavior before when I edited a button that looped a certain amount of times only to change back to infinite looping when i clicked to inspect it. I finally figured out tonight what was going was a bug that only occurred when i swapped
Use with Share Mouse
I'm trying to use Share Mouse with my setup, I have a PC on one side and a Mac on the other. Share Mouse allows me to drag and drop between the 2 systems and share a mouse/keyboard. It's a software type KVM. However, the Swiftpoint control panel doesn't
Unable to connect my new SurfacePoint
Hi, I purchased the SurfacePoint and received it yesterday. For some reason I am unable to connect it to my laptop. This laptop was working with my SwiftPoint GT (which the front button is not working and it is old so I bought the new one). At present
Cannot Link Profile Switching to "Windows Apps" Games
I've tried changing the ownership and permissions to read the files in the "protected" windows apps files and even though I can access them, the X1 control panel cannot. Even when I run it as admin. I am able to navigate to the folders but when I try
Swiftpoint X1 Control Panel not working
I've tried uninstalling and reinstalling, restarting my computer and changing install location, however the software will not start.
Oled screen fall off.
Hi The mouse screen fall of (first day of use) still with cable and working. Change or fixing? From Amazon. Except that great mouse for unreal engine.
MMB always at 100% force
I noticed recently that my MMB doesn't behave right, I had a deep click action set at >30% force, with default MMB behavior at <30%. OLED screen shows constant 100% force on MMB with lightest touch now. Also, no less than 60% force on LMB. I guess this
Win 10 won't hibernate with Z/Tracer
Hi since I have been using swift point mice (both Z and Tracer)my computer wont go into hibernation when the computer is left alone I never realised it was the swift point mouse until I unplugged the mouse to do some cable management and within minute
P3 Control Panel crashes after it launches
Hello, I installed the P3 Control Panel but it crashes every time after launching. What I already tried is as follows: installed the latest version SwiftpointP3-V3.6.0.0.msi on my windows 10 ↓ crashed ↓ followed the instruction "Windows P3 Control Panel
Import doubles bindings
I noticed today: when I import a saved profile, on one of the mappings, it doubles every keybinding, so I have lmb bound twice, rmb twice and so on
Bug in Text String output action
Hi there, i might have found a bug with the output action "Text String". The string which should be entered is (1): KCi{]ar-4eL;TicG9+k9 Actually it writes (2): KCiÜ+arß4eLöTicG9`k9 (just written with the action) I guess its because i have a german keyboard
Next Page